You know the best things about your videos is that you list the links and the descriptions to help others with builds & ideas I have went through multiple channels for help and for ideas and your channel is A1 never met you man wish I can you’re cool and thanks for the help
Dude, I appreciate you🙏 thank you for commenting and watching. If you ever have questions about a build just drop here like you did and I’ll get back to you 🤜🤛
Hey, i was wondering which swingarm to buy as there is a more expensive one and a cheaper one, I've been reading and don't understand what the difference is
Your view on hub vs mid drive motors? I absolutely hate chains so I've installed 3000w 14" rear hub motor on my mx500 and love it. I also installed 5000w 12" hub motor on my pocket mod. I don't see many videos of razors with hub motors. 🤷🏾♂️
Hey great video thanks for sharing the gear ratio with us all. Is that ratio your standard ratio across different models. Can you give me an approximate min max for ratios. Thanks for your time. appreciate you greatly.
I have the same setup on my Razor but my motor has a stutter at low speed when I roll off of the throttle. My regen is set to zero but it still has this issue. Have you experienced this problem?
@@VoltronWatts I did, I followed the instructions that were included from E&C. I did a test today with my E&C my1020 motor and the issue stopped. Obviously an issue with my EC4P, thanks for the response.
Sorry for a similar question just want to verify before I purchase..I ordered 72v 32ah 200amp discharge from hotpaxx..can I run little bit controller as long as I input my battery info properly? Thanks
Sorry for a similar question just want to verify before I purchase..I ordered 72v 32ah 200amp discharge from hotpaxx..can I run little bit controller as long as I input my battery info properly? Thanks
Hey voltron I was so exited when I got the little bit in the mail and when I hooked everything up the volt meter was saying 81 volts and full but the app was throwing up a error code 2 saying the volts is too low what should I do. I’m so bummed I was so exited to ride it
I bought the ec4p lite and emailed the company but they still haven’t got back to me I wonder if it’s a motor problem or a controller problem or battery issue
ay man i bought a full mx650 build from someone for 1400$ it has the full kit with the noisey cricket ec4p and a 76 24ah battery with the e&c extensions. but the motor is making a super loud noise when the chain is on and it won’t spin the rear wheel at all and idk if e&c would do anything since i didn’t buy everything from them
do you prefer the Midwest swing arms or the sotion one I’m wanting to go with this little bit set up but I’d really like the sotion swing arm boss what’s your opinion
@@VoltronWatts I thought I seen a video of one of your builds with a sotion swing arm dang was hoping for good feed back on the sotion kit as it comes with a wheel
@@VoltronWatts ohhh I get you boss sweet okay I’ll go with the sotion swing arm boss on the side note your video is steering me into the little bit kit for a starter kit but I’m not sure if my 48v battery 100amp / 20ah battery would be enough for the little bit kit ?
@VoltronWatts I just have a 48v generic my1020 motor. I didn't realize or I forgot that e&c had their own version so I thought any my1020 would work.. looks like I'll have to upgrade the motor. Hopefully it didn't damage the controller I did super low settings when I tried to give throttle. Time to go 72v
@@VoltronWatts do you prefer there swing arms or the sotion one I’m wanting to go with this little bit set up but I’d really like the sotioj swing arms boss what’s your opinion
From my understanding 120 battery amps is the max the little bit can take. I THINK you can still run your battery but you won’t be able to run it at 200.
It’s not about the ah it’s mainly voltage and amps. It can handle up to 72v 120a. So if you want a electro & co and run 200a then you want the trumoto. You can absolutely run that battery you just gotta go into the controller app and put the amps to 110 I would reccomend.
That’s not all true. Little bit can take 76v battery. TruMoto is the app/software. If you want to run over 120 battery amps you need the noisy cricket controller from E&C 👊
Super informative ! 🚀🚀🚀 thanks bro !
Yes sir!! 🫡
Exactly what I needed to see before starting my build. Can’t wait to try this thing out. Thanks!
Hell yea brother! Build on! 👊
You know the best things about your videos is that you list the links and the descriptions to help others with builds & ideas I have went through multiple channels for help and for ideas and your channel is A1 never met you man wish I can you’re cool and thanks for the help
Dude, I appreciate you🙏 thank you for commenting and watching. If you ever have questions about a build just drop here like you did and I’ll get back to you 🤜🤛
Awesome video man almost finished with my build using the same kit
Very nice!! Thank you for watching! 🍻
Bro nice video btw can’t wait for the pro spec video 😮
Thank you for watching and your support man! Pro spec is going to be better than any other pro spec on the internet!
@@VoltronWatts hell yeah good luck man
Always such great informative videos. 💯
Thanks man. That means a lot! I don’t do wheelies or run from the cops in order to create content. I want my viewers to be educated 🫡
The man with the plan..thanks for drag tip❤️🔥🙏🏻
Yes siiir! 🤙
That drag mode thing is pretty sweet!
Right!! I never really messed with it but I dig it! 🤙
@@VoltronWatts impressive to see 60mph on that controller too only 9kw.
@bj97301 yea, not to shabby. Had 2 methods of measuring speed too. 💪
I wish it was the lil bit paired with an amorge battery I really wanna see how it works
That baby be moving 💯 good video
Not bad right! 60 MPH is plenty! 🚀
Hey, i was wondering which swingarm to buy as there is a more expensive one and a cheaper one, I've been reading and don't understand what the difference is
Probably just the length. I have a video on the Midwest mini mods swing arm
Awesome video and content brother 🫡🤙🏽 I really like my MX500 build my MX rips 65+mph🚀
Build list:
-MX500
-76v24ah E&C Battery
-E&C extreme razor kit
-E&C TruMoto, noisy cricket controller
-E&C extended swing arm kit
-E&C Fork kit
-E&C chain kit (gearing 10T/61T)
-E&C 10” super moto tires/wheel kit
You’re killing it bro!
@@VoltronWatts you’re full, sending it, bro 😎 👌🏽🦾
Yes sir!
Your view on hub vs mid drive motors? I absolutely hate chains so I've installed 3000w 14" rear hub motor on my mx500 and love it. I also installed 5000w 12" hub motor on my pocket mod. I don't see many videos of razors with hub motors. 🤷🏾♂️
You’re right, there arnt that many. I like hub motors too! Very quiet and easy to use. No Maintenance 🤙
I want to put a hub motor on my pocket mod too. Which one did you buy?
Can the kr5v motor mount to one of these swing arm as in the video? ?
Yup
Hey great video thanks for sharing the gear ratio with us all. Is that ratio your standard ratio across different models. Can you give me an approximate min max for ratios. Thanks for your time. appreciate you greatly.
I don’t have a standard that I go with. I use em all 💪 and thank you for watching and thank you for commenting! 🫡
When you dropping the build sheet and video on this bike
What do you want to know about it? I’ll give you all the deets 💪
Vid link for mx650 plastics on sx500
What you mean?
What phone mount are using? Seems solid and looks Iike it using "congested" handlebar space 🧐
It’s been good to me
amzn.to/3LIzsRe
I have the same setup on my Razor but my motor has a stutter at low speed when I roll off of the throttle. My regen is set to zero but it still has this issue. Have you experienced this problem?
I havnt. Did you do the motor pairing procedure in the app?
@@VoltronWatts I did, I followed the instructions that were included from E&C. I did a test today with my E&C my1020 motor and the issue stopped. Obviously an issue with my EC4P, thanks for the response.
No problem 👍
Would I be able to pair the little bit controler with an amorge 72v 28ah 175a(the one on alibaba?. If yes what settings in the app should I put?
Sure can. But the little bit can only handle 130 battery amps if I remember right. So you would want to set that in the trumoto app. 🤙
Sorry for a similar question just want to verify before I purchase..I ordered 72v 32ah 200amp discharge from hotpaxx..can I run little bit controller as long as I input my battery info properly? Thanks
Sorry for a similar question just want to verify before I purchase..I ordered 72v 32ah 200amp discharge from hotpaxx..can I run little bit controller as long as I input my battery info properly? Thanks
Totally
@ thanks love your content!
Thank you for watching and commenting!
I see u thanks for all the info
Hell yea brother!
Hey voltron I was so exited when I got the little bit in the mail and when I hooked everything up the volt meter was saying 81 volts and full but the app was throwing up a error code 2 saying the volts is too low what should I do. I’m so bummed I was so exited to ride it
I have never heard of that error code. What motor? Have you emailed the company?
I bought the ec4p lite and emailed the company but they still haven’t got back to me I wonder if it’s a motor problem or a controller problem or battery issue
So does it go 50mph out the box?! Whats the fastest you clocked it at
Yes. 50 pretty easy. I’ve gotten it up 65 or so with gearing 🤙
ay man i bought a full mx650 build from someone for 1400$ it has the full kit with the noisey cricket ec4p and a 76 24ah battery with the e&c extensions. but the motor is making a super loud noise when the chain is on and it won’t spin the rear wheel at all and idk if e&c would do anything since i didn’t buy everything from them
No idea man. Have you contacted them?
@@VoltronWatts yeah but idk if they could
help since i didn’t buy all the parts from them
@ChiLly___ and with a shot
What back suspension
amzn.to/4hpokqU
Can you put mx650 on a sx framw
Yes. Just need a longer shock. I have I video on it actually
@@VoltronWattswhat is it called
do you prefer the Midwest swing arms or the sotion one I’m wanting to go with this little bit set up but I’d really like the sotion swing arm boss what’s your opinion
I have never used a sotion swing arm. The MMM one is nice. I think the sotion arm is pretty much the same
@@VoltronWatts I thought I seen a video of one of your builds with a sotion swing arm dang was hoping for good feed back on the sotion kit as it comes with a wheel
@carloscuevas164 I have a video of the FW01 swing arm /motor kit. But not the Sotion swing arm with the FW11
@@VoltronWatts ohhh I get you boss sweet okay I’ll go with the sotion swing arm boss on the side note your video is steering me into the little bit kit for a starter kit but I’m not sure if my 48v battery 100amp / 20ah battery would be enough for the little bit kit ?
Where do you usually get graphics from
I have two places. A guy named Christian Castro on Facebook or kalairgfx.com
@@VoltronWatts thanks I’ve been looking for some purple graphics for crf50 kit and I’m having a hard time finding some like I’m looking for
i have a vevor 48 volt build but my dream is to get a 72 volt build. but i will never get if I'am being honest it is just too expensive
I hear ya man. Save up and get what makes you happy!
What mount did you get for your swing arm
This one bolts on. 💪
but like for the motor thanks
It just bolts in the swing arm. No need to buy any mounts
is there no way to disable regen? i cant get through set up cuz it says my regen is too low... i dont even want it
On the little bit it shouldn’t even let you adjust it if I remember right. I think it’s already set at 0
I just figured it out had to change charge amps to 5 i was trying the regen slider lol but now motor doesn't work still yay
@Jronesfpv what’s up with the motor? What motor you got?
@VoltronWatts I just have a 48v generic my1020 motor. I didn't realize or I forgot that e&c had their own version so I thought any my1020 would work.. looks like I'll have to upgrade the motor. Hopefully it didn't damage the controller I did super low settings when I tried to give throttle. Time to go 72v
@Jronesfpv send it! Don’t forget about the Voltron discount codes 🫡🫡
What swing arm are you using?
Midwest mini mods. I mention it in the first 30 seconds of the video 😆
@@VoltronWatts do you prefer there swing arms or the sotion one I’m wanting to go with this little bit set up but I’d really like the sotioj swing arms boss what’s your opinion
Dude mines insane it screams and I do 65mph everywhere 😅
Hell yea brother! 🚀
What helmet do you wear and what helmet do you recommend?
I have one of these and it’s been great!
amzn.to/3SQPzQG
@@VoltronWatts thank you
@cousincrew7886 🫡
my v1 burnt out on a ride and they replaced it with a v2 for free, sucks that i dont have a key anymore tho.
I hear ya. They have a key version for this controller
So if I have a little bit I can’t run a 72v 32ah 200amps I asked all the Facebook groups, but no one answered
From my understanding 120 battery amps is the max the little bit can take. I THINK you can still run your battery but you won’t be able to run it at 200.
It’s not about the ah it’s mainly voltage and amps. It can handle up to 72v 120a. So if you want a electro & co and run 200a then you want the trumoto. You can absolutely run that battery you just gotta go into the controller app and put the amps to 110 I would reccomend.
@@VoltronWatts thanks just trying to get the max range out of my mx650
That’s not all true. Little bit can take 76v battery. TruMoto is the app/software. If you want to run over 120 battery amps you need the noisy cricket controller from E&C 👊
Amp hour is just the size / capacity of the battery. Controllers don’t care about ah