Husqvarna Riding Mower Oil Change (Easy!)

Поделиться
HTML-код
  • Опубликовано: 10 окт 2021
  • Amazon Affiliate Link(s):
    Briggs & Stratton Oil Filter: amzn.to/3tvzUcA
    Strap wrench: amzn.to/3AePAVi
    Flathead screwdriver: amzn.to/3AitVeW
    Disclaimer:
    I am not an expert, just an average Joe who enjoys DIY'ing. Learn, Save, DIY assumes no liability for property damage or injury incurred as a result of any of the info from this video. Use this information at your own risk. Due to factors beyond the control of Learn, Save, DIY, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Learn, Save, DIY.
  • Авто/МотоАвто/Мото

Комментарии • 12

  • @chucksmith1236
    @chucksmith1236 17 дней назад

    Putting the oil on the rubber ring helps it seal. Nice video!

  • @buddyandrade335
    @buddyandrade335 Год назад +3

    After adding the new oil run the mower a few minutes then recheck the Oil level again as the new Oil filter will take up some of the oil that you added

  • @DC-qz7zj
    @DC-qz7zj 2 месяца назад

    Thanks for the video. The foil tip worked great!

  • @elmersparks1744
    @elmersparks1744 2 месяца назад

    It is almost beyond belief that competent engineers could not engineer a simple process to drain oil and avoid all the mess and unnecessary complexity associated with this process!

    • @learnsavediy
      @learnsavediy  Месяц назад +1

      I agree. We’ve been replacing oil in engines for years, why do we need to make them harder?

  • @anguslean4058
    @anguslean4058 Месяц назад +1

    Those drain plugs suck
    I have the same model and mine came loose
    Thank God I was an doing an oil change
    When I drained it only a half of a quart came out
    The thing was leaking oil when I was using it because of the loose drain plug
    If I hadn’t change the oil at that time I might have seized the engine.
    I am replacing their piece of garbage with a modified and much sturdier drain plug.
    There are videos on here on how to do it.

    • @learnsavediy
      @learnsavediy  Месяц назад

      I feel like we as a society (especially the engineers designing these machines) should have perfected the oil change drain plug. I guess we'll need to keep holding our breaths.

  • @frankyvee1
    @frankyvee1 4 месяца назад

    It takes 2 quarts. Nice tip with the foil.