Unfortunately we do not have access to that vehicle at this time but the 2006 model and the 2007 really didn't change too much on the inside so the process to removing the panel will be similar.
thanks very detailed- I just bought a 2005 with some damage on the driver side panel due to the seatbelt- are there any significant differences to the video?
i need some help , i have 2006 mrv , i remove the plastic part of the door and i check the power window motor and its working ,every thing seems to be working in the main panel and the switch well but i discover an extra jack and i can't know where it goes
What is the name of the rubber part on the very top of the door? Weather strip? Window seal? Mine is loose (or I need a replacement) and can't figure out how to get it attached securely onto the interior side of the door panel? It looks like there are about 7 triangle shaped "clips" that are supposed to go into little holes in the panel ... ? Any help?
+desouzapj It sounds like you are referring to the dew wipe, it is also referred to a door belt. If you need to replace the one that you have, then dealer might be able to get one for you. Hope this helps you out. 1aauto.com
Thank you for the great video's. now i am wondering how to replace the front and back seat belts of my Honda crv 2004. Can you please make a video on that item please
+Ryan Donkers We're always cycling through cars filming hundreds of common repairs for common vehicles every month. We'll add this to our list of repairs to film. Check back again and hopefully we'll have it soon.
+Ryan Donkers Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
+Oscar Lagerwall You would need to remove the door panel to access the inside of the door, so that you can perform the repair. Hope this helps you out. 1aauto.com
+Rose Grace Galan Thank you for checking us out. You may do it this way, but for ultimate safety is highly recommended to disconnect the battery prior to removal. 1aauto.com
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Excellent video.
Your extremely through and thank you for speaking clearly n slowly.
You saved me from destroying my moms door panels! 🙃
If I change the drive side actuator will that make all the doors unlocked or will I need all 4
Unfortunately we do not have access to that vehicle at this time but the 2006 model and the 2007 really didn't change too much on the inside so the process to removing the panel will be similar.
Thanks! Changed the actuator and lock cylinder in my 2003 CRV thanks in large part to this video!
No there should be no differences between the model shown and the 2005 model.
thanks very detailed- I just bought a 2005 with some damage on the driver side panel due to the seatbelt- are there any significant differences to the video?
Just what I needed. So great. Thanks!!
Thanks for watching. We're glad you liked it. 1aauto.com?RUclips&CTA%20Comment&ATony 866-403-3393
Just used this video to reattach the door panel. Great job!
Repent turn to Jesus Christ he's coming soon obey his teachings and you'll be saved
So helpful. Thank you very much.
Thank you. Keeps me from messing up. 👍🏻
i need some help , i have 2006 mrv , i remove the plastic part of the door and i check the power window motor and its working ,every thing seems to be working in the main panel and the switch well but i discover an extra jack and i can't know where it goes
Great video. Thanks for the tips!
I just replaced my passenger side door mirror and connected the power cable by removing / replacing the door panel.
My door is stuck in the locked position and won’t open, I can’t get to that little button to press. Any recommendations on how to get it open?
Also, how do I take the panel out with the door being closed?
Did you ever find how to do that i have the same problem
Thank you very much. Great demonstration!
What is the name of the rubber part on the very top of the door? Weather strip? Window seal? Mine is loose (or I need a replacement) and can't figure out how to get it attached securely onto the interior side of the door panel? It looks like there are about 7 triangle shaped "clips" that are supposed to go into little holes in the panel ... ? Any help?
+desouzapj It sounds like you are referring to the dew wipe, it is also referred to a door belt. If you need to replace the one that you have, then dealer might be able to get one for you. Hope this helps you out. 1aauto.com
do you have videos of how to replace light bulb gauge in CRV 2004 A/T model?
+vin gumaro Use our video library and select your year, make, and model for all videos we have for your vehicle: www.1aauto.com/videos
Thank you for the great video's. now i am wondering how to replace the front and back seat belts of my Honda crv 2004. Can you please make a video on that item please
+Ryan Donkers We're always cycling through cars filming hundreds of common repairs for common vehicles every month. We'll add this to our list of repairs to film. Check back again and hopefully we'll have it soon.
@@1AAuto thank you for your help. And keep on going with the great information and help to all the car heads out here.
+Ryan Donkers Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
is it enough to just remove the inside handle if I want to replace the one outside or do I have to remove the whole panel?
+Oscar Lagerwall You would need to remove the door panel to access the inside of the door, so that you can perform the repair. Hope this helps you out. 1aauto.com
i lost some push in rivet plugs while i was doing this do yo know what size they are so i can buy some
+cisko kiddd You may be able to purchase new ones through the dealer. Hope this helps you out. 1aauto.com
is it ok to removed it without removing the baterry terminal?
+Rose Grace Galan Thank you for checking us out. You may do it this way, but for ultimate safety is highly recommended to disconnect the battery prior to removal. 1aauto.com
Thank you so much 😊
Nice
Just seen your video. is there a difference on a 2001 model compare to the one you demonstrated on?
HI, it may be a similar process to the one shown in this video.