I have been doing A/V integration for 10 years now and now diving into commissioning. This was a great tutorial to help build my first program plus help with troubleshooting. Thank you
Fantastic video… ive done Control4 and Savant for a bit now and ive taken an interest in how Crestron operates and getting my hands on the system. I have 0 experiense with Crestron but this video made it seem simple. Im sure its more complicated but this seem so simple.
im just now involve in the AV work. can you help me about my problem in the touch panel of crestron. its not functioning even the on /off button. thank you
Can you apply VT-Pro-e with this? You've shown me one side to a double sided coin. How Do I create and GUI like you have in VT Pro-e for these buttons and feed
Thanks for the good tutorials. One mistake I noticed in the audion in this one is at @12:04 you say "incompatible symbols" but it's really "incomplete symbols" that Simpl is complaining about. Minor for sure... Thanks again though and keep making videos please.
Hi.. would it be possible for you to make a video on how to add volume gauge and get it working so when press button or use finger then gauge goes up and down.. just have bit of trouble getting the gauge working.. getting stuck at touch analog feedback join.. thanks..
Awesome Video! However when I download the X panel and it doesn't download it in a zip file and my computer gives me a microsoft .netframwork error. Which version of .netframwork do I need to view the xpanel? Thanks!
Hi, I have a crestron MT-1000C programmed years ago by the installer but now I want to replace the device because the touchscreen is not working and someone is selling me one that works. Is there a way to save the current program of my device and transfer it to the new one? Thanks!
hi great tutorial. Can you tell me where can i find X-Panel. if im creating my program and want to see it .. i know in your video you asked us to download but if we dont want to download how can we see X-Panel.exe file thank you
How do i search Input or output in SIMPL program? for e.g if i want to search Sony_DVD_Vol_up, how can i find it? I do see "Search and Replace" but it is for replacement not for search only.
hi sir, I'm a beginner in the field of crestron processor programming. I just want to know how to turn on/off a led by using a RMC3 processor, dimmer, hz-kpcn and a led (how to do it with SIMPL )
hello I have reviewed and the tutorials are very good, I want to download the programs, but it tells me that the page does not exist, please where can I get them, thanks.
Are the things stated in this video similar to what is discussed in SIMPL Primer? I hate trying to follow a 70 page written out form, videos are way better as you can easily visualize. Let me know!
Are you talking about the touch panel project? If so, to get it to compile to an exe you need the panel type to be XPanel (non-smart graphics) and the target under project properties -> compile -> Target (halfway down) should be Executable - PC If you put in your email on the subscribe page in the video notes you will get the example files for this project sent to you right away. -Dustin
I think I know what you mean - the video shows you how to build the project in SIMPL Windows but what it doesn't show is the XPanel creation in Vision Tools Pro-e Each project has a SIMPL program that loads to the processor, and a touch panel that usually gets loaded to a panel. These are created in two seperate applications. In this case, the video is showing an XPanel and that was created without showing you how it was done specifically, Jonathan just had a link to download it. I've recreated that, you can go here to signup and it shoud be emailed to you automatically go.proavschool.com/owl In the future I should probably make a video on how this example touch panel file is created.
the processor type is not the problem but it is useful to note that a 2 series processor will compile from SIMPL into an .spz file while a 3 and 4 series processor will compile into an .lpz file. The "load program" dialog takes care of that for you but at some point you probably want to know a bit more about what the file types are.
Hi, just found this video as I was stuck programming an RMC3. It was such a massive help, thank you for making this. I have a question though and maybe you can help. I’ve got an RMC3 which I’m programming for a conference room and Crestron have told me that it can be controlled by the MX-150-T with the Flex UC engine. Now I can see this under the library when adding devices, it’s under Audio/Video communication. When viewing this though in the panel I can’t see how it works are there are no switches. Can you help? Thanks
If you are still looking for an example project step by step, you can check out a 7 day free trial to the ProAVSchool Hub - proavschool.com Specifically inside the hub there is a course called the "Crestron Basics Bootcamp" that goes through creating a project from start to finish along with downloadable examples. You can go through as much of the course as you want (and other courses as well) during the trial. -Dustin (I run ProAVSchool and took over this channel from Jonathan as he is no longer in the Crestron programming space)
There is a link in the comments - if you sign up you will get the files for this demo program sent to you right away, feel free to unsubscribe at any time we don't send any useless spam.
When I tried to compile I got a "There are incomplete symbols in this program." error message. Any ideas about why that would happen? Programming an MPS-200.
I have created a file called Getting Started.xexe, inside this file i put Xpanel and made a bin file also. iside the bin file i have downloaded all the files from your link in your bin file to my bin file. So now finaly i can open the xpanel, but now i can't connect, I have changed the ip so the xpanel point to the controller. but still no luck, do i need to add an entry in the ip table of the controller?
Crestron SIMPL Windows and Vision Tools Pro-e are unfortunately only available to Crestron dealers and authorized partners. This does makes it hard to dabble in and play around when you are getting started - which may or may not be the actual intention.
How do you generate a custom Xpanel, matched to a prject file in VT-Pro e? I did it in the on site training but for the life of me I cannot remember how :p
when i go to compile to my cp2e i get an error saying "the device does not support the capabilities rquired by this dialog" after hours of researching i cant figure it out. Any ideas? BTW Great Videos!!!
If you're looking to get Crestron in your home I recommend bringing an integrator into the mix. If you're into DIY there are other options from Apple, Google, etc.
Good video, but with no example to understand the meanings of symbols, functions all it can be unusable. Give us please un real example so it can be full understandable.
Hi.. would it be possible for you to make a video on how to add volume gauge and get it working so when press button or use finger then gauge goes up and down.. just have bit of trouble getting the gauge working.. getting stuck at touch analog feedback join.. thanks..
Excellent! an entire day or more of Crestron training in 15 minutes😀
I have been doing A/V integration for 10 years now and now diving into commissioning. This was a great tutorial to help build my first program plus help with troubleshooting. Thank you
Recently completed the foundation course and this video was better. Thank you!
We are just "Getting Started" and have plans to eventually go as far as the Crestron programming code can take us. :)
Hi, can I know how to download a program crestron SIMPL Windows v2
Thank you
While I'm now a more advanced novice, I wish I had videos like this when I was starting out. It would have saved me DAYS.
Keep up the great work!
It's been a minute since I needed to program and this a great refresher for me. Thanks..
Very well done for getting started. Looking forward to more videos!
Amazing, this is my first time and I really enjoyed watching this tutorial. This guy is extra ordinary talented and knows how to teach .
Thanks very much. Headed to Crestron Programming school in two weeks!
Fantastic video… ive done Control4 and Savant for a bit now and ive taken an interest in how Crestron operates and getting my hands on the system. I have 0 experiense with Crestron but this video made it seem simple. Im sure its more complicated but this seem so simple.
THANK YOU
im just now involve in the AV work. can you help me about my problem in the touch panel of crestron. its not functioning even the on /off button. thank you
Can you apply VT-Pro-e with this? You've shown me one side to a double sided coin.
How Do I create and GUI like you have in VT Pro-e
for these buttons and feed
I am also subscribed to Brett's channel as well for a while now.
I think the download link has been compromised? It is triggering antivirus software downloads etc
Love the videos! Thanks for making them.
What version of Simpl windows is required for processor cp3
How can I get the softwares? In crestron website I need to be a seller.
Thank you. Well explained for a n00b like me. 🙌👊🏼
hi ! Need help. My Crestron have two panels. iphone and ipad. Can I use same signals for two panels ? I use ports 41790 for iphone and 41792 for ipad.
can you update the project link please?
i cant compile the program, im using a Lenovo IdeaPad flex 6, can i get help with that. i did save the file.
Hey, I can't download the XPanel project.
Thanks for the good tutorials. One mistake I noticed in the audion in this one is at @12:04 you say "incompatible symbols" but it's really "incomplete symbols" that Simpl is complaining about. Minor for sure... Thanks again though and keep making videos please.
Hi.. would it be possible for you to make a video on how to add volume gauge and get it working so when press button or use finger then gauge goes up and down.. just have bit of trouble getting the gauge working.. getting stuck at touch analog feedback join.. thanks..
Awesome Video! However when I download the X panel and it doesn't download it in a zip file and my computer gives me a microsoft .netframwork error. Which version of .netframwork do I need to view the xpanel? Thanks!
Hi, I have a crestron MT-1000C programmed years ago by the installer but now I want to replace the device because the touchscreen is not working and someone is selling me one that works. Is there a way to save the current program of my device and transfer it to the new one? Thanks!
hi great tutorial. Can you tell me where can i find X-Panel. if im creating my program and want to see it .. i know in your video you asked us to download but if we dont want to download how can we see X-Panel.exe file thank you
how can i get the Project file to download
I finally had some time to get the example project for this video uploaded to the OWL library - signup here (free):
go.proavschool.com/owl
@@OverWorkedLogic This link is not working.
quick question when i press the program button AKA BUG button i don't get the symbol library only have detail and program view not sure why?
10-13-19 - Project Download file not available. Server Connection error. Can't you send an updated url link to the project file? Thanks, Brett
Hi, can you show me where I can download the program SIMPL Windows crestron , thank you ..
The link for the project is broken :(
How do i search Input or output in SIMPL program? for e.g if i want to search Sony_DVD_Vol_up, how can i find it? I do see "Search and Replace" but it is for replacement not for search only.
hi sir, I'm a beginner in the field of crestron processor programming. I just want to know how to turn on/off a led by using a RMC3 processor, dimmer, hz-kpcn and a led (how to do it with SIMPL )
This is great!
Although the VT-Pro E part is the other half to this equation that you didn't teach us
Excellent Video! but, how can I get the SIMPL Windows software if I got a PRO2 bought at Ebay
hello I have reviewed and the tutorials are very good, I want to download the programs, but it tells me that the page does not exist, please where can I get them, thanks.
SO which prossecor ı need to buy
Are the things stated in this video similar to what is discussed in SIMPL Primer? I hate trying to follow a 70 page written out form, videos are way better as you can easily visualize. Let me know!
Who has the programming link, because I couldn’t download it
hi, when i compile the project, i don't see the exe file, what can be the cause, I really appreciate your help, and thanks for the videos.
Are you talking about the touch panel project?
If so, to get it to compile to an exe you need the panel type to be XPanel (non-smart graphics) and the target under project properties -> compile -> Target (halfway down) should be Executable - PC
If you put in your email on the subscribe page in the video notes you will get the example files for this project sent to you right away.
-Dustin
@@OverWorkedLogic i'm trying to follow the video, and when compile, i dont see the xpanel interface.
@@OverWorkedLogic i'm using a pro2, could be that, im new in this world
I think I know what you mean - the video shows you how to build the project in SIMPL Windows but what it doesn't show is the XPanel creation in Vision Tools Pro-e
Each project has a SIMPL program that loads to the processor, and a touch panel that usually gets loaded to a panel. These are created in two seperate applications.
In this case, the video is showing an XPanel and that was created without showing you how it was done specifically, Jonathan just had a link to download it.
I've recreated that, you can go here to signup and it shoud be emailed to you automatically go.proavschool.com/owl
In the future I should probably make a video on how this example touch panel file is created.
the processor type is not the problem but it is useful to note that a 2 series processor will compile from SIMPL into an .spz file while a 3 and 4 series processor will compile into an .lpz file. The "load program" dialog takes care of that for you but at some point you probably want to know a bit more about what the file types are.
Hi, just found this video as I was stuck programming an RMC3. It was such a massive help, thank you for making this. I have a question though and maybe you can help. I’ve got an RMC3 which I’m programming for a conference room and Crestron have told me that it can be controlled by the MX-150-T with the Flex UC engine. Now I can see this under the library when adding devices, it’s under Audio/Video communication. When viewing this though in the panel I can’t see how it works are there are no switches. Can you help? Thanks
Hopefully you can make a project step by step since the beggining and you show us how you program it. 🙏
If you are still looking for an example project step by step, you can check out a 7 day free trial to the ProAVSchool Hub - proavschool.com
Specifically inside the hub there is a course called the "Crestron Basics Bootcamp" that goes through creating a project from start to finish along with downloadable examples. You can go through as much of the course as you want (and other courses as well) during the trial.
-Dustin (I run ProAVSchool and took over this channel from Jonathan as he is no longer in the Crestron programming space)
Why not move the project files to github?
I keep getting a .NET unhandled exception error when I tried to run the Xpanel.exe. Any help on this?
WONDERFUL LOVE IT PLEASE SHOW MORE 150%
how can i start crestron programming
anyone have the source file? just want to learn it.
do somebody have the touch panel screen software link
There is a link in the comments - if you sign up you will get the files for this demo program sent to you right away, feel free to unsubscribe at any time we don't send any useless spam.
When I tried to compile I got a "There are incomplete symbols in this program." error message. Any ideas about why that would happen? Programming an MPS-200.
It should tell you which symbols are incomplete when you get the error, double-click the symbol in the error list, hit ctrl+i and see what happens
I have created a file called Getting Started.xexe, inside this file i put Xpanel and made a bin file also. iside the bin file i have downloaded all the files from your link in your bin file to my bin file. So now finaly i can open the xpanel, but now i can't connect, I have changed the ip so the xpanel point to the controller. but still no luck, do i need to add an entry in the ip table of the controller?
The IP table should auto-populate once you load the program onto the processor. Were you able to get the program loaded?
Hello where can I get a copy of Simpl?
David Joncheff download master installer from Crestron.com
@@0121doone except, you can't just download it...you need to become a partner...
@@0121doone it doesn’t work - can you provide a direct link?
@@reeddeer793 no
How do I download SIMPl?
I cannot download the x-panel file
how do i get the software
Crestron SIMPL Windows and Vision Tools Pro-e are unfortunately only available to Crestron dealers and authorized partners. This does makes it hard to dabble in and play around when you are getting started - which may or may not be the actual intention.
How do you generate a custom Xpanel, matched to a prject file in VT-Pro e? I did it in the on site training but for the life of me I cannot remember how :p
Just worked it out. If anybody needs a tip give me a PM
@@kiopl2003 hi, could ou share your Xpanel file to match with this Simpl program?
somebody have project to send to me or download link?
you can get them at owl.proavschool.com
You're a life saver. ;-)
when i go to compile to my cp2e i get an error saying "the device does not support the capabilities rquired by this dialog" after hours of researching i cant figure it out. Any ideas? BTW Great Videos!!!
check for latest firmware, and simpl windows software maybe?
How can get SIMPL WINDOWS software, I can not download it.
It's on the Crestron website, just look it up here - www.crestron.com/Support
@@fantasyland07 it needs login - can you send it to me I can pay
thanks very much
can you put the link to buy cheap Crestron processor
ebay :)
Good intro vid....
👍 big like
I like this, But over my head. I am looking to get Crestron in my home, Go from there. Thanks
If you're looking to get Crestron in your home I recommend bringing an integrator into the mix. If you're into DIY there are other options from Apple, Google, etc.
What happened to this dude… hope he is ok
can some one help me I need to update my Crestron software how I can ?
use the master installer
Good video, but with no example to understand the meanings of symbols, functions all it can be unusable. Give us please un real example so it can be full understandable.
the background music in all your videos make it unbearable to listen to- unsubscribing
Hi.. would it be possible for you to make a video on how to add volume gauge and get it working so when press button or use finger then gauge goes up and down.. just have bit of trouble getting the gauge working.. getting stuck at touch analog feedback join.. thanks..