This looks like the same stock ugly cluster for the srx! Do you have the direct link for the cluster? The link in your description takes me to a selector... thanks!
Thanks for the instructions, I got my right steering wheel control for the volume and media not working after the cluster swap, the control for the cluster still works, is that possible I accidentally popped a connector while removing/re-installing the cluster or just try to change the whole control?
The steering wheel controls are not affected by the cluster removal . But I guess I would check , maybe when the cover for the steering wheel was remove you touched something or check to make sure the pins in the cluster u installed didn’t get bent
Great video, I have an ats 2014 2.0 t, will support the digital cluster of an xts 2013? I've read that you have to make a modification to fit, but I mean if it's something like plug and play, thanks for your time
Great how to video! I would like to see some of the other options on the new cluster. Can you hide the mileage? I know on the LCD cluster if it’s in sport mode you can’t see the mileage.
No , I looked into It and you need to replace the windshield cause of the reflective area , but there is some one that has done it , and after all that money and time he said it wasn’t worth it so I left it alone .
Good video!! Do you happen to know if you can change the font style on the gauge? For example, I have a 2016 CT6 and I like the display better on the 2017 CT6. The font on the speed readout is cleaner looking and on the top gauges, the 2016 has a blue ring around the 4 gauge readouts where the 2017 doesn't. Thank you very much!
Thank you . So I’m sure the display would fit but you would have to contact , the person who did the programming for my gauges to see if it can be programmed .
@@PRviewsvlogs Thank you. I was just hoping that maybe I could find the backdoor if you will into reprogramming the display just to change the look to the 2017. Keep up the good work!
So just to be clear, I have a 2016 CTS 3.6L- I should be able to purchase that LCD cluster using that part #, have it programmed and it should work? No modifications required?
@@PRviewsvlogs Thank you! Sorry, I'm just super cautious about it cause it's a lot of money to spend to get the wrong part or whatever. But I just ordered mine, can't wait to get it installed!
@@PRviewsvlogs Nah, I searched the part number and ordered it new. I am going to contact him though regarding the programming to see if we can work something out. Thanks again for all the help, im super excited about this upgrade.
@@PRviewsvlogs Just wanted to update you, got my cluster in today and got it installed thanks to your video. Super happy with it and thanks so much for this easy to follow tutorial!
I upgraded my cluster on my 16 CTS using this video thank you. I also was able to buy the newer version cluster from 16+ cts v for 400$ on eBay and reprogram it using the vxdiag nano from Amazon. I’m also hoping to add HUD too, do you have any updates on it?
Your welcome , as for the HUD you need to replace the windshield due to the defective area made to work with it , it’s actually not bad it’s about $500 for the windshield plus parts for the HUD possible about $800 total
So like my cluster it has the female port for the hud there should be no reprogram or extra wiring you are going to need the actual HUD the HUD buttons and the grill cover
The link for the website is on the description, with the part number , also you can contact blac lacquer he might have some for sale at times , also try eBay for the part and blac lacquer can program it for you
@@Gaitan6408 I’m saying the part number I gave at the time where digital gauges , I do t know what they came out of contact the person I told u in the video he got them for me
I live in Saudi Arabia, is the programming so hard to be done? Or is it easy to find someone to program it? What the programmer need to program the LCD Gauge? I don't want to waste money with no results you know ;\
JUST CURIOUS I BOUGHT MINE FROM WHITEAUTOANDMEDIA FOR MY 2014 CTS 2.0. I NO LONGER HAVE THE CAR BUT KEPT THE CLUSTER. COULD I GET IT PROGRAMMED TO MY 2018 CADILLAC CT6 THAT I HAVE NOW?
What orange check engine light ?? I have a TPMS light not a check engine light , and I explained that in the video , I have aftermarket wheels and the sensors they sent me didn’t program to the car nothing to do with the install of the gauges
No it’s still on , the tire pressure light has nothing to do with the dash , it cause I have after market wheels with after market sensors and the sensors are not reading
PRviewsvlogs you’re bad ass bro. I been trying to do that to the V Sport since I got it a year ago but why pay $10,000 more for it on the premium when you can install it yourself for like 700$. Good man
PRviewsvlogs I have no luck on eBay for it, been looking for it. I’m going to have to buy it new of gm parts direct for like 600$ cause it’s 35% percent off. Goes for 935$ on the reg
Contact black lacquer , and see if he can program them , I know that one person fit them in his ATS but it was a 2015 and he had to cut some part of the dash to fit it properly
Hey bro I got a question about that mod I have a 13 XTS and I bought a 14 Platinum XTS is currently in my vehicle and it's getting a lot of errors on things that are not on my car will this cause a problem to the actual operation of the vehicle long-term?
I don’t get the question , you have a 13 XTS and you a 14 XTS gauge ? Or car not sure what your trying to say , but if you didn’t program the gauges to the car yes you will have errors will it cause problems probably not cause it’s just showing errors cause it can find the sensor for things that are not there , but you shouldn’t have this issue if you had someone program the gauges to your vin
There no miles in the dash. If you install used speedometr you will see just -------- , when you write vin inside speedometr you will see you real miles. Miles in BCM, not in IPC
I would honestly watch more of your videos and I would subscribe but honestly you waste way too much time talking about stuff that has nothing to do with the video and no one wants to see you bro I'd rather just see the car and the process
I like the little start-up animation too.. not to crazy, simple, but still cool
The CTS and ATS come with some pretty PATHETIC 🤢 stock gauges…
so this is a GREAT UPGRADE for both!👍
Wow great video, super informative and easy to follow. Looks like a professional video
Thank you
This looks like the same stock ugly cluster for the srx! Do you have the direct link for the cluster? The link in your description takes me to a selector... thanks!
Thanks for the instructions, I got my right steering wheel control for the volume and media not working after the cluster swap, the control for the cluster still works, is that possible I accidentally popped a connector while removing/re-installing the cluster or just try to change the whole control?
The steering wheel controls are not affected by the cluster removal . But I guess I would check , maybe when the cover for the steering wheel was remove you touched something or check to make sure the pins in the cluster u installed didn’t get bent
I see, thanks a lot!@@PRviewsvlogs
Great video, I have an ats 2014 2.0 t, will support the digital cluster of an xts 2013? I've read that you have to make a modification to fit, but I mean if it's something like plug and play, thanks for your time
I believe you can fit them but like u said there is some modifications you need to make .
Great how to video! I would like to see some of the other options on the new cluster. Can you hide the mileage? I know on the LCD cluster if it’s in sport mode you can’t see the mileage.
Thank you I might make a video with the settings and different options
How do we contact your guy? 2014 CTS sedan 2.0t awd luxury wanting to switch to digital. Still the same as two years ago?
All his info is in the description
Did you ever try to install the heads up display?
No , I looked into
It and you need to replace the windshield cause of the reflective area , but there is some one that has done it , and after all that money and time he said it wasn’t worth it so I left it alone .
I have a 2013 XTS, I have always wanted to do it, do you think it is possible?or
This video was posted 2 years ago. Do you think you're contact still programs these?
He still does
Very informative
How do I start following @blac_lacquer so I can get in touch with him?
Good video!! Do you happen to know if you can change the font style on the gauge? For example, I have a 2016 CT6 and I like the display better on the 2017 CT6. The font on the speed readout is cleaner looking and on the top gauges, the 2016 has a blue ring around the 4 gauge readouts where the 2017 doesn't. Thank you very much!
Thank you . So I’m sure the display would fit but you would have to contact , the person who did the programming for my gauges to see if it can be programmed .
@@PRviewsvlogs Thank you. I was just hoping that maybe I could find the backdoor if you will into reprogramming the display just to change the look to the 2017. Keep up the good work!
Was it plug and play or did you have to have it programmed first?
Did you watch the video , I explained everything on the video
Are the red lights that are in place of HUD for collision alert still functional or are they removed or on the cluster itself
They still function
does it work with sportmode? like does it turn white like in the vsport
I know what your taking about but it only does that With the Newer LCD gauges 2016 and up and those gauges don’t work well on 2015 and down .
Very nice. I am from europe I have a Cadillac ct6 2016 with analog instrument cluster. Whether and where you can buy a 3D digital version?
Do u have the link to it... I have a 2015 cts
All info should be in description
i have a cts 2011 where you think i could find some like this or is mine too outdated ?
No it doesn’t work for your car
So just to be clear, I have a 2016 CTS 3.6L- I should be able to purchase that LCD cluster using that part #, have it programmed and it should work? No modifications required?
Yes .
Just like in the video
@@PRviewsvlogs Thank you! Sorry, I'm just super cautious about it cause it's a lot of money to spend to get the wrong part or whatever. But I just ordered mine, can't wait to get it installed!
Your fine , yes only 2014-2016 if it’s newer then that it’s a different connector , did you contact black lacquer first he might have a extra one
@@PRviewsvlogs Nah, I searched the part number and ordered it new. I am going to contact him though regarding the programming to see if we can work something out. Thanks again for all the help, im super excited about this upgrade.
@@PRviewsvlogs Just wanted to update you, got my cluster in today and got it installed thanks to your video. Super happy with it and thanks so much for this easy to follow tutorial!
nice job man, what is the link for the cluster ?
I put the person you need to contact in the description from what I know he has two of the newer ones in stock now
I only skimmed through your video so I may have missed this part, but did you have to cut up the inside of the dash (behind the cluster)? Thanks!
No not at all
@@PRviewsvlogs okay thank you. I did some more research and it’s the ATS’s need to have a little cutting and shaping to fit the new screen.
Oh you did not mention you had a ats , yes those I’ve heard you have to trim the dash a little
Great video! But having the mileage not correct would bother me. When it gets programmed one would think the mileage would be part of that.
If you watch the video till the end , I showed that the mileage corrected
Did the correct mileage ever come up
Yes if you watched the whole video I show it
I upgraded my cluster on my 16 CTS using this video thank you. I also was able to buy the newer version cluster from 16+ cts v for 400$ on eBay and reprogram it using the vxdiag nano from Amazon. I’m also hoping to add HUD too, do you have any updates on it?
Your welcome , as for the HUD you need to replace the windshield due to the defective area made to work with it , it’s actually not bad it’s about $500 for the windshield plus parts for the HUD possible about $800 total
@@PRviewsvlogs is installing the HUD parts plug and reprogram? Or is there any wiring to do?
So like my cluster it has the female port for the hud there should be no reprogram or extra wiring you are going to need the actual HUD the HUD buttons and the grill cover
@@PRviewsvlogs I have the pre-crash light. Do you think I need to replace the windshield?
Yes
Is there any trimming to be done to the unit for it to fit properly
No
Hell yeah man looks nice, do you know if the cts has the slot for heads up display?
No , but it can be installed but the windshield has to be replaced so it will have the reflective portion
What spark plugs do you use now? Cause the OEM ones discontinued
I used O.E when I did mine
Nice work!
Did it have the v performance dash display option?
No
What about for a 2013 ATS same fit?
I’ve seen people do for the ATS , there is some nosing needed
Nut drivers are not expensive and would’ve been great to have used here.
Job got done
Hey I have a 2014 CTS4 luxury and want that dash please link where to get it I can’t find it
The link for the website is on the description, with the part number , also you can contact blac lacquer he might have some for sale at times , also try eBay for the part and blac lacquer can program it for you
I have a 2016 CTS luxury 3.6, will it work, also the part number you gave is for a 2014 CTS, WHAT DID YOUR GUAGES COME OUT OF, THANKS
A 2015 CTS , the 2016 has diferente digital Gauges but yes it can work
I’m saying the part number you gave are not digital guages, there for a 2014
@Gaitan6408 you need to contact the person that did my programming he might be able to get them
@@Gaitan6408 I’m saying the part number I gave at the time where digital gauges , I do t know what they came out of contact the person I told u in the video he got them for me
Never seen part # that you used for instrument cluster
The part number is one the description
I wanna do my XTS but i can’t find any videos for it
Cause there is to much modification to do and not worth it
Your tire sensor is on is it just because of air or doesn't work Properly?
Bro did you watch the video ?? I said why it’s on on the video
Where can I get the same front spiltter with the v sport logo on it
They don’t make it it the logo was a vinyl sticker
But look the websites are saying this will not fit my 2014 cts. Do I buy it regardless?
2014 has two diffent style of CTS the gen 2 and gen 3 put your vin # in
do you know if it is the same process for a 2017-2019 CTS?
Yes
But I would get the upgraded LCD screen
What was the cost of programming and can I get the programmers info
All info is in the description
Will this work on a SRX too to swap out the cluster
No
@@PRviewsvlogs it’s the same cluster
@@PRviewsvlogs I took it apart it’s the same cluster you had at first the plug the same and everything
@@AG357AG someone already tried and it did not work cause it won’t program to the car , and the parts don’t fix exact . So no it won’t work
Where did you get the diagrams for the dash removal??
Not diagrams of dash removal , those are pics from www.gmpartsdirect.com
Where did you get the cluster?
eBay
🔥🔥
That website for gm parts doesn't exist
It’s updated ... www.gmpartsdirect.com
So i have those similar stock gauges (exact look really) on my 2013 Cadillac SRX. Could i upgrade to the CTS all digital gauges?
I’m not sure you would have to research abs see if the gauges of the CTS are the same part number as SRX and see if it was even a option for car .
do you know if the the ats has an digital gauge cluster options ?
appreciate your help
It does not , I’ve seen a few people put the CTS one but heard the dash and cluster have to be modified to fit
Does this work On a 14 base cts?
Yes it does
I live in Saudi Arabia, is the programming so hard to be done? Or is it easy to find someone to program it? What the programmer need to program the LCD Gauge? I don't want to waste money with no results you know ;\
I don’t know how easy it’s is to program , that’s why I didn’t do it myself
Do you know if it fits on a 2014 CTS V? Thank you for your time...
2014 CTS V 2nd gen ? No it does not complete different cars and computer will not fit
Do they have this for the XTS ?
Contact info for person who does programming for the is in the description ask them .
I have a 2015 cts i want to swap it what did cost u
Info is in the video description with part number. I'm seeing $673.85 on my end.
He also has added info for a guy who can program it to your VIN.
Can you do this on a 2010 CT’s wagon
No it’s a completely different car
JUST CURIOUS I BOUGHT MINE FROM WHITEAUTOANDMEDIA FOR MY 2014 CTS 2.0. I NO LONGER HAVE THE CAR BUT KEPT THE CLUSTER. COULD I GET IT PROGRAMMED TO MY 2018 CADILLAC CT6 THAT I HAVE NOW?
Will not fit
@@PRviewsvlogs oh ok. Thought it would since I've seen that same cluster on ct6 and even escalades of that era
I believe that they have some differences in the mounting points
I would call CADILLAC get the part numbers for the clusters and cross reference if they are the same part number your good to go
And if so is it possible to program it to the ct6 after it has been programmed to the cts?
Where do I get this at!?
I put all links and contact in description
Better lighting would make a big difference.
Sure I’ll send u my address and you can buy it for me , thanks for offering 😊
Why did it show that orange engine check light after you already installed and were driving it?? Did it go away??
What orange check engine light ?? I have a TPMS light not a check engine light , and I explained that in the video , I have aftermarket wheels and the sensors they sent me didn’t program to the car nothing to do with the install of the gauges
PRviewsvlogs Dash looks great. I’m just asking what the orange light is at the bottom right??
Yes that a tire pressure light .
@@PRviewsvlogs, did you ever get the tire pressure light to go out?
No it’s still on , the tire pressure light has nothing to do with the dash , it cause I have after market wheels with after market sensors and the sensors are not reading
I have a 2013 xts can it work there ?
Yes it can, my buddy actually has one available for a XTS now
I wanna buy it how ?
Ok here is his email , contact him he can get you what you need for you XTS
e4life82@wowway.com
wonder if this can be done to the 2011 cts
No , they don’t have a option for your car for that year
U think my srx can do this
I’m not sure
Is this cluster you bought also a 14’ cluster? Cause I have 2014 V Sport I wanna do this too. Will it work with any cluster?
You need a cluster from a 2014-2015 CTS premium . I have the part number on the description as stated on the video .
PRviewsvlogs you’re bad ass bro. I been trying to do that to the V Sport since I got it a year ago but why pay $10,000 more for it on the premium when you can install it yourself for like 700$. Good man
Thanks bro yea just follow the steps in the video , see if you can find a used on on eBay
PRviewsvlogs I have no luck on eBay for it, been looking for it. I’m going to have to buy it new of gm parts direct for like 600$ cause it’s 35% percent off. Goes for 935$ on the reg
Yea a then contact my guy and he will program it for $250
I want 1 for my 2016 cts
I have a 2016 xts luxury will that work for my car and can you change the cluster designs
You can contact blac_laquer and as him
Whats his phone number or email
Hayward Edmond hit him up on IG
Ok Thanks
How do you get rid of the black bar at the top on the map screen when the buttons fade away
I have a 2.0t 2016 Where can I buy the gauge cluster screen I can’t find it on ebay
Try www.GMdiscountparts.com and use the part number in the description .
Yoo did you ever figure out how to Match miles up??
Yes , if you watch the entire video when I drive it I say how it works
Any update on the HUD?
Not yet
Can this be done on a ATS??
Yes but it takes some modifications of the dash and the gauges , not sure exactly what’s involved
Can this fit my 2016 xts?
No you would need gauges for a XTS
How much is it?
Watch the video I explain in the video
Lol he big mad
@@subconsciouslyinyahead7977 he big mad ? Is that English ??
Is this compatible with a 2018 ATS?
Unfortunately no . Even the 2018 CTS isn’t compatible with this
PRviewsvlogs oh ok. I’ll have to call around and see if anyone makes one for the’18 model
Contact black lacquer , and see if he can program them , I know that one person fit them in his ATS but it was a 2015 and he had to cut some part of the dash to fit it properly
PRviewsvlogs man thank you so much for the help and input, I’ll for sure hit him up. I’ll let ya know what he says
PRviewsvlogs man you wouldn’t believe how many black lacquer’s are on instagram 😂🤔
Hey bro I got a question about that mod I have a 13 XTS and I bought a 14 Platinum XTS is currently in my vehicle and it's getting a lot of errors on things that are not on my car will this cause a problem to the actual operation of the vehicle long-term?
I don’t get the question , you have a 13 XTS and you a 14 XTS gauge ? Or car not sure what your trying to say , but if you didn’t program the gauges to the car yes you will have errors will it cause problems probably not cause it’s just showing errors cause it can find the sensor for things that are not there , but you shouldn’t have this issue if you had someone program the gauges to your vin
There no miles in the dash. If you install used speedometr you will see just -------- , when you write vin inside speedometr you will see you real miles. Miles in BCM, not in IPC
The miles came up after watch the entire video
I have a 2014 CTS 3.6 non turbo. Can I get these gauges for it? If so what is the part number? Thank you so much.
Part number is in the description and yes
PRviewsvlogs thx for all the help. I guess I’m just not seeing the part number? You said it’s in the description where about so is it at? Thank you.
PRviewsvlogs I found it. Thx.
OR YOU COULD JUST BUY THE VSPORT PREMIUM THAT HAS ALL THAT AND H U D
So trade my car in and go purchase a higher priced car for thousands more , where this cost me less then $1000 to do , yea seems reasonable
I would honestly watch more of your videos and I would subscribe but honestly you waste way too much time talking about stuff that has nothing to do with the video and no one wants to see you bro I'd rather just see the car and the process
Thanks for the view , and it’s called a Vlog Hense the name of the channel , can’t make everyone happy , have a great day
Way too much talking
Next time just move to the next video , I’m sure there is tons of videos with this install .