Hi everyone! I've done a random drawing for those of you who followed instructions to win the VSport carbon fiber license plate frame. The winner is Bluemar! If you want to watch my livestream of the drawing you can check it out here: ruclips.net/video/wxhlbQC-cBE/видео.html You will have an opportunity to win the second plate frame in a future video, so keep watching!
I did this install today and whIle it wasn't the easiest mod I've done, I was still able to get it done with Lee's guidance. There are currently No videos showing an install to a ct4 (or videos showing any mods install on ct4), so this one is the closest you'll get. I'd say it's about 85% the same. A couple notable differences and I'll list them below. 1. On the A pillar, you'll need to remove a 7mm bolt securing a tether to the trim. 2. To the sides of the center high mount stop light are round plastic clips that will pop if you apply pressure downwards. I was lazy and did not undo the drivers side c pillar. But if would have given me more room to work with without having to worry about creasing/folding 5he headliner. Probably would have made the install a lil faster too. It took me doing it by myself about 5 hours and that's including the time I went to Lowe's to buy a small ratchet so I can get it in between the headliner to take off the 10mm bolt to the fin. I love this mod as I have very dark rear tint which I can barely see out at night drove around just now and live being able to see what's behind me. When I was finally finished with the install I noticed there was a small gap of maybe 1mm between the new fin antenna and the actual roof of my car. I check with Lee to see if this is Normal and Was told it is and it would be fine as long as I tightened dOwn the bracket below. Which I tightened snug til it won't go any further. Theres foam that should keep water out. Keeping my fingers crossed that it won't leak. I hear others about how their eye can't adjust to video quickly or something ? I did notice that when I needed to look at the video mirror bUt it only takes a second for your eyes to focus in on the image and it's really not a big deal for me. Big Thanks to Lee of Alphamods for his guidance during my installation couldn't of done this without you!
OMG, this is what I need. I tell everyone this is one of my favorite options on my Ct6 blackwing and something I wanted in my old v sport. Now make a video on how to add it to my 2018 ram. Thanks alpha mods
I have the stock rear view mirror camera on my 2017 CTS which came as an option add-on. In reality at night it is virtually worthless due to the glare of the headlights behind you. During the day it does provide a much wider field of view!!!! Great Video..!!!!! You do such a good job with all your work...!!!
thanks Alpha mods. The camera mirror upgrade looks great, And I know they work well as I have the GM one in my CT6-V. Another super video by Jet Fuel Only
Some of the vehicles Jet Fuel works on are significantly easier to disassemble than vehicles that have not been taken apart. At 5:00 that lower clamshell will not pull apart even with great force unless you bend the shell with both hands to disengage one of the retaining latches. At 5:15 that "Y" shaped plastic piece is impossible to pull out by hand because it's retained by a unbendable metal mirror tab. To get it to pop out, you need to come in through the side at the tip of the "Y" with a spudger or non-marring screwdriver and twist at the gap (note: you're not spreading the "Y" you're forcing the plastic piece to separate from the mirror along the slide rail). Additionally, there is no point in putting the plastic piece back because the newer mirror does not have a tab to retain it. At 5:40 the mirror does not come right out--you'll have to twist, alternating clockwise / counterclockwise while applying steady pressure to coax it toward the top of the roofline. After 6-10 cycles it should start moving--attempting to pull it straight out will not budge it. Finally, all wires should be wrapped with Tesa 51608 tape to avoid rattling.
Thanks for the video. As an owner of a 2018 CTS-V, I love the OEM digital rear view mirror. I'd be very interested in watching a video on installing Alpha Mods' folding power mirrors, so I hope you can make one. It's strange the CTS-V had this feature in Europe, but not in North America. Keep up the great work, I enjoy your channel.
I have this, not your kit; but the mirror itself. One thing you lose is the depth perception of a real mirror. However; if you have to bring balloons in your car for a party or have passengers in the rear, it works really well. Also in dark areas where you are just trying to backup. edit: Just so I am clear the digital mirror can also be a normal one. You get the best of both worlds. I was only saying I prefer my normal mirror most of the time.
Hey man; great video and in future I’m looking to add this to my car; i have a question for you; i don’t have front sensors (base cts) can i add them (original) and plug them so they work with my cue system? Without additional wiring. Wonder if there is already plugs somewhere just to add them
Usually manufacturers have different harnesses for different optioned cars. Not sure if you could just buy the appropriate wiring harness and the main terminal may be the same. However, then you get to find out if the BCM has an issue because it’s not part of THAT VINs programming. So I’m not sure. I think you could do better by just adding a front camera to actually see the objects. Checkout Navtool.com for interfaces that allow you to add extra cameras.
You will need to contact Aloha mods about that. The actual antenna connection is separate so I doubt it would be any issue. The antenna needs to be installed obviously but the xm plug can likely be disconnected
It cannot. The reason is your camera for the mirror is in the rear appliqué by your backup cam. They changed it to the fin camera. An upgrade for you would require changing the appliqué to a single cam setup AND buy the new kit. Good news is you could sell your old stuff and probably get $400-500
Hey everyone, thanks for watching! I’ll pick the winner after we get 100 likes. By the way I want to say this mirror is really slick. What I love it that it’s an OEM product. This isn’t a cheap add on mirror with an stick on camera from Ali express, it’s a Genuine Cadillac part from the mirror to the camera and antenna. That’s the type of mod your Cadillac deserves!
Congrats Bluemar! You won the plate frame. Please get in touch with me via email. You can find the address in the video during the conclusion (too many scammers out there to post it here publicly).,
Appreciate it... This video really comes in handy, as I have to replace sun shade, tighten bolts for sun roof creak, and now add this rear view mirror... 😂
Hi everyone! I've done a random drawing for those of you who followed instructions to win the VSport carbon fiber license plate frame. The winner is Bluemar! If you want to watch my livestream of the drawing you can check it out here: ruclips.net/video/wxhlbQC-cBE/видео.html
You will have an opportunity to win the second plate frame in a future video, so keep watching!
Thanks alpha mods
I did this install today and whIle it wasn't the easiest mod I've done, I was still able to get it done with Lee's guidance.
There are currently No videos showing an install to a ct4 (or videos showing any mods install on ct4), so this one is the closest you'll get. I'd say it's about 85% the same.
A couple notable differences and I'll list them below.
1. On the A pillar, you'll need to remove a 7mm bolt securing a tether to the trim.
2. To the sides of the center high mount stop light are round plastic clips that will pop if you apply pressure downwards.
I was lazy and did not undo the drivers side c pillar. But if would have given me more room to work with without having to worry about creasing/folding 5he headliner. Probably would have made the install a lil faster too.
It took me doing it by myself about 5 hours and that's including the time I went to Lowe's to buy a small ratchet so I can get it in between the headliner to take off the 10mm bolt to the fin.
I love this mod as I have very dark rear tint which I can barely see out at night drove around just now and live being able to see what's behind me.
When I was finally finished with the install I noticed there was a small gap of maybe 1mm between the new fin antenna and the actual roof of my car. I check with Lee to see if this is Normal and Was told it is and it would be fine as long as I tightened dOwn the bracket below. Which I tightened snug til it won't go any further. Theres foam that should keep water out. Keeping my fingers crossed that it won't leak.
I hear others about how their eye can't adjust to video quickly or something ? I did notice that when I needed to look at the video mirror bUt it only takes a second for your eyes to focus in on the image and it's really not a big deal for me.
Big Thanks to Lee of Alphamods for his guidance during my installation couldn't of done this without you!
Definitely great mod makes me feel like I’m driving a 2022 now 💪🏽🙏🏽
Oh yeah ,Thanks Alpha Mods!
I have many products from alphamods and it really is a one stop shop for unique and factory upgrades. The support and quality is top notch
Thanks Alpha mods
Can't wait to install this mirror/camera in my xts v sport platinum
Thanks Alpha Mods
I really enjoyed seeing what it takes to do this mod, it is on my list, along with tightening those sunroof bolts...
Fo sho!
Thanks just picked up a 2021 CT5, gonna do this upgrade for sure
OMG, this is what I need. I tell everyone this is one of my favorite options on my Ct6 blackwing and something I wanted in my old v sport. Now make a video on how to add it to my 2018 ram. Thanks alpha mods
I have the stock rear view mirror camera on my 2017 CTS which came as an option add-on. In reality at night it is virtually worthless due to the glare of the headlights behind you. During the day it does provide a much wider field of view!!!! Great Video..!!!!! You do such a good job with all your work...!!!
Yours has a camera on the trunk, I’ll have to ask the owner but having it higher up in the antenna may reduce glare. Thanks for the comments!
The garage is coming together nicely!
Thanks
Thanks Alpha Mods
Thank you Stalcup. I do want that plate frame. I haven't seen past the intro yet, but it would be a fine addition to my 14 Vsport
Thanks Alpha Mods. New to the V-Sport looking forward to learning more about this sweet ride!
thanks Alpha mods. The camera mirror upgrade looks great, And I know they work well as I have the GM one in my CT6-V. Another super video by Jet Fuel Only
Thanks Alpha mod for nice pcs and thanks to jet fuel to let us all about Cadillac CTS v upgrade
Thanks Alpha Mods! Thank you my boy Daniel for always with the good ass videos
"Thanks Alpha Mods"
Thanks Alpha Mods and thank you Daniel
Some of the vehicles Jet Fuel works on are significantly easier to disassemble than vehicles that have not been taken apart. At 5:00 that lower clamshell will not pull apart even with great force unless you bend the shell with both hands to disengage one of the retaining latches. At 5:15 that "Y" shaped plastic piece is impossible to pull out by hand because it's retained by a unbendable metal mirror tab. To get it to pop out, you need to come in through the side at the tip of the "Y" with a spudger or non-marring screwdriver and twist at the gap (note: you're not spreading the "Y" you're forcing the plastic piece to separate from the mirror along the slide rail). Additionally, there is no point in putting the plastic piece back because the newer mirror does not have a tab to retain it. At 5:40 the mirror does not come right out--you'll have to twist, alternating clockwise / counterclockwise while applying steady pressure to coax it toward the top of the roofline. After 6-10 cycles it should start moving--attempting to pull it straight out will not budge it. Finally, all wires should be wrapped with Tesa 51608 tape to avoid rattling.
Thanks alpha mods
Thanks Alpha Mods!
Ahh man…I need to do this for my Blackwing!
Another great video from the VS GOAT!
Thanks!
Thanks for the video. As an owner of a 2018 CTS-V, I love the OEM digital rear view mirror. I'd be very interested in watching a video on installing Alpha Mods' folding power mirrors, so I hope you can make one. It's strange the CTS-V had this feature in Europe, but not in North America. Keep up the great work, I enjoy your channel.
Just had confirmation, I will be doing a video on it - probably release in August.
@@JetFuelOnly Awesome! Looking forward to the video!!
Little delay on it but maybe September now.
I have it on my ats. It's definitely a great feature
@@JetFuelOnly Still hoping you do the install/review on the folding mirrors!!
Great video Daniel!
Thanks alphamods
I have this, not your kit; but the mirror itself. One thing you lose is the depth perception of a real mirror. However; if you have to bring balloons in your car for a party or have passengers in the rear, it works really well. Also in dark areas where you are just trying to backup.
edit: Just so I am clear the digital mirror can also be a normal one. You get the best of both worlds. I was only saying I prefer my normal mirror most of the time.
Oh nice, I got a shout out lol
Thanks for all the videos Daniel, where can I get a T-shirt like the one your wearing?
Send a message on IG to this guy. Not sure he’s still making them. instagram.com/chilacxn?igshid=MzRlODBiNWFlZA==
Wish they had it for a 2012 Escalade
Thanks Alpha modes...
Thanks for watching! The winner has already been selected.
Love your videos.
My mirror is starting to sag so this might be the option I go with when I replace it
SICK!!!!!
" Thanks Alpha Mods"
What about adding a front camera?
I don’t think there’s an OEM way to add a front camera. However you can order devices from places like Navtool and you can add cameras.
Where can I find this for my gmc my truck didn’t come with it and I have a Denali
You can email Alpha Mods. They may have a solution for you.
Thanks alpha mods!!!
日本でも買える？
2015CTSで使いたい
JUST CURIOUS. DOES THIS WORK ON THE CT6 SEDAN?
Yes I believe so! Contact alpha mods in the description.
Hey man; great video and in future I’m looking to add this to my car; i have a question for you; i don’t have front sensors (base cts) can i add them (original) and plug them so they work with my cue system? Without additional wiring. Wonder if there is already plugs somewhere just to add them
Usually manufacturers have different harnesses for different optioned cars. Not sure if you could just buy the appropriate wiring harness and the main terminal may be the same. However, then you get to find out if the BCM has an issue because it’s not part of THAT VINs programming. So I’m not sure. I think you could do better by just adding a front camera to actually see the objects. Checkout Navtool.com for interfaces that allow you to add extra cameras.
@@JetFuelOnly thank you for replying and advice! Will look i to that;
Any chance you have link for rear view camera (i saw your video)
Here’s the link to the interface that adds cameras. Is that what you wanted?
www.navtool.com/cadillac-cts-2014-2017-hdmi-interface.aspx
Can I add it to my Cadillac 2017 xt5 base modal
Please contact AlphaMods about fitment.
Will this work without antenna connected?
You will need to contact Aloha mods about that.
The actual antenna connection is separate so I doubt it would be any issue. The antenna needs to be installed obviously but the xm plug can likely be disconnected
Where can I get that tshirt?
Contact @chilacxn on IG!
I take it this one does not record/act as a dash cam?
No it doesn’t
What about for a 2015 Escalade? Later years have the option could I just swap it with a later model?
Contact Alpha Mods. They will know!
Tell them I sent you
Will this work with the Cadillac ELR?
Contact alpha mods to be sure but it likely will work
Will this work on 2013 XTS?
Please contact Alpha mods for compatibility
Do it fit in a Cadillac cts 2008 car tho?
Nah. Sorry bro 🙁
My VSport has the 1st gen video mirror. Do you know if this mirror can just be added to a 1st system?
It cannot. The reason is your camera for the mirror is in the rear appliqué by your backup cam. They changed it to the fin camera. An upgrade for you would require changing the appliqué to a single cam setup AND buy the new kit. Good news is you could sell your old stuff and probably get $400-500
Nice video Danial. Thanks Alpha Mods.
Hey everyone, thanks for watching! I’ll pick the winner after we get 100 likes.
By the way I want to say this mirror is really slick. What I love it that it’s an OEM product. This isn’t a cheap add on mirror with an stick on camera from Ali express, it’s a Genuine Cadillac part from the mirror to the camera and antenna. That’s the type of mod your Cadillac deserves!
Thanks Alpha Mods!!! Don’t forget to use the promo code “JETFUEL” for the free shipping fellow Cadi owners !
Thanks Alpha Mods
Congrats Bluemar! You won the plate frame. Please get in touch with me via email. You can find the address in the video during the conclusion (too many scammers out there to post it here publicly).,
@@JetFuelOnly Woot woot awesome I be sending u the info Ty so Much
"Thanks Alpha Mods"
Thanks alpha mods
Can I get one please I got a Cadillac eldorado 93
This setup isn’t available for older Models. There are many on Amazon though but will require different installation steps
Thanks Alpha Mods
Thanks Alpha Mods
Thanks Alpha Mods
Thanks Alpha Mods and thank you Daniel! Helped me through a lot!
I Don’t own a Cadillac…… yet, but really enjoy your content. Keep up the great videos.
Aw thanks!
Another great video, thanks brother!
Thanks Alpha Mods
Thanks alpha mods
Appreciate it... This video really comes in handy, as I have to replace sun shade, tighten bolts for sun roof creak, and now add this rear view mirror... 😂
Yeah I think it helps you get there. You might need to drop the roof console and the visors though
@@JetFuelOnly true
Thanks alpha mods 💯
🌈 p̶r̶o̶m̶o̶s̶m̶