@@LukewarmMiner Thanks! I was going to run that until the bigger PSU, heat sinks etc arrived. I'll just wait then. How is the 562 working out for you? Watts to hash. Worth the upgrade?
Could you maybe Go over that a bit more in depth. You confused me with that too. Upload revert, but not really flashing it??? Rather hit cancel, and without flashing the revert, do the factory reset??? 😳
Sorry I am still hestitant, but that is really how you do it??? 😮 Does it have negatives doing the full process with the revert file, and when done, do the factory reset? Thx for your assistance.
After uploading the init file, and then the firmware, do i need to then re install the init file to try other firmwares? Or do i just do the init file for the first time and i can upload all of the other firmwares after?
I did all update int file then overclock file I start by 505 L but the red color is blinking and not start mining. I did every thing I change the pool and after some time it give Tbc error I don’t know what I did but I revert and it’s working on stock now any help for me ?
Are your fans plugged in still? If no, plug them in If yes, move to 505 no lettering If you still cannot get it to overclock, use the revert file, upload it, confirm but do not restart. Click “factory reset” and confirm should go back to factory.
Fan is plugged in and I already revet it and it’s working no problem in stock But that. Mean I can’t overclock ? Or there is some batch from ultra can’t be overclock?
It’s working now the weird. Thing I was mount the internal fan out side like more they advice by that when I return it back it’s working and I can overclock. I am mining now on 618 gb I don’t have fan shroud I plan to print one. Then I will try 678 because the temp coming 88 cil without shroud. Thanks for your replay before
The hobbyist miner sure f'ed up his ultra. Also I use asus rog strix 330w laptop psu from aliex for 45 bucks shipped. You'll need to solder a new barrel plug on it... Which works out ok as you can put a new heavy duty barrel plug on it. I am soon going to change the connector to something beefier.
@@LukewarmMiner I wonder if those are the ones that I ordered I ordered a bunch of different heat sinks and I looked for the blue ones I found some apparently they are 3D printed aluminum
thanks for this. just got my first ultra yesterday. (yeah I know....) lol
Thanks for the video. Gonna try it later today hopefully I don’t brick it
Full speed good man! Full speed! You thought me how to OC my other miners.
On the 505 version. Is a upgraded power supply needed or will the stock one work?
@@TheCasualGamer01 I would reccomend it, as I saw 140w getting pulled. It’s a 100w psu from factory
@@LukewarmMiner Thanks! I was going to run that until the bigger PSU, heat sinks etc arrived. I'll just wait then. How is the 562 working out for you? Watts to hash. Worth the upgrade?
At the end you said cancel out before factory reset, I'm confused
@@mozzarella84 so when you upload the file it will ask to restart hit cancel
Could you maybe Go over that a bit more in depth. You confused me with that too.
Upload revert, but not really flashing it??? Rather hit cancel, and without flashing the revert, do the factory reset??? 😳
Sorry I am still hestitant, but that is really how you do it??? 😮
Does it have negatives doing the full process with the revert file, and when done, do the factory reset?
Thx for your assistance.
After uploading the init file, and then the firmware, do i need to then re install the init file to try other firmwares? Or do i just do the init file for the first time and i can upload all of the other firmwares after?
@@ImKronzr no not at all just next one you want to try
@@LukewarmMiner thanks !
how mine bugna sir for the same with sedra node?
@@murdiyana-g9m yes should be no difference
I did all update int file then overclock file I start by 505 L but the red color is blinking and not start mining. I did every thing I change the pool and after some time it give Tbc error
I don’t know what I did but I revert and it’s working on stock now any help for me ?
Are your fans plugged in still?
If no, plug them in
If yes, move to 505 no lettering
If you still cannot get it to overclock, use the revert file, upload it, confirm but do not restart.
Click “factory reset” and confirm should go back to factory.
Fan is plugged in and I already revet it and it’s working no problem in stock
But that. Mean I can’t overclock ? Or there is some batch from ultra can’t be overclock?
It’s working now the weird. Thing I was mount the internal fan out side like more they advice by that when I return it back it’s working and I can overclock. I am mining now on 618 gb I don’t have fan shroud I plan to print one. Then I will try 678 because the temp coming 88 cil without shroud.
Thanks for your replay before
The hobbyist miner sure f'ed up his ultra. Also I use asus rog strix 330w laptop psu from aliex for 45 bucks shipped. You'll need to solder a new barrel plug on it... Which works out ok as you can put a new heavy duty barrel plug on it. I am soon going to change the connector to something beefier.
@@RainBitcoins thats crazy! 330w at 19v?? would either solder on a new barrel or at that point maybe hardwire the miner or use bullet connectors
Where did you get the heat sinks you have on
@@trailerminer9650 amazon, they are just alphacool ones
@@LukewarmMiner I wonder if those are the ones that I ordered I ordered a bunch of different heat sinks and I looked for the blue ones I found some apparently they are 3D printed aluminum