Это видео недоступно.
Сожалеем об этом.
Arcade Jamma Harness Explanation 2018 Edition
HTML-код
- Опубликовано: 14 авг 2024
- These sites are great for finding out about certain people you may not want to deal with in the arcade hobby.
KLOV Feedback
forums.arcade-m...
CoinOpSpace Forum
www.coinopspace...
Intro song "Pentagram"
Free Production Music by Jason Shaw
music by audionautix.com
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.
Exactly the level I was looking for. Thanks for putting this together.
even im not a good eng-speaker but i understood & i loved ur video a lot thanks man u have a nu subscriber
I put a multi Williams in my old stargate and it works great. I was wondering about VGA mode .The directions say"Ensure the VGA enable is OFF when used in an original cabinet !" I think what they mean is VGA is off when RGBVHG wires are connected to a CRT, or when VGA jumper is enabled a CRT is not connected but all the buttons and coin door original cabinet is ok to use ? also do you know what code they use to upload files on the j rom jammers ?
Great vid, working with a jamma cab now love the info
Glad the video could help
Where can I find a quality JAMMA harness which has wiring thick enough to handle an old-school PCB?
I've heard that the cheap $10 harnesses cannot handle the power supply of an old PCB.
i'm just beginner this help me cant wait till next one thank you
Can you please show how to hook up a speaker to the jamma harness? i am getting a 60-in1 mini cocktail machine that jamma board has a 3.5mm jack for audio, but i am replacing it with an ArcadeSD Jamma board which does not have that option. If you could please show what wires on the Jamma go to a speaker and how to wire it that would be so helpful! Thank You!
My harness is wrecked don't know the colors betewn the harness can u help please and thanku
What bout kick harness for supergun I have retroekeklctronik supergun
Thanks for making this video. It's very useful.
I don't understand so a jamma harness won't work with a neo geo??? How do I play and power it???
I have a question. I’m looking to buy Tekken 7 Fated Retribution pcb (JVS). What all do I need to hook it up to a Chewlix. (Chamma)
Is it even possible to do?
@@XxWOLFERxX no its not possible. JVS is completely different. Although I never used that Tekken 7 hardware. ...I have to imagine you would still need an I/O board for starters.
@@moomert1 ok. I have decided against to purchase it. For one, it’s too much money to take a gamble on trying to get it to work. Two, those pcbs and Taito type x2 motherboards are for single players only. Right? I have two player panel. I was going into it thinking I can play two players with one unit.
Where does that other white cord go off the jamma harness? Not the monitor one? I need to know how to hook speakers up
Hooking up sound all depends on the type of PCB you are using. However, if you get a jamma harness with labels on it, as seen in the video, it will tell you exactly what wires to use.
@@moomert1 i have a mk4 pcb and a ki2 pcb
This is 1982 break out sir how do if Mach the colors don't go to same color can u help
The color of the wire really does not mean anything. Its just a coating. Its the location of the wire that matters.
Great video! I do have a question though. Have you ever seen a jamma harness with the component side on a harness and a solder on another separate harness? I have a Midway cab. With that setup. Thanks
never heard of anything like that.
@@moomert1 First of all i am new to the arcade hobby and i love it! Second your video's are great! Easy to follow and very informative! Keep up the great work! Third and final the two jamma harnesses i had in my cabinet is solved. It was a Konami cabinet with a Konami harness wired to the cabinet, but the previous owner for whatever reason threw an midway jamma harness into the bottom of the cabinet and the two harness wires were intertwined. Thanks for the informative videos. They really help us newbies
Please upload the 20 pin jamma wiring connection video for family version console
Is there a max recommended length for the JAMMA harness? I've been wanting to put an extension in my cab, by using a JAMMA fingerboard in between, but I'm worried about loss of voltage and such. I'd try and measure it but if you have any input, it would save me some trouble. Thanks!
I have made custom cabs thtbuse a standard jamma harness and a jamma extension harness. A "normal" gamer will not notice any real difference.
@@moomert1 I'm mostly concerned about the health of the boards, with voltage drops and what not due to length, but I guess it's easy enough to make the extension and just measure well. Thanks.
Clear as crystal! Awesome video 😉
And what about House of the dead 1 which have peripherals like the guns?
HoD is not jamma. That game runs on Sega Model 1 hardware.
@@moomert1 theoretically it's on model 2 but I don't know exactly if that's right
I have that same jamma so when you use it for a game like street fighter you don’t plug in the 4-6 buttons and just use the kick harness instead go plug them in correct?
That is correct
Awesome video thank you
Great tutorial on JAMMA. Just last week I picked up my first working arcade machine its a Carnival king. I got thinking would it be possible to get some kind of a JAMMA switcher to switch between Carnival King and a 60 in 1 board or Pandoras box? The monitor is 38" Digonal and thats pretty much all I know about it. If there is such a switcher would there be a problem with resolution switching from one game to another? Thanks.
So your cab is a shooting game ?
@@moomert1 Sorry for the late reply. Yeah Carnival king is a gun game, however If I could figure out how to get a multi game working with the monitor, I would make mods to the control panel and add Joysticks and buttons.
Is there a certain way to install the joystick on the cpo? Is there an up on the joystick or is it just whichever way it's installed? Do you install the up on the bottom switch? The left on the right ... ?
Assuming we are talking about "America" style joysticks with cherry switches, there is no right or wrong way. When wiring up the joysticks, the "UP" wire goes on the lower switch. The "Down" wire goes on the Upper switch. The "Left" wire goes on the right and the "Right" wire goes on the left.
@@moomert1 thank you! That's what I was thinking but just wanted to be sure! Thanks for the quick reply!!
On another note/ question, I'm going to using a 19" 4x3 monitor with my 412 elf game board set up. In a vertical display. Do I set the monitor up in the cabinet turned 90° ( sideways) ? Do the games play on the monitor sideways from how a normal monitor sits?
Thanks , Mike
@@wilturner29 i have never used a game elf. However, on pandora box carts, games which normally would play vertical....and normally would require a monitor to be turned.....now on the pandora, the games do not require the monitor be turned. However the image will be smaller.
Hello moomert I have a question I got a hdmi converter for my marvel vs capcom arcade but i don’t know how to install it maybe can you make a video on how to install a converter to an arcade machine ????
You will probably need a cga to VGA converter....then a VGA to hdmi with an upscaler
Question....the us buttons have 3 connectors. What is the third one used for as the cables only have 2? Just curious.
The third prong keeps the connection closed, where as the non ground prong keeps it open. When the button is pushed, the connection is closed, thus activating the action taking place on screen.
@@moomert1 I see. Thanks for the reply.
Big question do you know how to connect to the tv???
You don't. An arcade jamma harness connects to an arcade monitor. Not a tv.
@@moomert1 Interesting I do see a lot of people who uses an arcade jamma on home TVs on RUclips. Not the modern TVs today. But they do not explain how they hook it up on the tv.
@@lorenzotrinidad384 they are using either a Supergun.. or they are using an adapter.
@@lorenzotrinidad384 check out my video here. It may help you
ruclips.net/video/vJ4s7-MVhEk/видео.html
Hey moomert1 I thought there was a way to wire a 6 buttons config to a normal harness but there was some trick with wires 27-28 ground wires. Any advice for that?
Any 6 button game gets buttons 4, 5, and 6 from a kick harness which is hooked up directly to the pcb board . Signal comes from the connection spot and not from the jamma harness. Yiu ate thinking of Chinese Jamma which will not work. Chinese jamma just butchers the harness
moomert1 according to some sites though if you snip one of the ground wires it’ll work. It mentions this loosely in the manual. Any thoughts? The jamma harness does have 6 buttons wired on it?
@@ChryslerKev listen to what the guy said.... All extra buttons come from the game board. Ffs
I have a Jamma harness 6 button prewired. Can I use this with my original Sf2 CE pcb without kickharness?
Nope you need a kick harness
@@moomert1 so those last 3 positions on my harness have no use?
Where do I start and end my grond daisy chain?
@@bjorn3977 sounds like your harness is Chinese jamma. Regular jamma, those last 3 are usually for ground.
With a pandora it's fine.
Hi, great video. Thank you. I have two questions please. 1) Can you swap existing buttons in a Jamma cabinet to LED buttons? Will it power the light up or is something extra needed for the power? 2) I want to swap out my existing buttons and joystick with an X-Arcade dual joystick. Can I swap the connections over and just connect three buttons per player? Thanks in advance.
1. Yes you can swap buttons. I have never used light up buttons but I'm thinking you would need to draw additional power from your power supply.
2. Take out the old joystick and buttons, install the new ones, and add the wires.
Do you have a link for this jamma harness and wiring? I think I need a new one for my Sega Blast city. It seems to habe some hack? I could send you some pics if you wanted my email. Thanks for the video.
Try the website Jamma Nation X. They sell the best quality harnesses in my opinion.
@@moomert1 my man
hi there mate! you know when said street fighter 30 anniversary version online version is it a pcb or cd ?
Neither. Its downloadable software.
@@moomert1 can i use it for commercial use in a shop?
@@aceboogie1775 as in charge people to play it. If you are in USA, legally....no you can not.
its compatible use a pandora box arcade edition with arcade cabinet/?
You need to have a jnx adaptor.
Pandora 6 (3A) are in Chamma..a Chinese jamma.
So just use a jnx adaptor with kick harness (you cab also have a voltmeter is better) to use a 2x6 buttons.
ruclips.net/video/Lm28ziqIpBA/видео.html
But carrefully choose the Pandora..a lot are 'copy od copy',some have a jamma but with vga only..
I use the pink one,you can select 15 khz..31 khz..and have new games easily.
The best plug n play option.
Or the pi2jamma..rasp.jamma adaptor...hyperspin..
@@Sam-Lawry thanks
Jamma standard as showed in this vid has been dead since early 2000. It's all JVS now for the new stuff. Even the JVS to Jamma converters ( capcom i/o, etc) have been abandoned. All cabs now use dvi or vga to a hd monitor no more crt
But of course this vid is relevant to the old school jamma pcb
My harness is wrecked don't know the colors betewn the harness can u help please and thanku