I managed to get an average of 650 on my ks0 ultra, I just removed the side covers and added a 3d cover for the high speed ac muffin fan, I use the 230w power supply, I don't know how much it consumes right now. The parameters they managed to push are 230mghz and 170mv. My maximum temperatures are 105 on the card and 62 on the chipsets, in 3 days I will change the pads, thermal paste and add aluminum heatsinks, I didn't get any copper ones, we'll see what happens. Greetings from Mexico
All i did so far was put a 120 mm fan i had lying around from a old miner years ago, and i put 2 ps1 disk cases under the edges to get airflow, and my rashrate went up by a significant amount, it is also running about 35 to 50 degrees Celsius depending on how hot the room is, compared to the original 80 degree before i installed the fan
I did one of my three ultras yesterday got it back together I have not put any upgraded firmware on it yet but it was easy to take apart and put back together and I don't know why but my standoffs stayed in the machine when taking the screws out there was no thread lock around there apparently
the new pbfarmer firmwares have both a target chip temp and a target board temp on the fan config module. if the sweet spot on the chips is 80 degrees, what should I use as the board sweet spot? thanks
@@Blacky-u2p it’s not about efficiency. Running it stock and undervolting is the most efficient. Yes but at the time would have been $800-$1000 for that instead of $150 in parts and a single miner. Now with miners at the $129 mark, definitely cheaper just buy miners. There is also fun in overclocking and pushing things to the limit. Why do people tune cars if it’s less efficient on gas? For the fun and more power just because.
@@LukewarmMiner i´m Elektroniker if u put 3 miners at 330w 20v psu so u consume 110w/miner? and put 3 usb fans on it by using 2 5er Wargos?!? ad run Over Clock Settings
I managed to get an average of 650 on my ks0 ultra, I just removed the side covers and added a 3d cover for the high speed ac muffin fan, I use the 230w power supply, I don't know how much it consumes right now. The parameters they managed to push are 230mghz and 170mv. My maximum temperatures are 105 on the card and 62 on the chipsets, in 3 days I will change the pads, thermal paste and add aluminum heatsinks, I didn't get any copper ones, we'll see what happens.
Greetings from Mexico
Thanks for the going over the features of the updated version of the software.
All i did so far was put a 120 mm fan i had lying around from a old miner years ago, and i put 2 ps1 disk cases under the edges to get airflow, and my rashrate went up by a significant amount, it is also running about 35 to 50 degrees Celsius depending on how hot the room is, compared to the original 80 degree before i installed the fan
Great video as always! 2 shrouds to 2 people would be my vote.👍
I did one of my three ultras yesterday got it back together I have not put any upgraded firmware on it yet but it was easy to take apart and put back together and I don't know why but my standoffs stayed in the machine when taking the screws out there was no thread lock around there apparently
the new pbfarmer firmwares have both a target chip temp and a target board temp on the fan config module. if the sweet spot on the chips is 80 degrees, what should I use as the board sweet spot? thanks
@@ccplz7137 board I have to 100c, chip 80c
awesome,, time to squeeze my 180w $13 brick
I like it
Newbie here, I still confused about fee payment. Can anyone explain it (setting payment, etc) when I plan to use this firmware? thank You
@@trogalko the fee automatically comes out, a percentage of shares generated gets sent over to pbfarmers stratum on herominer.
so it have 700 gh/s?
@@Blacky-u2p it’s possible, we have people in the 800-1TH range currently. My 330w psu was giving up the ghost so im at 630 @188w right now
@@LukewarmMiner 2x400gh/s at 100w
you have 630 at 188w so its not so efficent
@@Blacky-u2p it’s not about efficiency. Running it stock and undervolting is the most efficient. Yes but at the time would have been $800-$1000 for that instead of $150 in parts and a single miner. Now with miners at the $129 mark, definitely cheaper just buy miners. There is also fun in overclocking and pushing things to the limit. Why do people tune cars if it’s less efficient on gas? For the fun and more power just because.
@@LukewarmMiner i´m Elektroniker
if u put 3 miners at 330w 20v psu so u consume 110w/miner? and put 3 usb fans on it by using 2 5er Wargos?!?
ad run Over Clock Settings