Hello, It was fun to watch your video, I just did my M5OD-R1 in my '93 Ranger wiyththe same or very similar kit. Just wanted to mention, at about 13:30 you put the rubber washer inside; mine was on top of the big rubber boot, I think that's where it goes. Best wishes and you have a great family.
Thanks for the info! The kit instructions were basically useless but knock on wood it still shifts great. If we need to do it again I’ll follow your advice 👍👍👍
I was thinking the same thing. Exactly how he was holding it, like an upside down cup to fit over that small boot ring on top to help serve as an extra dust and dirt seal to the inside of the shifter....
love the video just got my self a 92 ranger. I am looking to change the shifter arm or be able to put on a custom knob to be higher and closer to me any recommendations ?
Hello I have a problem with my f150 2003 5 speed shifter when you drive it for 30 to 40 minutes it doesn’t want to shift in to 1st 2nd and reverse, do you think that I need that what you installed?
Hey I’m having a hard time finding the gears in my 1990 Ford F-150 with the 300 straight 6 and 5 speed. Shifter is extra sloppy and impossible to find any gear
I'm always looking at the Reagers to get my information on so I can get the work done on my 93 Explorer Sport their is no other information on the the explorer.
That's basically the same situation this truck had, unfortunately a few months later 5th gear totally blew up and it wouldn't shift into any gear. It went to the scrap yard 🍻🍻🍻🍻🍻
@@116falconer what's the tell tale signs is going out? I feel I have to be very mindful of how I put it into gear, first standard so don't know what to feel for
If your pivot ball goes back in and the shifter does not work--go to this link: ruclips.net/video/zNJsrgdHBek/видео.html. Justin will show you what to do.
Thanks! I am getting ready to do the same job on my '96 Ranger. This sure will help!!
This turned from the 3 stooges does auto repair to 3 men and a baby do auto repair...LMAO. I loved it!!!
You guys are beautiful I like the way ya'll work together, lovely grand child thanks for the vid it helped me on my project.
Hello, It was fun to watch your video, I just did my M5OD-R1 in my '93 Ranger wiyththe same or very similar kit. Just wanted to mention, at about 13:30 you put the rubber washer inside; mine was on top of the big rubber boot, I think that's where it goes. Best wishes and you have a great family.
Thanks for the info! The kit instructions were basically useless but knock on wood it still shifts great. If we need to do it again I’ll follow your advice 👍👍👍
I was thinking the same thing. Exactly how he was holding it, like an upside down cup to fit over that small boot ring on top to help serve as an extra dust and dirt seal to the inside of the shifter....
love the video just got my self a 92 ranger. I am looking to change the shifter arm or be able to put on a custom knob to be higher and closer to me any recommendations ?
Brain surgeons at work, after drinking the bong water.
Love the Bud light can 😁
"If you're hurt my feelings again I'll gonna report ya to u-tube" L.M.A.O.
What happens when you don't have it in neutral when you try to put it back together? Asking for a friend...
Helpfully provided by 'Paul Jebb' below: ruclips.net/video/zNJsrgdHBek/видео.html.
Hello I have a problem with my f150 2003 5 speed shifter when you drive it for 30 to 40 minutes it doesn’t want to shift in to 1st 2nd and reverse, do you think that I need that what you installed?
Hey I’m having a hard time finding the gears in my 1990 Ford F-150 with the 300 straight 6 and 5 speed. Shifter is extra sloppy and impossible to find any gear
I'm always looking at the Reagers to get my information on so I can get the work done on my 93 Explorer Sport their is no other information on the the explorer.
And I'm always looking for explore diffs with disc brakes
What was the original problem? I sometimes can't get the shifter into gear, mostly 1st, 2nd, and R.
That's basically the same situation this truck had, unfortunately a few months later 5th gear totally blew up and it wouldn't shift into any gear. It went to the scrap yard 🍻🍻🍻🍻🍻
@@116falconer what's the tell tale signs is going out? I feel I have to be very mindful of how I put it into gear, first standard so don't know what to feel for
@@JohnJames. if you have a lot of slop in the shifter you probably need bushings 👍👍
@@116falconer wouldn't say slop. There's noticeable engagement, like it doesn't feel smooth
I expected banjo music to start soon,
where can i find that dash cover?? it's awesome
It came with the truck but they’re all over eBay for around $40👍👍👍👍
How's it shift after the replacement?
It felt like new👍👍👍 but 5 months later he lost 5th gear, that has nothing to do with the repair it just sucks.
@@116falconer that's a mix of good and sad news dang. Time to upgrade the transmission
The manual transmission produced by mazda and sent to the ford.
Funny thing is it's a foreign trans but they're still managing to use sae sockets to take the metric m12 nut off 😂😂😂
Nice short shifter you got there 6:50
To be honest this Ranger could be used in a smaller sized truck V8 swap project!
I'm pretty sure that boot goes on top
Yeah, they screwed up up bad!
you sound like the guy from breaking bad
If it's not in neutral it won't shift
OD stands for OverDose
Ayyyeeeeee
It's not Jr the third, dude. If ur Jr, your boy is the third, His boy is the fourth, 'less he puts a stop to the madness.. Dang hillbillies..
Lmao
Only in the USA
America
If your pivot ball goes back in and the shifter does not work--go to this link: ruclips.net/video/zNJsrgdHBek/видео.html. Justin will show you what to do.
You made the mistake of putting that seal on the bottom. It is now down in the transmission. It should have gone on the very top .!
I know I’m late but that rubber seal is what was suppose to go on first wasn’t it?
Drunk
THIS IS THE WORST HOW TO VIDEO I HAVE EVER HEARD
Obscene, low to no class. No need for the obscenities.
How do you remove the shifter knob?