Lee APP Press - Decapping 9mm, Tips, and What I Use and Why
HTML-код
- Опубликовано: 16 июл 2024
- Lee APP Press - Decapping 9mm, Tips, and What I Use and Why.
Subscribe
Jesse B Outdoors Reloading
youtube.com/@jesseboutdoorsre...
Jesse B Outdoors
/ @jesseboutdoors
Email
jesseboutdoors@gmail.com
Patreon
/ jesseboutdoors
Discount Codes
Xtreme Bullets
Discount code:JESSEB10
This will get you 10% off your order. This is a one time use only.
Missouri Bullet Company
Discount Code: JesseB-OD for 5% off
KMS Squared Press Lights
Discount Code: JB10 for 10% off
Kore Essentials Belts
Discount code: JesseBOutdoors10 for -10%
This list contains my affiliate links
Amazon Storefront
www.amazon.com/shop/jessebout...
Midsouth Shooters Supply
bit.ly/463P4qc
Axil - XCOR Discount code JESSEB15
goaxil.com/pages/xcor-affilia...
AXIL - GS EXTREME 2.0 Discount code JESSEB15
goaxil.com/pages/gs-extreme-a...
AXIL - TRACKR™ EARMUFFS Discount code JESSEB15
goaxil.com/pages/trackr-earmu...
Gatorz discount code JESSEB15 for 15% off
www.gatorz.com?aff=jesseB&
GLORYFIRE
shareasale.com/r.cfm?b=224079...
CrossBreed Holsters
bit.ly/3jJElih
N8 Tactical Holsters
bit.ly/3mXnGJH
Tekmat
bit.ly/3dapz0D
Ebay
ebay.us/Vi2k02
Social Media
Facebook
JesseBOutdoo...
Instagram
/ jesse_b_outdoors
Twitter
/ jesseboutd. .
Threads
www.threads.net/@jesse_b_outd...
TruthSocial
truthsocial.com/@JesseBOutdoors
Per RUclips policy and guidelines, all activities performed on this channel are done in a safe and controlled environment. I do not sell firearms or firearms accessories.
![Veeze - F.A.F (ft. Rylo Rodriguez) [Official Music Video]](http://i.ytimg.com/vi/7hlz2S2GmIY/mqdefault.jpg)
Discount Codes
Xtreme Bullets
Discount code:JESSEB10
This will get you 10% off your order. This is a one time use only.
Missouri Bullet Company
Discount Code: JesseB-OD for 5% off
Kore Essentials Belts
Discount code: JesseBOutdoors10 for -10%
This list contains my affiliate links
Amazon Storefront
www.amazon.com/shop/jesseboutdoors
Axil - XCOR Discount code JESSEB15
goaxil.com/pages/xcor-affiliate-special?rfsn=6707681.5a98f4
AXIL - GS EXTREME 2.0 Discount code JESSEB15
goaxil.com/pages/gs-extreme-affiliatte-special?rfsn=6707681.5a98f4
AXIL - TRACKR™ EARMUFFS Discount code JESSEB15
goaxil.com/pages/trackr-earmuffs?rfsn=6707681.5a98f4
Gatorz discount code JO909 for 15% off
www.gatorz.com?aff=jesseB&
GLORYFIRE
shareasale.com/r.cfm?b=2240794&u=3652971&m=135539&urllink=&afftrack=
CrossBreed Holsters
bit.ly/3jJElih
N8 Tactical Holsters
bit.ly/3mXnGJH
Tekmat
bit.ly/3dapz0D
Ebay
ebay.us/Vi2k02
Awesome video! I am looking to purchasing this same press to decap my brass.
It works great once you get it setup right. Thanks for watching.
@@jesseboutdoorsreloading thank you!! Your video was helpful with helping me decide to go this route. I just placed an order for it and also ordered the universal decapping die.
Nice job on the video. My process is essentially the same. The APP rocks for depriming and sizing brass and bullets. I stuck some short pieces of PEX tubing in the holes of the collator to help prevent upside down cases. 🤛🏻🔫🇺🇸
Hey I just got an unexpected package from you 🤣. Thanks!
I use the same process. I universal decap and then tumble. As you stated, it keeps your resize dies cleaner and free from damage.
Yes dies are getting too expensive now to buy. Thanks for watching.
Nice video. I do not know how I survived all these years without this inexpensive tool. The washer is what I have done also. I clean all of my range pick-ups first to remove the sand and rocks in a bucket with some detergent for about 10-15 mins swishing around. sun dry then place all the brass in a container and spray with my alcohol/lanolin lube for easier operation, then clean the die at end of each sizing procedure with some spray gun cleaner. I use my Lee sizing die and can size and deprime about 800-850 cases per hour without any trouble, thanks to the lube making it easier and faster for me. Die instructions say to not use lubes, but I have never had any complication over 40 years of reloading, as long as everything is kept clean. This press has many uses for different operations. If I were a real shooter would have one set up for each caliber, bolted to my bench. I have used my APP for over a year now, weekly and have zero problems with any part or function. I noticed your Lee mold boxes as I have many also, and am still wishing to stumble across a 9mm Hollow Point mold, if anybody knows of one. Thanks for your time.
It is a great affordable press. Thanks for watching.
Thanks Jesse! All clear now
Thanks for watching.
Excellent video my friend 👍👍👍…that APP press is on my Christmas wish list 🙏🙏🙏
It’s a good one to have 👍🇺🇸
I have been thinking about getting one of these cheap chintzy Lee Auto Processing Presses just to do the de-capping process only, cause I hate the idea of trashing out a good press with the de-priming phase. Or I could even get a Hornady or other type Lee auto indexing progressive press if their quality is far better. Basically, I just want a press to de-prime on that can auto feed the cases as well as auto eject them into a container before cleaning them.
The APP is great for that.
Wish mine ran that smooth. I have to keep pulling the red follower back so the case will drop. Used a nickle for spacing.
Is your spring binding?
Your nickel is too thick. 1/16" for spacing. I use a fender washer. Lots of profanity and patience with fine adjustments will fix your red follower situation. Also keep the red follower clean, including the plastic under it, lube those areas with dry lube spray. I went thru the same thing initially. Once you get this going, will never understand how you went without it for so long.
Good stuff Jesse B! I need to get one of those APP presses!
It’s a handy little press.
I just got one of these, just waiting for midsouth to finally send it over. Nice video 👍
It’s very useful.
Here's a tip if you're having issues with the crab claws on the case shuttle not opening and closing properly.
The rectangle slot on the front side of the shuttle, just to the right of the spring mount,
Cut a thin strip of THIN cardboard like from a pack matches or THIN flap from a box top.
make the strip wide enuff to fit snug, fold it to length of the height of the slot.
Make 2-4 folds as needed to make it fit snug but not too tight.
Slide it in from the top, bend the single layer tail over to keep it from falling down in the slot, and cut it short enuff to not catch on the spring.
A little trial n error, and you will be amazed at how better the crab claws work.
If you take the shuttle off and work it in your hands, you'll see what this shim does.
Thanks for the info.
Cut half inch pieces of PEX plumbing pipe and put in the holes of the collator stops them from going down backwards.
Thanks for the info. I’ve done the washer trick to it and very far and few in between one will sneak by upside down. Thanks for watching.
got some asmr going on there
👍🇺🇸
I would rather clean them before putting them on the reloading bench.
That way I can just size & deprime.
Cleaning hand gun primer pockets has not been a concern of mine. Going back to when the Dillon (4) station 550 Press first appeared as a reference. It was not a concern prior to the invention of the 550z
Thanks for the comment and watch.
How do you not get case jams with that much space between the tube and the actuator? I was told it should be a coin’s thickness and no more. My actuator keeps binding up and won’t go all the way forward.
Trial and error. Thanks for watching.
Hey Jesse, have you ever had 9mm with smaller than normal flash holes ? I bought a bunch of NORMA 9mm direct a couple of years ago, and for whatever reason they seem to have smaller flash holes. I had so much trouble de-capping them with my Frankford Arsenal hand deprimer. I used to sit and watch TV and go through a bunch at a time, but when it came to these it was a no go. Good job, keep em coming with the reloading.
I've had the same problem!
Norma 9mm brass is always a pain with the smaller metric flash holes. For a while, before I collected a stash, was actually chucking them un in my lathe and drilling the flash hole to proper size-5/64". You can purchase smaller decapping pins for certain brand decapping or sizing dies.