DHCP Lab for Multiple VLAN in Packet Tracer | Networkforyou | CCNA 200-301
HTML-код
- Опубликовано: 27 авг 2022
- DHCP Lab for Multiple VLAN in Packet Tracer | Networkforyou | CCNA 200-301
#ccna #networkforyou #DHCP
Follow us on Instagram / _networkforyou_
Hello Everyone,
In this video we are going to do DHCP Lab Demo in packet tracer.
If you have any question what app us.
About us:
We are Team of Senior Engineers have more than 12 years experiences and providing CISCO Training classroom, on-site and online training on various Networks, Python for Network Engineer, CISCO Certifications Like CCNA 200-301, CCNP ENCOR 350-401, CCNP ENARSI 300-410 and Firewall etc. Also working as full time as MSO (Mobile Switching Office) Engineer.
Thanks
Thnak you sir for the Video, I learnt from your video better than from my teacher I would say
Happy to help
Thank you very much, I got an exam i do all like your guide and got 9,5 ♥️
Hi,
Congratulations 🎊
Thanks, bro. As someone who is new to these topics, I found answers to many questions in my mind ☺👏
Great.
This explanation is absolutely a mass.
what app us for more support.
successfully done🎉🎉🎉 Thanks sir .. Please create one big lab with Redundancy of all things L3 switches also firewall and routers......Which will give Total connectivity and their commands knowledge
Ok sure.
Thanks
Roses are red.
Violets are blue.
There's awlays an Indian youtuber that will save you 😊.
Thank you so much sir for a very clear explanation.
Thank you so much 😀
Thanks for this video👍👍👍
👍
Thank you very much for your video. It have helped a lot.
👍
Thanks you help me at School!
Love from italy
Thanks 👍
thanks bro, what a lifesaver :))))
👍
Thanks bro, you are an idol in my class, great lesson.
Thanks 👍
This semi-worked for me. Devices get ip with DHCP but not the ones set for the VLAN.
Hi,
What app us we will support you. Or send your packet tracer file we will check and update you
same for me not working for vlan
great
👍
thank you sir
👍
Straightforward and has helped me a tonne, how would i do the same thing but also with a DNS server?
Hi,
What app us give us full detail about your requirement.So we will make video on that.
Thanks
i love you
Hi,
Thanks
thanks my ENG
you are welcome.
Very good.. Can you do with the internet outside?
Hi,
Okey sure.
Thanks
I am getting dhcp ip to my pc but they couldn’t communicate with the pc configured under another dhcp subnet. What to do here ?
Hi,
Try to check maybe Intervlan is not configure correctly.
Thanks
how come when I go to assign DHCP is says "HDCP failed. APIPA is being used" I followed everything you did
Hi,
What app us our team will check and update you.
Thanks
what if we use a router instead of ip switch (SW1)?
Hi,
You mean in place of L3 switch if you use router then also you can do you need to use IP helper command and also you need to do intervlan routing by using router on stick method.
Thanks
I can't seem to get this working, however there are a few questions I have..
How can we route traffic without a router? I didnt think switches were intelligent enough to do this.
We set devices default gateway as 192.168.1.1 but no device has this and it isnt set anywhere in the tutorial?
I may be naïve and just not understand so looking for some explaination :)
Hi,
It is working for us. What problem you are facing? Did you try this ? Here we are using L3 switch and we enable routing in L3 switch and we done intervlan routing. You can see. Or Join our telegram channel we already share this topology and config file so you can check and try. Link for Telegram channel is in our video description.
Thanks
I have a table of mac, can i bind ip for each mac address? Can you help?
p/s: i found the solution, using client-indentifier to set a static IP for each known mac address.
Hi,
Yes but in real world we will binding in dhcp server.
I thing that option is not working in packet tracer
@@networkforyou11 what about only provide ip for mac in list? (Whitelisted mac)
Very helpful. Thank you!
👍
@@networkforyou11 There’s probably not room for this. I was trying to recreate this setup using a standard router and couldn’t get it to work (using sub-interfaces / IP addresses). The request messages never make it past the router. Is it even possible?
can you maby put the text document in the discription for download?
Hi,
Join our telegram channel. In that we share all lab with Configuration.
Thanks
I followed the same commands but getting error on the PC “ DHCP Failed APIPA is being used”
look if the interfaces for tne gateway are config
Hi
Yes try
Hi,
Try or what app us we will support you.
Thanks
can you please share the pkt
Hi,
Join our telegram channel we already share that packet tracer file.
Thanks
I followed this exactly and i get DHCP failed.
Hi,
Maybe you missed any configuration.
What app your topology packet tracer file in our what app number. We will check and update you what issues you have.
Thanks
@@networkforyou11 No, We followed exactly the same way, I have tried three times, all failed. There is no maybe, you are wrong is wrong.
@@garyzhai9540 did you fix the issue i tried many times i am not getting ip
i tried the same but its not working
Hi,
What app us we will guide you