Whoever having this issue where the GPS signal icon keeps blinking and gauge no indicating movement here's the solution: get the device connected to the app using the Bluetooth, once connected enter the Device Settings and under Auto Configuration set the option to Auto Pause off. Seems like there is some battery saving crap that turns the signal off while steady. Also, the clock gets auto set once GPS signal is on default to UTC so just configure your houry zone to get this right. Is good device btw, but this shit took me couple of hours to figure out.
Hola! Comencé a usarlo y todo muy bien pero no veo las actividades en gestión de datos. Es raro porque se graban y guardan en el ciclo computador pero en la app no aparecen guardadas. Todo está bien Sincronizado pero no aparecen. Me pueden ayudar?
al terminar una vuelta le pones guardar??? yo al terminar me fijo en que la app este sincronizada y luego mantengo apretado el boton de la derecha hasta que arroja "save" ahi automaticamente me aparece en la app
Can't get mine to connect. It's bound to a factory reseted phone. I can't unbind it. What one should do in this case? It's a very upsetting mechanism 😢
Ok, I can in app add second bike with different parameters, I can connect to different sensors, I can change traces between bikes after ride but there is a bug when setting speed sensors wheel size - when I change one sensor's wheel size (from one bike) the other sensor also change its wheel size automatically which is bad because second one is from different bike :(
Same question for me. I expect the data will be Synct from the App if I configure and activate my bike, but this is not happen. If setting odo is not working, odo is useless for me.
What is the difference in battery usage between autosleep and autopower off functions? When there are both turned on should the speedometer goes off from sleep after 15 minutes?
Tenho exatamente esse modelo e ele simplesmente para de gravar a altimetria, tanto no meu aparelho quanto no aparelho que minha esposa usa, depois de um tempo pedalando a altimetria congela e as vezes volta e hora fica travada e não retorna mais, ele esta atualizado na última versão o firmware, por favor resolvam isso.
I get my speedometer yesterday. I have not tried yet but first impression is so cool. I ve magene speed cad and HR sensors, I will use them with speedometer.
Cortesemente, se si hanno più biciclette, si possono impostare profili differenti? Poi non capisco se funziona anche senza i sensori, oppure questi sono necessari? Grazie
Tenho um problema na configuração da pagina. Não consegue mostrar Velocidade como principal, na sequencia: Frequencia, Cadencia, Distancia e Tempo ?? Por algum motivo não opção desses dados na mesma pagina....
I think it's to do with the frequency of the data points that are recorded. Smart recording takes up less memory as it records data when it detects changes instead of every second no matter what. I believe it is to do with this .
Does this product show "average lap power" I can't find this in settings, what good is average power if you can't show your lap power for your interval?
Hello. I have one question: The display shows the power values. Does the cadence sensor also measure power? And how does it work. I will be glad to get your answer (I want to buy just a complete set).
Is it possible to initialize the km in the odometer? I have already done 1300 km, recorded with another instrument, and now BSC100 starts again from 0. It would be advisable to be able to enter the correct starting km
Infelizmente ele não faz isso, também acho q deveria ter a opção de colocar os km, porém só começa do zero, o que vc pode fazer é cadastrar a bike e aí nessa bike vc consegue colocar o km atualizado, vc pode usar o GPS em várias bikes, basta em entrar em configurações, meu equipamento e configurar as bikes, depois é só escolher qual vai usar ali vc consegue colocar os km atualizado de cada bike.
Almost perfect, but the GPS needs a firmware update to keep on and off backlight via button. The automatic backlight mode don't turn on the light when I'm in a tunnel or indoor parts of some circuits. Please, consider the feature in a future firmware update.
Hello, this is indeed a problem, because there is no light sensor, we are still working on the function of turning on the backlight when it detects entering the tunnel, thank you.
Mais où se trouve la date du jour sur ce compteur et comment transmettre les données vers mon ordinateur de mes sorties"vers STRAVA"???? quelle complication ce compteur, avant j'avais IGPSPORT IGS20E c'était très simple tout était automatique . je regrette cet achat . Tant que je roule beaucoup de renseignement à part cela §§ merci pour la réponse
Good day. Please, can the activity be copied to the computer via the USB port from the BSC100S cycle computer, like from type iGS50E? When I connect the iGS50E via the usb port, it appears on my computer as an external disk. Then I click on the ACTIVITIES folder and I can copy my ride to my computer. Is it also possible with BSC100S? Or it only goes through the STRAVA application. Milan Barčák Poprad Slovakia
Please help. I replaced my old phone with a new one. The igsports app fails to pair with my bsc 100s. It says "unbind from the device first." How to unbind bluetooth from this device?
After the BSC100s is turned on, press and hold the right button to enter the settings, and press the left button after entering E1 to cancel the pairing. Reconfigure the new phone.
I just purchased the BSC100S and I noticed that there is a time difference between the computer and my phone of 10 min., how do I fix the time on the bsc100s!
Hello. Im interested with this cyclocomputer and planning to upgrade my xoss g+. Just to be clear, this can connect cadence, speed and heart rate sensor right? And can I also change the Page 1 screen display to Gradient, Elevation Gain, Distance and Time?
@@iGPSPORT So the sensor does NOT come with the unit. I'm totally new to this - WTF are some ANT+ sensors? Are they things on your body like a FitBit or other similar device?
But can you please tell me how to pair bsc100s with another device without making factory reset? I"ve lost my phone and would like not to lose data from this computer
The automatic backlight can be set through the iGPSPORT APP, and it will automatically turn on/off the backlight according to the sunrise and sunset times.
Hi, I just bought this head unit along with your cadence and speed sensors, they’re are working fine, because Speed and Cadence are being displayed in real time, but Power isn’t being displayed when riding. Any idea what I can do to fix this?
Hello . I have just bought a BSC100S Have followed the set up instructions which are crap but can't get any speed reading and how do I set the wheel size I have 700x23 . So far I am not impressed ! Do I need a smart phone to use this thin ?
@@giulionicolini1181 percebi que meu igpsport acende a tela até mesmo durante o dia, quando passar em areas sombreadas de árvores, como desligar as luzes no botão?
I, too worried about not having such configurable data display because I have a power meter, and grade and cadence are important data when using power. However, I learned from the seller that the app does include data customization using the app. This video ends without showing how to do the customizations but it is shown @5:01 "The page configuration" in the lower left section of the display. When connected to the device you are offered the limited ability to customize each display data. My page 1 has UL=Power, UR=Cadence, LL=Grade, LR=Distance. You are not offered complete freedom to select any data in any location on any page but I have found a customization for each page that is acceptable. For example, on page 2 UL=Distance, UR=Timer, LL=Temp, LR=Ascent. Give it a try.
I moved from iGS10 speedometer because of lack autostart function but after first ride I'm disappointed - actual speed is delayed about two seconds, on iGS10 it was almost accurate. I work with the same speed sensor. Also, actual gradient is working bad - 2% on 40% mountain...
Hello. I have a problem with the DuoTrap S senson. In the iOS app I can find the DuoTrap S sensor but I cannot add it to the app. Did you encounter any problems with this sensor? Should I connect the sensor through the computer itself?
Hello Need help to upload data to the apps. And how do you indicate the Bsc100s that the 1st lap is starting? Asking because it starting counting 1 1/2 after i started and i do not why. Regards from Argentina
Hola, descargue la aplicación iGPSPORT para conectar BSC100S a través de Bluetooth para la sincronización de datos. ¿Quiso decir el pequeño número en la esquina superior izquierda? Los datos se refieren al número de vueltas. Puede mantener presionado el botón derecho para registrar manualmente la vuelta, o puede configurarlo para registrar automáticamente la vuelta a través de la aplicación iGPSPORT.
@@iGPSPORT When I turn it off and on again the activity is automatically saved and sent to the phone. Is there a way to reset the recording without saving the previous activity?
@iGPSPORT hey! This is still not a thing? I can't manually enter data into the overall distance? Im switching to this computer in the middle of the season and want to transfer at least basic data from the old computer. Especially the distance made this year. I'm sure that such a basic feature is somewhere out there.
@@iGPSPORT hello . Doing the unboxing and will try to set it up later on today , I will see if it’s user friendly for the 🇺🇸 USA market , and if it’s easy to navigate , to set it up via the APP . Will let You know Later if I need your Help , thanks .
Autopause works very good. Autostart - is not smart enough. When you stop recording you activity - it will close the file and save it. But when you start moving again, for example you need to pass 10 meters to you house - it will automatically record a new activity with this 10 meters. You have to turn off the device just after you stop recording, but in this case it will not have enough time to sync with the app. I switched autostart off.
@@iGPSPORT I know it. I tried it. Autostart and autopause is ON, long press right button will stop and save. But after that it will immediately start record next movement, even if it is 10 meters.
Год назад
muy lindo recien lo adquirí. Pero tengo un problema: en la app me dice que tengo una nueva versión de firmware (v1.4) y cuando le doy a actualizar me dice error... Necesito esa actualizacion :(
Bienvenidos nuestros nuevos usuarios. En cuanto al problema de falla de actualización, puede enviar un correo electrónico a nuestro personal de posventa para resolver: service@igpsport.com
Hi I bought it a few days ago, I connected all the sensors and also power meter. On the first ride it showed 185 which would be pretty good according to the smart trainer data but before the second ride I tried to readjust the look of the pages and the diameter of the wheel. But the next ride my bsc100 shows an average watts of 320 for 5.5h which doesn't match reality. I tried disconnecting the power meter several times, updating, calibrating - all fine. Could I have readjusted something in the bsc100 somewhere?
Do you mean that the power data of BSC100S is inaccurate? You can set the displayed power data through the APP, current/maximum/average. If you still have problems please contact us. service@igpsport.com
How this shit won't read my activity 2.times and it shit and the firmware version wont also upgrade on its own or notify the user so he can update the version...this is bullshit and a waste of money i should buy magene instead if i know this is gonna happen lot of loopholes and their site had no firmware update tutorial for bsc100s... I won't recommend this although its cheap but the functions aren't working well...
Simply speaking, iGS520 is more suitable for comparison with BSC200, because they both have line navigation function. But BSC100S is more convenient to use. If you need navigation, choose BSC200. If you don’t need it, then BSC100S is enough for you. BSC200: www.igpsport.com/bsc200 BSC100S: www.igpsport.com/bsc100s
I've had one since December (IGP620) - I've been doing everything, I can contact the manufacturer, but they're making no effort. I can't upload a route, I can't connect to the PC - never worked, and still performed as they prescribe!! Who please help me??? PLEASE!!🥵🥵
BUENAS NOCHES LES QUERIA PREGUNTAR COMO CONFIGURAR EL BSC100S ESTA EN HORA MILITAR Y QUIERO PASARLA A HORA NORMAL HORA COLOMBIANA EN LA CONFIGURACION ESTA - 05:000 Y SALE EN HORA MILIAR ME PONDRIAN AYUDAR GRACIAS!
Whoever having this issue where the GPS signal icon keeps blinking and gauge no indicating movement here's the solution: get the device connected to the app using the Bluetooth, once connected enter the Device Settings and under Auto Configuration set the option to Auto Pause off. Seems like there is some battery saving crap that turns the signal off while steady. Also, the clock gets auto set once GPS signal is on default to UTC so just configure your houry zone to get this right. Is good device btw, but this shit took me couple of hours to figure out.
My iGPSPORTS BCS100S order was arrived I love this budget iGPSPORTS bike computer. ❤️🇵🇭
Thanks for your likes.
hm?
Hola! Comencé a usarlo y todo muy bien pero no veo las actividades en gestión de datos. Es raro porque se graban y guardan en el ciclo computador pero en la app no aparecen guardadas. Todo está bien Sincronizado pero no aparecen. Me pueden ayudar?
al terminar una vuelta le pones guardar??? yo al terminar me fijo en que la app este sincronizada y luego mantengo apretado el boton de la derecha hasta que arroja "save" ahi automaticamente me aparece en la app
Can't get mine to connect. It's bound to a factory reseted phone. I can't unbind it. What one should do in this case? It's a very upsetting mechanism 😢
That's weird but I can't connect to satellite. The satellite icon is just flickering all the time for me.
Same🤬
Hi. Can I use it with two different bikes? Without changing tire size and sensors all the time manually
Ok, I can in app add second bike with different parameters, I can connect to different sensors, I can change traces between bikes after ride but there is a bug when setting speed sensors wheel size - when I change one sensor's wheel size (from one bike) the other sensor also change its wheel size automatically which is bad because second one is from different bike :(
@iGPSPORT Any chance for fix this bug?
How to enter odo in this bsc100s?
Same question for me. I expect the data will be Synct from the App if I configure and activate my bike, but this is not happen. If setting odo is not working, odo is useless for me.
A luz de fundo acende até mesmo quando passo em locais com arvores durante o dia, como regular isso?
What is the difference in battery usage between autosleep and autopower off functions? When there are both turned on should the speedometer goes off from sleep after 15 minutes?
Hi, this is based on an accelerometer. We will fix this problem.
Tenho exatamente esse modelo e ele simplesmente para de gravar a altimetria, tanto no meu aparelho quanto no aparelho que minha esposa usa, depois de um tempo pedalando a altimetria congela e as vezes volta e hora fica travada e não retorna mais, ele esta atualizado na última versão o firmware, por favor resolvam isso.
I get my speedometer yesterday. I have not tried yet but first impression is so cool. I ve magene speed cad and HR sensors, I will use them with speedometer.
Thank you for your compliment, you can also try to buy and use our speed cadence heart rate sensor
I want to use it on my trainer, how do I get the timer to just start timing?
Is there a charge for this device or is a battery replacement..
Hello, the built-in lithium battery is charged by type-c.
I can't get it to charge. Should it be on or off?
Hi can we change to a different font?more bold perhaps.
It's a nice idea.
Cortesemente, se si hanno più biciclette, si possono impostare profili differenti? Poi non capisco se funziona anche senza i sensori, oppure questi sono necessari? Grazie
I have a new IGP620, it is not possible to connect this to the PC!
How can I perform a firmware update please?
Bonjour je viens de l'acheter mais je ne peut pas démarrer un entraînement
Hello, I got Canyon Cockpit Mount-Garmin. Is BSC100S fit Garmin mount?
Hi, yes, iGPSPORT is the same as Garmin mount
Does the BSC100S support live tracking of your current location?
Tenho um problema na configuração da pagina. Não consegue mostrar Velocidade como principal, na sequencia: Frequencia, Cadencia, Distancia e Tempo ?? Por algum motivo não opção desses dados na mesma pagina....
Olá, podemos configurar necessidades pessoais em uma página específica.
What does the feature "Smart records" do?
I think it's to do with the frequency of the data points that are recorded. Smart recording takes up less memory as it records data when it detects changes instead of every second no matter what. I believe it is to do with this .
You are right, smart storage is to store more data, and the number of points recorded per second will be a little less.
Does this product show "average lap power" I can't find this in settings, what good is average power if you can't show your lap power for your interval?
Hello. I have one question: The display shows the power values. Does the cadence sensor also measure power? And how does it work.
I will be glad to get your answer (I want to buy just a complete set).
Hi, I would like to change the languange on my BSC100S. How do i go about doing that?
The app is not working and its unavailable at the play store.
Hello, please search for iGPSPORT Ride
Does it need to be connected to the phone via bluetooth the entire time that I'm recording my activities in order for it to record? or not?
The entire use process does not need to be connected to the APP, and can be run independently. Unless you need to sync ride data or update firmware.
How my bsc100s the distance wont count halfway in to the ride?but the speed counts only the distance screen doesn't not move or count.
Como configuro para receber a notificação de chamada?
Is it possible to initialize the km in the odometer?
I have already done 1300 km, recorded with another instrument, and now BSC100 starts again from 0. It would be advisable to be able to enter the correct starting km
Infelizmente ele não faz isso, também acho q deveria ter a opção de colocar os km, porém só começa do zero, o que vc pode fazer é cadastrar a bike e aí nessa bike vc consegue colocar o km atualizado, vc pode usar o GPS em várias bikes, basta em entrar em configurações, meu equipamento e configurar as bikes, depois é só escolher qual vai usar ali vc consegue colocar os km atualizado de cada bike.
Hello there's a delayed about 3second delay when the speedometer sleep you need to restart it to remove the delay response
Hello, we will gradually optimize this problem.
Me tira mensaje en pantalla " UPA" y no lo puedo volver a encender, me darían ayuda? Gracias
pleaese help me how to change battery
Hi please contact service@igpsport.com , we have professional team to help you.
How to change altitude to gradien ? There's no option in that grid..
Can I connect 3 sensors at the same time? I have Xoss speed, cadance and heart rate sensor.
No sé puede conseguir el reloj con Strava
Hi how to change na time zone?
Almost perfect, but the GPS needs a firmware update to keep on and off backlight via button. The automatic backlight mode don't turn on the light when I'm in a tunnel or indoor parts of some circuits.
Please, consider the feature in a future firmware update.
Hello, this is indeed a problem, because there is no light sensor, we are still working on the function of turning on the backlight when it detects entering the tunnel, thank you.
Hello, how to set the clock? I set time zone but it false😢
Useful info starts at 0:41
Does this have sound for alerts? I noticed 2 holes right above the charging port so I was thinking if those were speakers of the unit. Thanks!
Sorry, no beeping, that hole is a vent.
Hello... Can I connect magene cadence sensor and Garmin instinct watch as heart rate monitor
Hello, the cadence meter can be connected. For the watch, please confirm whether it supports heart rate broadcasting.
Buenas acabo de adquirir uno, y quisiera sabe si se puede modificar el odometro, gracias.
Não pode
Hello Can this cyclocomp be used for indoor training?
Hello, if your smart trainer connects power, cadence, and speed data through ANT+, then BSC100S can connect.
Mais où se trouve la date du jour sur ce compteur et comment transmettre les données vers mon ordinateur de mes sorties"vers STRAVA"???? quelle complication ce compteur, avant j'avais IGPSPORT IGS20E c'était très simple tout était automatique . je regrette cet achat . Tant que je roule beaucoup de renseignement à part cela §§ merci pour la réponse
Can i pair my garmin watch with the device for monitoring HR info?
with epix gen 2 works
Hello, which Garmin watch?
Is it radar compatible?
How to You enter your ftp to inform power thresholds ?
Hello FTP needs to be set in the APP.
Hello, why my latest activity failed to upload in data management in igp sport app ?
Yes me too,i cannot connect my igsport speedometer to igsport app
How to customize screens?
Hi, Data can be set after connecting the APP.
How to synchronize activities record with Strava?
Hello, just bind the strava account in the APP.
Hi there. Can I use it with Wahoo Tickr Heart Rate Monitor?
Can this device directly use without speed sensor? Cause I switch ON & cycling is nothing happen.
Hello, yes, GNSS supports five types of satellite positioning.
@@iGPSPORT Is there any manual, my GPS signal is keep blinking & I don't know how to solve it.
Thank you
Savez s'il est possible de connecter un compteur BSC100s directement à l'appli Strava sans passer par l'application IGPsport ? Merci
Good day.
Please, can the activity be copied to the computer via the USB port from the BSC100S cycle computer,
like from type iGS50E?
When I connect the iGS50E via the usb port, it appears on my computer as an external disk.
Then I click on the ACTIVITIES folder and I can copy my ride to my computer.
Is it also possible with BSC100S?
Or it only goes through the STRAVA application.
Milan Barčák
Poprad
Slovakia
Hi, Milan Barčák.
BSC100S does not support connecting to a computer via USB. You can synchronize data/Strava via Bluetooth.
Roy
iGPSPORT
Please help. I replaced my old phone with a new one. The igsports app fails to pair with my bsc 100s. It says "unbind from the device first." How to unbind bluetooth from this device?
After the BSC100s is turned on, press and hold the right button to enter the settings, and press the left button after entering E1 to cancel the pairing. Reconfigure the new phone.
@@iGPSPORT thank you i couldn't find this anywhere else
I just purchased the BSC100S and I noticed that there is a time difference between the computer and my phone of 10 min., how do I fix the time on the bsc100s!
Hello, you need to enter the settings to modify the time zone.
Що робить, якщо велокомп'ютер не ловить GPS, а датчиків немає? Як записувати тренування через велокомп'ютер?
Привіт, ви можете тренуватися за пульсом.
I ordered my unit, for speed km/h and for inclination %, Do I need extra sesnsors? In my case I don´t need heart recording
Hello, the slope can be obtained without a sensor.
Hello. Im interested with this cyclocomputer and planning to upgrade my xoss g+. Just to be clear, this can connect cadence, speed and heart rate sensor right?
And can I also change the Page 1 screen display to Gradient, Elevation Gain, Distance and Time?
Hello, it supports ANT+ sensors.
@@iGPSPORT So the sensor does NOT come with the unit. I'm totally new to this - WTF are some ANT+ sensors? Are they things on your body like a FitBit or other similar device?
But can you please tell me how to pair bsc100s with another device without making factory reset? I"ve lost my phone and would like not to lose data from this computer
Entering the E1 settings will unbind your original mobile phone.
Hello, I’ve been using the device with a speed and cadence sensor. But am I able to pair my Apple Watch as a HRM sensor with the device?
Hi, not yet, because there is no way for the Apple Watch to broadcast heart rate data.
How to set up the auto back light
The automatic backlight can be set through the iGPSPORT APP, and it will automatically turn on/off the backlight according to the sunrise and sunset times.
Como fazer essa configuração? Já olhei e não achei nada.
Hi, I just bought this head unit along with your cadence and speed sensors, they’re are working fine, because Speed and Cadence are being displayed in real time, but Power isn’t being displayed when riding.
Any idea what I can do to fix this?
Do you have a power metre connected to the device?
Hello . I have just bought a BSC100S Have followed the set up instructions which are crap but can't get any speed reading and how do I set the wheel size I have 700x23 . So far I am not impressed ! Do I need a smart phone to use this thin ?
Se vc não estiver usando nenhum sensor não precisa fazer nada, o GPS vai marcar automaticamente não precisa cadastrar a roda
backlite? battery charging?
Backlite pressing one button, lite off during day (see instruction)
@@giulionicolini1181 percebi que meu igpsport acende a tela até mesmo durante o dia, quando passar em areas sombreadas de árvores, como desligar as luzes no botão?
Can I use an apple watch as the Bluetooth hearth rate monitor connected to the BSC100S since it has both ANT+ and BLE5.0?
Sorry, Apple Watch cannot broadcast heart rate to BSC100S.
How about Samsung galaxy watch or pixel watch?
What is certain is that if your watch can broadcast heart rate data via Bluetooth, the BSC100S will be able to connect.
Will the older type of heart rate monitor iGPSPORTS HR35 work for me with this type?
Hello, it can be used together.
One more thing, where will the heart rate be shown on the display while driving?
Can be set according to your needs.
i cant connect it to my app. how do i solve this? It keeps pairing via notification center or popups?
I am very sorry to bring you a bad experience, you can contact our after-sales staff by email: service@igpsport.com
Does it show a temperature???🥺
Yes, temperature is displayed.
how do i customize the data shown per page??
In the 'Page Settings' on the 'Device' tab in the app
In the 'Page Settings' on the 'Device' tab in the app
Can I still use the BCS100S without purchasing the censors, thank you.
Hi, it can be used independently.
@@iGPSPORT Thank YOU so much !
How can I set the exact time? My computer is 6-7 minutes fast.
Hello, the time is automatically calibrated after GPS positioning.
@@iGPSPORT thanks, it worked
I Miss the feature on the 50E i find it useful that i can both look at the gradient cadence at the same layout
BSC100S has other more advantages.
I, too worried about not having such configurable data display because I have a power meter, and grade and cadence are important data when using power. However, I learned from the seller that the app does include data customization using the app. This video ends without showing how to do the customizations but it is shown @5:01 "The page configuration" in the lower left section of the display. When connected to the device you are offered the limited ability to customize each display data. My page 1 has UL=Power, UR=Cadence, LL=Grade, LR=Distance. You are not offered complete freedom to select any data in any location on any page but I have found a customization for each page that is acceptable. For example, on page 2 UL=Distance, UR=Timer, LL=Temp, LR=Ascent. Give it a try.
Thanks for your reply, it's great!
What value to set if I have 27.5 inch wheels ?
No need, its uses satellites
I moved from iGS10 speedometer because of lack autostart function but after first ride I'm disappointed - actual speed is delayed about two seconds, on iGS10 it was almost accurate. I work with the same speed sensor. Also, actual gradient is working bad - 2% on 40% mountain...
Hi, this is based on an accelerometer. We will fix this problem.
@@iGPSPORT When can we expect the upgrade?
Nao estou conseguindo logar está dando erro! Preciso que avaliem o erro e o corrijam!
Can I create 2 profiles for that device? Like one for mi MTB an the other for the road bike? I say cause the wheel size on the start settings
Sim pode, só entrar em meus equipamentos e cadastrar as bikes depois escolher qual vai ser usada
the app dosnt work, i cant syncronize my routes!!
Incoming calls arent showing on the Smart computer Even tho it's paired with the phone
I am very sorry to bring you a bad experience, you can contact our after-sales staff by email: service@igpsport.com
how to set custom odo value?
It can be set through iGPSPORT Ride APP.
@@iGPSPORT the app is installed but I couldn't find it there. please give me a hint where i can find this setting in the application
Can we use this bike comp for indoor cycling, by pairing it with speed sensor?
Yes ... I just paired my BSC100s to my speed sensor and my cadence sensor for indoor spinning.
Hello, no problem at all.
Thank you for your reply.
Does this have the capability to sync with an indoor trainer?
Yes, with sensors.
Yes, connect the trainer as a sensor.
Device seems great. Is it compatible with Bontrager duotrap sensors?
Hello, support, use ANT+ connection.
Hello. I have a problem with the DuoTrap S senson. In the iOS app I can find the DuoTrap S sensor but I cannot add it to the app. Did you encounter any problems with this sensor? Should I connect the sensor through the computer itself?
Não esta logando meu app, e não consigo baixar nenhuma atividade BSC100s
Can connect magene hrm?
Yes, you can try to buy and use our HR40 heart rate monitor, it is also good.
when I want to sync with strava I get that the third party account has already been linked by another account???
Hello, please click to view: support.igpsport.com/hc/en-001
Just received this! I bought it with cad70 which seems be accurate. One problem it doesn't have beeping noises or is it like that?
Yes, the BSC100S does away with the speakers.
@@iGPSPORT cool! I guess i don't mind then. The speedometer is really great!
We will keep working hard!
Hello
Need help to upload data to the apps.
And how do you indicate the Bsc100s that the 1st lap is starting? Asking because it starting counting 1 1/2 after i started and i do not why. Regards from Argentina
Hola, descargue la aplicación iGPSPORT para conectar BSC100S a través de Bluetooth para la sincronización de datos.
¿Quiso decir el pequeño número en la esquina superior izquierda? Los datos se refieren al número de vueltas. Puede mantener presionado el botón derecho para registrar manualmente la vuelta, o puede configurarlo para registrar automáticamente la vuelta a través de la aplicación iGPSPORT.
@@iGPSPORT Como hago para que registre en forma automatica la vuelta?
Configure vueltas automáticas a través de la aplicación iGPSPORT, que se puede configurar por tiempo, distancia y ubicación.
BSC200也可以弄一個像這樣的影片嗎？剛從淘寶淘了一個
收到您的需求，我們馬上安排。謝謝您的建議。
How to reset recording?
Hello, turn off and on again, you can start recording again.
@@iGPSPORT When I turn it off and on again the activity is automatically saved and sent to the phone. Is there a way to reset the recording without saving the previous activity?
Is any possiblity to write to this toy, save the bike mileage manually. I have about 1200 km and I dont want start from 0..?:)
Sorry, this feature cannot be set up yet.
@iGPSPORT hey! This is still not a thing? I can't manually enter data into the overall distance? Im switching to this computer in the middle of the season and want to transfer at least basic data from the old computer. Especially the distance made this year. I'm sure that such a basic feature is somewhere out there.
Infelizmente ele não tem essa configuração
Just received my unit today , waiting to pick it up from the mail , will give review and feedback. .
What can I do for you?
@@iGPSPORT hello . Doing the unboxing and will try to set it up later on today , I will see if it’s user friendly for the 🇺🇸 USA market , and if it’s easy to navigate , to set it up via the APP .
Will let You know Later if I need your Help , thanks .
@@joeochoa4030 how was it? Do a video review please
Soooo? Where is your review and feedback? You did not ride for two weeks?
Thanks for your endorsement!
Does it have autostart and autopause?
Hello, there are automatic start and automatic pause.
Autopause works very good. Autostart - is not smart enough. When you stop recording you activity - it will close the file and save it. But when you start moving again, for example you need to pass 10 meters to you house - it will automatically record a new activity with this 10 meters. You have to turn off the device just after you stop recording, but in this case it will not have enough time to sync with the app. I switched autostart off.
The situation you mentioned should not happen in theory, and it will be automatically saved after automatic pause?
The button of BSC100S is to long press the right button to save.
@@iGPSPORT I know it. I tried it. Autostart and autopause is ON, long press right button will stop and save. But after that it will immediately start record next movement, even if it is 10 meters.
muy lindo recien lo adquirí. Pero tengo un problema: en la app me dice que tengo una nueva versión de firmware (v1.4) y cuando le doy a actualizar me dice error... Necesito esa actualizacion :(
Bienvenidos nuestros nuevos usuarios. En cuanto al problema de falla de actualización, puede enviar un correo electrónico a nuestro personal de posventa para resolver: service@igpsport.com
Best I've ever got.
Thank you for your message, we strive to do better
How much is thins cyclocomputer?thanks for the reply
Hi I bought it a few days ago, I connected all the sensors and also power meter. On the first ride it showed 185 which would be pretty good according to the smart trainer data but before the second ride I tried to readjust the look of the pages and the diameter of the wheel. But the next ride my bsc100 shows an average watts of 320 for 5.5h which doesn't match reality. I tried disconnecting the power meter several times, updating, calibrating - all fine. Could I have readjusted something in the bsc100 somewhere?
Do you mean that the power data of BSC100S is inaccurate? You can set the displayed power data through the APP, current/maximum/average. If you still have problems please contact us. service@igpsport.com
How this shit won't read my activity 2.times and it shit and the firmware version wont also upgrade on its own or notify the user so he can update the version...this is bullshit and a waste of money i should buy magene instead if i know this is gonna happen lot of loopholes and their site had no firmware update tutorial for bsc100s... I won't recommend this although its cheap but the functions aren't working well...
@@iGPSPORT does this devise show average lap power?
Bsc100 or igs520 ?
Simply speaking, iGS520 is more suitable for comparison with BSC200, because they both have line navigation function. But BSC100S is more convenient to use. If you need navigation, choose BSC200. If you don’t need it, then BSC100S is enough for you.
BSC200: www.igpsport.com/bsc200
BSC100S: www.igpsport.com/bsc100s
I've had one since December (IGP620) - I've been doing everything, I can contact the manufacturer, but they're making no effort. I can't upload a route, I can't connect to the PC - never worked, and still performed as they prescribe!! Who please help me??? PLEASE!!🥵🥵
I cant understand how to change a time🙄
When you are outdoors and connected to GNSS, the time will be automatically calibrated.
BUENAS NOCHES LES QUERIA PREGUNTAR COMO CONFIGURAR EL BSC100S ESTA EN HORA MILITAR Y QUIERO PASARLA A HORA NORMAL HORA COLOMBIANA EN LA CONFIGURACION ESTA - 05:000 Y SALE EN HORA MILIAR ME PONDRIAN AYUDAR GRACIAS!