it loops around the bottom front of the motor and comes up under the turbo. They are like manifolds put on backwards. One side usually plugs straight in to the turbo, and the other side needs to be routed under the motor to the bottom of the turbo.
What did you do to get both sides of exhaust manifolds to connect up to the turbo? You can't of ran it of one side only? Really interested to see how you done this
Goran Malic All stock internals. Not even opened except tightening of the oilpump. Good engines, use about the same engine setup in my latest build. Garret GT42094R, E85 fuel. 750hp/890nm@1,3bar boost. www.speedhunters.com/2014/07/the-awd-turbo-v8-volvo-super-amazon/
As long as you keep the pressure low under 4000rpm, and have a good mapping it will last a long time. Same engine (stock and unopened) as in the AWD Amazon that gave 640whp at 1,3bar. Sold now but egine still alive after three seasons i on the track. Has destroyed two stock R32 GTR gearboxes, but the engine still holds. Not left in my possession, however. www.speedhunters.com/2014/07/the-awd-turbo-v8-volvo-super-amazon/
![mgk - I Think I’m OKAY (with YUNGBLUD) (Sad Version) [Official Music Video]](http://i.ytimg.com/vi/7AC1uqQLIg4/mqdefault.jpg)
That sounds so dirty, I love it! I want a turbo for my E34 540i...
so beautiful!!!
Insane love it
Nice 👍 m60b40 turbo 💪😍
it loops around the bottom front of the motor and comes up under the turbo. They are like manifolds put on backwards. One side usually plugs straight in to the turbo, and the other side needs to be routed under the motor to the bottom of the turbo.
I want this in my roadster
What did you do to get both sides of exhaust manifolds to connect up to the turbo? You can't of ran it of one side only?
Really interested to see how you done this
Stock engine ?
You have a gearbox 420G ?
You have a Dyno result ?
forged? what is a safe boost pressure on a stock and what size of injectors? :)
Is there a kit or is everything custom?
Hello, nice project, probably expensive too. Can you share what internals did u use? Sleeved block and forged pistons are a must?
Goran Malic All stock internals. Not even opened except tightening of the oilpump. Good engines, use about the same engine setup in my latest build. Garret GT42094R, E85 fuel. 750hp/890nm@1,3bar boost.
www.speedhunters.com/2014/07/the-awd-turbo-v8-volvo-super-amazon/
+TuneitMotorsport Is the engine in the amazon stock internally aswell? Impressive
where have you taken the oil feed and return from dude?
Bleeder at oil pressure sensor.
Vad kär du med för växellåda på denna m60b40? :)
Från E39 530D
Hei. Bruker du triggerhjul eller bruker du original veivakselsensor.? :-)
Japp:-)
what car?
volvo 242 1975
how much HP?
740 at 1,1bar stock engine
stock engine .... but how long by 1.1 bar :D
As long as you keep the pressure low under 4000rpm, and have a good mapping it will last a long time.
Same engine (stock and unopened) as in the AWD Amazon that gave 640whp at 1,3bar. Sold now but egine still alive after three seasons i on the track. Has destroyed two stock R32 GTR gearboxes, but the engine still holds. Not left in my possession, however. www.speedhunters.com/2014/07/the-awd-turbo-v8-volvo-super-amazon/
Ok Nice !!!
What you mean with ,, keep the pressure low under 4000rpm,, ?
When do you have the max torque, HP und whats max rpm ?