Brooo if you would have wet sanded before you clear coated it would have been flawless. Then you should have wet sanded the clear coat and finished it with a polish would look like glassy gold instead of a fake flat gold. Gold is always gloss never flat when you get something actually platted. Just FYI for your future paints. Adhesive, primer, color coats, wet sand(recommended 1500 grit), water dish soap wash, dry, clear coats, wet sand (1500 again), water dish soap wash again, polishing compound medium grit, polishing compound fine (wax on wax off Daniel son), wipe with damp rag, wipe with dry rag. Best finish you could possibly ever get out of can paint I promise you.
Everything can be improved. I’ve done countless paints on similar items and wet sanding and polishing will give you a full on glass look not saying he did a bad job but that step alone takes the project to the next level. You can try to argue with facts but anyone that knows anything about custom paints knows that wet sanding improves your finish.
@@Devonx777 still holding up just getting a little dirty. Fired it only once after painting it. But to be honest I would go with cerakoting it if I were looking to do it again
Well done bro, I know it’s not quite as easy as you make it look! You covered all your bases and thought of pretty much everything. It came out great! I’m about to do mine, wish me luck 🤞
A few tips. You can put a chop stick or something similar into the box and then tape it for added support so you can stick the slide onto it and not have to worry about lifting it up to paint the under side of the edge. Also do not get your face that close to paints, especially metallic. You're inhaling bits of metal and that will fuck you up.
Nice, I think I’m going to have to spray my 23 too, and maybe the mag plates. Good looking video young sir, I like how you started with daylight, then made the sun go down; very artistic.
@@vongiftedtv7864 it actually went really good, but when i posted that comment☝🏽 i painted it chrome but abt a week ago i painted it this “fire fighter red” or sum like that and its nice
Think this could work with an revolver as well? I have an old revolver the barrel and cylinder are nice chrome but the body could use some work. I was debating making the body black while leaving the barrel and cylinder chrome with a nice wood grip. Just wonder how well it would do in and out of a holster.
Good tutorial. I just paint my g26 slide black with a 2k clear coat. It’s drying now. I’m nervous about pulling the paper off. Any recommendations? Is this a grip it and rip it deal or should I pull slowly? I’m probably putting too much thought into this. Lmfao
Looks great. Just one tip if you would've gave it a light sanding with 400 grit sand paper after every other coat it would've came out a lil better. Still your joint is overall 🔥
By sitting in his drawer and never leaving? Probably great! In a tactical standpoint where it hits the ground on accident. Or dropped. It will ruin the finish.
No, I didn’t. My project came out fine without that step but I’m sure it wouldn’t hurt if you did. As long as the grease, dirt, and oil is removed prior you should be good. 👌🏽
Really looks good . But when you're spraying each pass you make is one coat . So when you go back and forth you are adding a layer . I would really liked to have seen when he took the tape off . A follow up video of that would have been nice to see . But otherwise it looks good .
Ur spray paint skills aint bad, but dont squeeze paint trigger mid way or too late past start point.. smooth long movements and less is better because u can always add more after instead of ceeating more work 4 yourself.. but good job g💯
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Who would've guessed that old Microwave box would come in handy... Thanks, Tariq St. Patrick lol
😂😂
A not gonna lie it turned out clean lookin.
After 4 years, do the paint hold? Did you needed to repainted?
Brooo if you would have wet sanded before you clear coated it would have been flawless. Then you should have wet sanded the clear coat and finished it with a polish would look like glassy gold instead of a fake flat gold. Gold is always gloss never flat when you get something actually platted. Just FYI for your future paints. Adhesive, primer, color coats, wet sand(recommended 1500 grit), water dish soap wash, dry, clear coats, wet sand (1500 again), water dish soap wash again, polishing compound medium grit, polishing compound fine (wax on wax off Daniel son), wipe with damp rag, wipe with dry rag. Best finish you could possibly ever get out of can paint I promise you.
It was flawless what you talking bout
Everything can be improved. I’ve done countless paints on similar items and wet sanding and polishing will give you a full on glass look not saying he did a bad job but that step alone takes the project to the next level. You can try to argue with facts but anyone that knows anything about custom paints knows that wet sanding improves your finish.
@@motojanza5686 100
@@jontaylor8188 then you know absolutely nothing about painting
@@jontaylor8188 lmao!
Did this with my ruger 57. Made the slide metallic silver and the barrel gloss red
How's the paint holding up 6 months later?
@@Devonx777 still holding up just getting a little dirty. Fired it only once after painting it. But to be honest I would go with cerakoting it if I were looking to do it again
@@parthmistry7723what about using heat resistant paint would that be better?
This man is resourceful and smart.
Putting them in warm water. Never heard of that. I’ll have to try it
Well done bro, I know it’s not quite as easy as you make it look! You covered all your bases and thought of pretty much everything. It came out great! I’m about to do mine, wish me luck 🤞
thank you 👌🏽🙏🏽, how did your project turn out ?
A few tips. You can put a chop stick or something similar into the box and then tape it for added support so you can stick the slide onto it and not have to worry about lifting it up to paint the under side of the edge. Also do not get your face that close to paints, especially metallic. You're inhaling bits of metal and that will fuck you up.
Bout to Army Green my M&P slide and khaki the lower/tape it off so it's black as well. The gold turned out better than I was imagining it would.
Nice, I think I’m going to have to spray my 23 too, and maybe the mag plates. Good looking video young sir, I like how you started with daylight, then made the sun go down; very artistic.
just bought a 1911, might go for gold as well for it. nice video
I been doing this for a lil while just did my ruger security 9 the same gold color ✊🏾
Post it i got a security 9 and want to pai t it
I'm thinking bout painting my M16 a chalk blue color but I want to do a bad job on purpose, give it style.
Why you leave sights on?
Blackplate, extractor, spring. Scary to even think about how that's lookin
How did it hold up looked good
Can we get an update on the gun please?
That’s Fire. You should make this your side hotel bro, You’re good.
Your procedure makes . Well done young man.
very impressive bro !!!!! fireeeeeeeee
Nice view
Damn hell of a job!
thank you sir 🤝
That looks awesome bro👍
bouta do this with my 21
Does spray painting the gun makes it rusty I’m new to guns and asking
Looks great I am going to try one of my hunting guns after watching this.
Did you take out the firing pin and all in the slide bro or tape up that area
How long did it last ?
Came out pretty good
Looks really good
good job! thanks for sharring.....
Nice view bro. Good tutorial as well.
just liked and subbed was looking for a good brand for spray paint gold. all i know thats good gold was rust oleum specialty metallic gold
Fya 🔥 need this for my g27
Hey bro, i have a revolver S&W cal. 32, i should Paint at the same way?
Dope video bro and that’s a sick ass view
Thanks man
how has it been holdin up has any of it started peeling off?
ima do this with my glock 19, if i mess up ig its ok bc im bout to get a 22 or a 17
how did it go ?
@@vongiftedtv7864 it actually went really good, but when i posted that comment☝🏽 i painted it chrome but abt a week ago i painted it this “fire fighter red” or sum like that and its nice
Nice, do you have Instagram ? I want to see it. mine is @vongifted
Nice vid.
I'm with ya on it looking clean with just the grey.
I'm doing my ar red, black, and grey., All flat.
nice, that’s going to look dope. have you completed the project yet ?
@@vongiftedtv7864 not yet. I got the paint bought up, just waiting on the time to get did.
Pretty dope for diy
You inna military ? I think we was in Kuwait together 😂😂
Love the videos man🐐
Raw af
Thanks for this might give it a try
Yo u really just sprayed paint your gun lol
if yk what youre doing it turns out fine i splatter painted mine and painted the lower and it still works the exact same
Best video on RUclips for Glock slide painting
Ask friends if you can do their's that's dope as fuck, would like to see more designs and techniques
that’s a good idea 💡 thank you
I want to do this but can’t take mine off since it’s non blow back glock19 :(
Nicely done
Think this could work with an revolver as well? I have an old revolver the barrel and cylinder are nice chrome but the body could use some work. I was debating making the body black while leaving the barrel and cylinder chrome with a nice wood grip. Just wonder how well it would do in and out of a holster.
Good tutorial. I just paint my g26 slide black with a 2k clear coat. It’s drying now. I’m nervous about pulling the paper off. Any recommendations? Is this a grip it and rip it deal or should I pull slowly? I’m probably putting too much thought into this. Lmfao
better how to then any of these pro gun customizers
Looks great. Just one tip if you would've gave it a light sanding with 400 grit sand paper after every other coat it would've came out a lil better. Still your joint is overall 🔥
Thanks for info Bro
Can you post a updated video on how it’s lookin? thinking about doing this to my 43, good video b 💯
m.ruclips.net/video/9GZ0qCjkxIQ/видео.html
Good job
Thank you 🤟🏽 more projects on the way
what colour of layers should I use if my slide is blue but I want to paint it black?
Just black that’s a dumbass question
@@00packsyou use a primer first not just black
Did you use high temp spray paint?
Yes, the paint I used is in the description
Nice video young blood I'ma do my raggedy pistol first see how it turns out .
How’s it turn out
I'm thing to do this with Boomer. Not going to paint it gold. Sticking with black. Good instructions though
Helpful!!!
Tight
thank you 👌🏽💪🏽
Thinking about painting my revolver..
Nice!!! You did a good job how has the paint held so far?
By sitting in his drawer and never leaving? Probably great! In a tactical standpoint where it hits the ground on accident. Or dropped. It will ruin the finish.
WoW dude, Great Job...
that's nice
He need to do a wave tutorial his hair on point 👉💯
thank you, video coming soon. subscribe so you don’t miss it. 👌🏽
did you sand it?
No, I didn’t. My project came out fine without that step but I’m sure it wouldn’t hurt if you did. As long as the grease, dirt, and oil is removed prior you should be good. 👌🏽
Nice 🔥
Turned out pretty nice imma have to do my Taurus g2c like that ... damn that was dope
🔥🔥🔥
That gold rubs off on the hands
Looks like a stick of butter. Funny!
Really looks good . But when you're spraying each pass you make is one coat . So when you go back and forth you are adding a layer . I would really liked to have seen when he took the tape off . A follow up video of that would have been nice to see .
But otherwise it looks good .
Gl bro I need this
Tried it and now my slide is stuck. Can someone help me
Did you paint the inside of the slide ?
Good sh*t bro
Ur spray paint skills aint bad, but dont squeeze paint trigger mid way or too late past start point.. smooth long movements and less is better because u can always add more after instead of ceeating more work 4 yourself.. but good job g💯
How has the finish held up bro? I wanna do this on my glizzy if it holds up nice through time
After 1 month it’s still looking good. I’ve put over 100 rounds through it and no peeling or anything. 💯
@@vongiftedtv7864 Ight bet good looks!
m.ruclips.net/video/9GZ0qCjkxIQ/видео.html
Fire af bro Finna do mine this weekend bro 💯💯💯💯
My young brother you could make some side cash for this. If you were close to me I would hire you . God bless you.
bro where u live at shit fye
Its 75 dollars to get a slide professionally cerakoted with a somewhat warranty. Never understood the guys that spray paint a firearm.
Dis guy clearly from da hood
Are you planning on carrying that weapon in between cotton? once you holster it, that gold is gone. Paint your bike, not your gun.
the most hood tutorial I've ever seen
Scared to take ny shit apart 🥲
Bro look like Chingy's lol brother 💯
Shit i should of watched this before I fugly mine
You can remove your work with the proper steps and try again with my process.
Is every one who commented on this post 11 years old?
Bruh I’m painting the same gun on my balcony the same colors rockin the same fuckin shoes can’t make this up
Bro I’m so happy rn, my dude starts his spray off the part. I see so many people spray directly on it and it angers me 😂😂😂
Won't it just smell like spray paint
no
My dumb ah painted da inside of da slide🤦🏾♂️
Damn lol ok it’s all good. Just get some acetone (Finger nail polish remover) from local store. It’ll come right off. 👌use q-tips for tight areas
Nice but get them plastic sights of your gun.
I do need to upgrade huh, I’ll keep it in mind. 👌🏽
😂😂
Oh my god please stop
🤣😂🤣😂😂😂😂😂😂😂
That is not it partner. Respect for trying tho