Welcome to howENGINEERSdoit!, I hope you enjoyed the video. Please do like, comment, share and subscribe the videos which will motivate me to create more videos for all of you.
Thank you very much Mr. Mohamed Shakeel for this useful video tutorial ! There was very simple explained how to draw real thread in CATIA V5. Thank you one more time for this interesting drawing method ! :)
Thank you so much for this video, was a great help. I realized you can also do it the other way round. create the screw with the core diameter and then use a fin command in combination with the helix command. :)
Hai dear sir my self vinodh i am a beginner and i learned catia v5 in one institute but the is not enough . when i searching catia videos i found your video with complete explanation & i was downloaded all videos . so my request is please post the video step by step from starting what are the parameters have to follow. what are the setting has to be do . that will helps all beginners thanks & bestregards vinodhkumar
assalamualaikum sir, i am new to catia and m sorry if the question is supid. But the thing is, i hav seen an option named "Thread & Tap" and want to know weather it is there for creating thread or is it something else? If it is a faster option than the one you mentioned here, please do tell me how to use it.
I am getting an error that the center curve doesn't lie on the reference surface even though I have placed the point for the helix the same distance from the axis as the radius. Any suggestions on what I can do to fix this? Thank you for the video! Very helpful !
Hi M.Shakeel, your videos are a great help for the beginners, I recently Downloaded and started practicing Catia V5, I was practicing that "Threaded Hex Screw" video of yours, i am having some problems and i am not sure if i am not doing it the right way or is it that Catia application that i downloaded, like when i was done with the first ractangle's padding and wanted to make a circle on the lower face the circle was'nt appearing within the ractangle, i had to make a bigger circle the changed the diameter, same problem with the second circle, which is internally tangent to the ractangle, after that when i gave the revolve command in the dialoge box appeared i could not mention the revolution axis, which was z axis, it was not just changing, may be be its some problem with that application, Please any help will be highly appreciated.
while making the axis (4:11) try to make the axis line in bluish colour..ie, try to make it aligned.. i got stuck there.. and one simple tip to do it easier. Put the playback speed as 0.5.. :P
good practice! I would like to know how you have the sketch features in front of y ?It is hard too making a gear without these in front of y!Also does anyone know why the commands cant work?I have catiavr21
Catia V5 Tutorial|How to Create Threaded Hex Screw(Easy Steps for Beginners)-Subscriber Requested At this point I didn't understand. When I'm projecting the circle and drawing a line, that line is flying in the sky with out even touching to the circle. Please explain that one
What elaborated use do you need..??, please go to my channel and search for extrapolate command inorder to find more tutorials on extrapolate option..!!
Quite good and helpful video. however, when i try to create a nut profile by taking the line at 30degree as you said and use the Groove command it leaves behind only the portion of the head which is to be cut. rest of the screw is gone. Why is it happening so ?
i have done everything same as u did in video.but at slotting i got a boolean error saying that it cannot be cut until it is constrained,split etc.wat to do? plsss help me mohammed shakeel
When i project the circle as shown in video it make a line outside of the hexagon not inside it , due to which it does not take point on the hexagon for plane cutting line . Help Please Sir
i am getting aproblem while using slot defination.after clicking for reference plane and selecting the circular pad.it is showing an error called feature defination error.it is showing that" the selected sketch contains points defined as standard geometrical elements.you must convert these points into constructional elements"
Please follow the videos once again. If you have any unnecessary points in the sketch, select them and make them construction geometry. Hope that helps..!!
You need to make use of the tutorials that are available in my channel. My students have made rockets and airplanes and Lamborghini's using just my tutorials, I am sure if you practice you can do it..!! Cheers.
woah, slow down speed racer. you said this was for beginners. Where's the slow motion button... I'm stuck on the angle for the chamfer on the top of the bolt. It's only letting me change the length of the line I don't see how to set the angle.
Mugesh Kumar Hi Friend, You can create whatever profile you want at the yz plane. Make sure that you give the reference surface while performing rib. This tutorial is intended to give the users an idea How to give such revolved cut outs around a cylindrical part body wrt a sketch profile. Have a nice day..!!
Why should I create a bolt, where it's exists in the standard libraries, and I can simply insert it into the assembly???? This is first time I watch Catia tutorials, in my opinion for an industrial & Mechanical designs it's so primitive comparing with Autodesk Inventor for example ...
please make this tutorial precisely... we can not understand, where did u mark for the point for revolve. i getting fail to revolve it... please tell this step... (begin from constraint )
You can revolve by drawing an axis sketch or selecting an axis from axis system or any other similar ways. Please understand the concept and try to implement it.
![Tee Grizzley - Robbery 8 [Official Video]](http://i.ytimg.com/vi/34_vkNV6wrU/mqdefault.jpg)
Clear audio + slow clicks helped a lot. Thank you!
Needed this for school. Worked flawlesly. Thanks mate
durges kumar Pandey
It is not possible to upload all videos in Hindi. I am sorry. Please note that English is a common communication language.
dhanaraj6
bro i just started practicing you are my support both morally and over here! thank you for your work ! you are awesome!
Thank you very much Mr. Mohamed Shakeel for this useful video tutorial ! There was very simple explained how to draw real thread in CATIA V5. Thank you one more time for this interesting drawing method ! :)
for hex bolt top you can use groove command itself. the power input revolve command takes more time.
Gud mrng sir i have seen all videos of your sheet metal class
I'm very happy for that i learned more from tht
thanks a lot bro.. i was struggling a lot without tree... even my guide dt know this... it was very usefull thank u...
the way ur going fast u will soon beat usian bolt
You can slow down the video under settings.
Thank you so much for this video, was a great help. I realized you can also do it the other way round. create the screw with the core diameter and then use a fin command in combination with the helix command. :)
Awesome vid. Speed of the instruction is fine if you're familiar with the tools used the video. Easy peasy. keep it up.
i am a beginner and its very useful sir....thnk u
thanks!i like it! i am a new user of CATIA!
Thanks very helpful 😊
You explain nicely it's just that the watermark in the middle is irritating.
Hai dear sir
my self vinodh i am a beginner and i learned catia v5 in one institute but the is not enough . when i searching catia videos i found your video with complete explanation & i was downloaded all videos . so my request is please post the video step by step from starting what are the parameters have to follow. what are the setting has to be do . that will helps all beginners
thanks & bestregards
vinodhkumar
Thank you sir,
I learn a lot from your videos, requested to upload few parametric modeling videos or if already uploaded pl. share it
You are awesome! Keep it up!
assalamualaikum sir, i am new to catia and m sorry if the question is supid. But the thing is, i hav seen an option named "Thread & Tap" and want to know weather it is there for creating thread or is it something else? If it is a faster option than the one you mentioned here, please do tell me how to use it.
this is easy and learnable for me now thank u sensei
thank you ! happy a nice day~
You are welcome..!!..:)
thank you friend, very good your video
I am getting an error that the center curve doesn't lie on the reference surface even though I have placed the point for the helix the same distance from the axis as the radius. Any suggestions on what I can do to fix this? Thank you for the video! Very helpful !
Only one suggestion, Repeat. Sometimes you just have to repeat to get things right..!!
Let me know If it didnt work..!!
Great video but you go really really fast. Kept having to pause. Could you slow it down a bit? Thanks man! Keep the vids coming
good video...good information
Great video thanks!
thanks for the tutorial ..!!
can you upload any complicated design which is used in industries.this video is useful
Thank you
Nice explain ..tq bro ..
Amazing tutorials :D
Thanks for video!!! But please be sure that user-especially beginner-should match your speed.
very nice tutorials, :)
Hi M.Shakeel, your videos are a great help for the beginners, I recently Downloaded and started practicing Catia V5, I was practicing that "Threaded Hex Screw" video of yours, i am having some problems and i am not sure if i am not doing it the right way or is it that Catia application that i downloaded, like when i was done with the first ractangle's padding and wanted to make a circle on the lower face the circle was'nt appearing within the ractangle, i had to make a bigger circle the changed the diameter, same problem with the second circle, which is internally tangent to the ractangle, after that when i gave the revolve command in the dialoge box appeared i could not mention the revolution axis, which was z axis, it was not just changing, may be be its some problem with that application, Please any help will be highly appreciated.
while making the axis (4:11) try to make the axis line in bluish colour..ie, try to make it aligned.. i got stuck there.. and one simple tip to do it easier.
Put the playback speed as 0.5.. :P
Hi Shakeel, My name is Md Rafiqul Islam. it is helpful video. Would you please upload tool design such as fixture, jig etc in catia v5
good practice! I would like to know how you have the sketch features in front of y ?It is hard too making a gear without these in front of y!Also does anyone know why the commands cant work?I have catiavr21
Try these videos:
ruclips.net/video/nEoZM4HVXLE/видео.html
ruclips.net/video/1A5Z8YGgqYs/видео.html
hey im rajashree.. will you please add a video of designing a car model with designing a single part of it as welll as allover assembly.
ขอบคุนมากมากเลยคับ
sir you are awesome at work but it goes little bit fast
if you don't feel then ignore no problem
very helpful
nice tutorial..btw how did you conveniently bring up in-context menus to add constraints after 4:13...thanks in advance!
once you are on the dimension option, just right click inorder to view available sub option for instant constraining..!!
thanks a lot for this nice video..
kemah demo li
Nice work :)
Very fast explain. So please slowly explaine and work..... Informative video
Catia V5 Tutorial|How to Create Threaded Hex Screw(Easy Steps for Beginners)-Subscriber Requested
At this point I didn't understand. When I'm projecting the circle and drawing a line, that line is flying in the sky with out even touching to the circle. Please explain that one
hey thank u for this video ..... can u please show the elaberated use of extrapolate option on surface work bench
What elaborated use do you need..??, please go to my channel and search for extrapolate command inorder to find more tutorials on extrapolate option..!!
Wheres can i find the helix column manually? Without that shortcut bar
thank you sir.
I have Q i am doing produuction engineering. Can i do job in designing after my engineering.
Quite good and helpful video.
however, when i try to create a nut profile by taking the line at 30degree as you said and use the Groove command it leaves behind only the portion of the head which is to be cut. rest of the screw is gone.
Why is it happening so ?
vivek Inder you need to click on the arrow pointing downwards while using groove
i have done everything same as u did in video.but at slotting i got a boolean error saying that it cannot be cut until it is constrained,split etc.wat to do? plsss help me mohammed shakeel
+Mohammed Shakeel i have the same probleme and i don't know how to solve
if any body know a solution.
pleaze help us
thanks a lot bro :) (y)
It would be very helpful if you go a bit slow sir..
RUclips offers you an option to select playback speed
Agreed
awesome
What is the command you have typed in for helix
Ur going soooo fast
Hi sir...goodmorning
I have a question ?
Can we create exploded view animation in catia v5 r20...?
Why do you use constraint everytime where as you can directly enter value
can u explain how to make ramsbottom safety valve
why you don't use "thread/tap"?
What is the procedure in doing one complete desgin in Specification tree.
Muito Bom!!!!!!!!!!!
When i project the circle as shown in video it make a line outside of the hexagon not inside it , due to which it does not take point on the hexagon for plane cutting line .
Help Please Sir
while constructing a reference lie for revolving. i am not able to get the reference line in the correct plane for revolving. i need some help
can we use shaft instead of revolve?
sir can i contact with you for more clarification regarding the assembly and part design
Why when I select the helix command the part disappears? I simple can't do this without the part. Please help me!
How did u bring helix comand in part design
i am getting aproblem while using slot defination.after clicking for reference plane and selecting the circular pad.it is showing an error called feature defination error.it is showing that" the selected sketch contains points defined as standard geometrical elements.you must convert these points into constructional elements"
Please follow the videos once again. If you have any unnecessary points in the sketch, select them and make them construction geometry.
Hope that helps..!!
sir can u plz explain how to design a helcal gear and worm
plz i need it for my project work so waiting for ur videos
You need to make use of the tutorials that are available in my channel. My students have made rockets and airplanes and Lamborghini's using just my tutorials, I am sure if you practice you can do it..!!
Cheers.
tnx man
Master cam ka koi video bana o v9
I am a beginer.How do i create a metric 12 threaded screw?what is the pitch for the thread?
You can refer to this video:
Catia V5 Tutorial|How to Create Threaded Hex Scre…: ruclips.net/video/G1-Y4R34wwk/видео.html
any easy way to get chamfer at edges.If any please let me know
what tools you choose unclear
for a video that says for beginners, you click around way too fast
i was thinking the same thing... I have too many questions
it would be very helpful if you go a bit slow sir.
woah, slow down speed racer. you said this was for beginners. Where's the slow motion button... I'm stuck on the angle for the chamfer on the top of the bolt. It's only letting me change the length of the line I don't see how to set the angle.
Sir please post what are the tools in the CATIA and how to download it
hi thanks for dis
sir how to make drill tool on catia
Bro, put sweep operation
NICE USING SHORT-CUTES
sir wt u typed to get the chamfer ,it is not clear
What about the profile sketch for Metric Threads
Mugesh Kumar
Hi Friend,
You can create whatever profile you want at the yz plane. Make sure that you give the reference surface while performing rib.
This tutorial is intended to give the users an idea How to give such revolved cut outs around a cylindrical part body wrt a sketch profile.
Have a nice day..!!
mrc
dear sir plz. upload all catia tutorial in hindi thanks
CAN U HELP ME TO MAKE MODEL OF A CAR DISC BRAKE, PLEASE??
what commend for threads
Niiice i have an exam soon and im just sooooo stupid when it comes to Catia :'(
Soukaina Belasri baby you are so cute..... where are you from?
I did but its not showing split option
How to get Octogan
sir actually I need ur help in one design
Why should I create a bolt, where it's exists in the standard libraries, and I can simply insert it into the assembly????
This is first time I watch Catia tutorials, in my opinion for an industrial & Mechanical designs it's so primitive comparing with Autodesk Inventor for example ...
i keep getting an error either boolean operation and feature definition error. someone have any idea to solve this?
how to define Arc length in Catia
sir how to cut groov on shear
what is the step on 0:38 sec how can you change the full length to 6. kindly rply
it's not hard just constraint one side to 6 and everything shall become so..
Helix command not found
please make this tutorial precisely... we can not understand, where did u mark for the point for revolve.
i getting fail to revolve it... please tell this step... (begin from constraint )
You can revolve by drawing an axis sketch or selecting an axis from axis system or any other similar ways. Please understand the concept and try to implement it.
the video is not clear and you also searching which option to choose ,pls give us the clear video .