First, I would apply the grease in any ring/o-ring before installing it, and also the manual states to use 1ml of oil in the can and then 1ml after installing the air can assembly. Just my 2 cents.
@@d.biketech1788 The thicker glide ring goes on on top of the air piston seal, as shown in this video. Although it's confusing because the shock is upside down. ruclips.net/video/ngdHH8Q2Zs4/видео.html
congratulations for the video, You have a table with the pressures of the Rock shox rear suspension 40 MM Dabon air. She is in a spark Rc 2021 , Vertical position. Thanks
you literally oriented the larger oreo seals and spacers opposite of what it was when you opened it. they have an orientation and taper for a reason lol
You skipped steps compared to the rockshox guide. If i follow this to a tee, Id miss out on replacing multiple seals that are included in the service kit. Appreciate the effort but it only left me confused.
Well, my mechanic said, need a 50 hrs service kit, I assumed its also apply to all. Not included the labor fee, the days for the mechanic to do it since a lot of bikes in the line were came first. I was thinking to go back to hardtail. Hays
removing aircan that way could be dangerous! Worth a rag through eyelet. not right for all SD. Important to note the orientation of the 2 air piston glide rings, thick and thin.
Hi just curious why you have to take out the mounting hardware? Is it possible to do the service without removing as I haven’t got a vice or anything to use.
You can push the mounting hardware out fairly easy sometimes with just your fingers, but also a large pair of channel locks will work you can get a pair for 20 or 30$ at any hardware store.
First, I would apply the grease in any ring/o-ring before installing it, and also the manual states to use 1ml of oil in the can and then 1ml after installing the air can assembly. Just my 2 cents.
Amazing video! Top notch job! My first rebuild and it went super smooth thanks to you!
Thanks! Glad it went smoothly
Awesome video, super straightforward. Extremely helpful.
Hello, you put the glide ring inverted, thethin is in the place of the big one. Good job!!
Nope
@@d.biketech1788 is not a critic, my English is not so good, is only a mistake. if you check the manual or other Shox you see.
@@d.biketech1788 The thicker glide ring goes on on top of the air piston seal, as shown in this video. Although it's confusing because the shock is upside down. ruclips.net/video/ngdHH8Q2Zs4/видео.html
congratulations for the video, You have a table with the pressures of the Rock shox rear suspension 40 MM Dabon air. She is in a spark Rc 2021 , Vertical position. Thanks
Short und Quickly. Great.
Hi
Do you have to adjust the rebound settings before taking apart ?
Thanks
No
Can you clean the body and damper shaft with brake cleaner or what should you use
you literally oriented the larger oreo seals and spacers opposite of what it was when you opened it. they have an orientation and taper for a reason lol
what spray were you using to clean it?
Hi, can you use SRAM butter instead of dynamic grease?
Thanks
It's a little thin, there's way more friction in a shock so it needs grease that can deal with it
@@d.biketech1788 Thanks for the reply.
do you have a link where to buy the kit?
You skipped steps compared to the rockshox guide. If i follow this to a tee, Id miss out on replacing multiple seals that are included in the service kit. Appreciate the effort but it only left me confused.
What steps?
I followed this video and didn’t have any seals left over
50 hours service ? And already replacing seals ? Or is just marketing or it simply gets damaged to quickly because 50 hours is way to soon for my POV
just marketing, no need to replace seals. just clean them up and put grease on them and you're good to go.
@@gaspertolar7950 I did that but still has a leak!
Well, my mechanic said, need a 50 hrs service kit, I assumed its also apply to all. Not included the labor fee, the days for the mechanic to do it since a lot of bikes in the line were came first. I was thinking to go back to hardtail. Hays
This shox doesnt have compresion adjust knob?
Hi, did you just buy the Counter Measure spring and add it to the Select Plus shock?
Nope it was in the shock from new
removing aircan that way could be dangerous! Worth a rag through eyelet.
not right for all SD.
Important to note the orientation of the 2 air piston glide rings, thick and thin.
Hello, could you send me the link to this service kit? thank you
Hi just curious why you have to take out the mounting hardware? Is it possible to do the service without removing as I haven’t got a vice or anything to use.
Because the can will not fit over the lower hardware
You can push the mounting hardware out fairly easy sometimes with just your fingers, but also a large pair of channel locks will work you can get a pair for 20 or 30$ at any hardware store.
Leave the shock mounted to the bike frame if no vice available
Are all the service kits for the super deluxe ultimate basically universal? or are they shock specific?
Nothing easy or simple about this 😂 i could rebuild an engine easier