Great Video. There is a simplier way however. 2004 CRV - 1AAuto wanted only about $40 for a Black mirror, I order both sides so they would match. You do not need to unplug all the wires, Took less than 25 min. Follow the A1 instruct for popping door panel, no need to remove other plugs. You will have enough access to the Mirror cord to do all you need. Only remove the 4 phillips screws, pop the door panel and let it carefully hang while you unplug the mirror connection.both doors-very simple
Agreed. You just need to be able to keep the panel close, so that you don't stress the connection, while you are do the replacement. If you are uncertain, follow the video.
Superbly wonderful video! Just replaced the passenger side mirror on my mom's 2003 CR-V. Saved her almost $300 in the process over having it done at a dealer or private shop. It was slightly less complicated than the driver's side since there is no power mirror switch, trunk release, or power lock switch on that side. Thanks for posting this!!!!! Now I'm about to use your guide to replacing the cabin air filter. :)
Superbly wonderful video! Just replaced the passenger side mirror on my mom's 2003 CR-V. Saved her almost $300 in the process over having it done at a dealer or private shop. Thanks!!!!!
+Freedom Fan Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Gary Wright
Thanks for the good instructions and very good video. I could change the passenger side mirror (which is slightly simpler) using following the instructions on this video. Thanks a lot.
Great video! Regarding the waterproof seal on the inside of the panel, did you break the seal to get to the wires for the mirror? If so, how do you seal it back/do you need to? Thanks in advance
Understanding how to release the wiring clips, might be hardest thing, but if you follow the video, should be ok. The screws under two screws under the window control are at an angle, so lean down to locate them.
+DC Redz Thanks for watching. If any of our viewers need to make this repair we carry the replacement part shown in this video on our website. Here is a link to them www.1aauto.com/1A/Mirrors/Honda/CRV/1AMRP00765?RUclips&CTA+Comment&GFzxCVh7k
Great video.... what an absolutely moronic design. If they had made the connector for the mirror cable up by where the 3 bolts are to remove the mirror you wouldn't need to remove the entire door panel. I love this car but some of the designs make me very angry.
No, not likely. With changes in design and cosmetic appearance, most of these processes also change. Buy your auto parts from 1AAuto.com?RUclips&CTA%20Comment&ATony
The front right door key lock cylinder change video is out of reach, I have looked everywhere and on 1AAuto.com and on youtube, have you deleted it..??
Hi. Good video. I would like to see the procedure for Crv 2016. Please. Someone smash my passanger mirror and it's broken, but the glass is still fine.
+TT SA We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com
![Kumamoto Masters Japan 2024 | Gregoria Mariska Tunjung (INA) [5] vs. Akane Yamaguchi (JPN) [2] | F](http://i.ytimg.com/vi/EIjZybhsWqA/mqdefault.jpg)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
This seven year old video is still helping people out. Thanks very much, it helped me.
Even this video was 9 years ago, it helps me a lot today.. save me hundreds of dollar... thumbs up for me 👍
Great Video. There is a simplier way however.
2004 CRV - 1AAuto wanted only about $40 for a Black mirror, I order both sides so they would match. You do not need to unplug all the wires, Took less than 25 min. Follow the A1 instruct for popping door panel, no need to remove other plugs. You will have enough access to the Mirror cord to do all you need. Only remove the 4 phillips screws, pop the door panel and let it carefully hang while you unplug the mirror connection.both doors-very simple
Agreed. You just need to be able to keep the panel close, so that you don't stress the connection, while you are do the replacement. If you are uncertain, follow the video.
Hi there, just wanted to say I appreciate your video. Followed this process and replaced my damaged wing mirror. Felt great to get that done myself!
Superbly wonderful video! Just replaced the passenger side mirror on my mom's 2003 CR-V. Saved her almost $300 in the process over having it done at a dealer or private shop. It was slightly less complicated than the driver's side since there is no power mirror switch, trunk release, or power lock switch on that side. Thanks for posting this!!!!! Now I'm about to use your guide to replacing the cabin air filter. :)
Superbly wonderful video! Just replaced the passenger side mirror on my mom's 2003 CR-V. Saved her almost $300 in the process over having it done at a dealer or private shop. Thanks!!!!!
Thank you so much for this video. You saved me ~$300 in labor alone! Only took me about ~45 minutes.
+werdna7930 Thank you!
Thanks for the video!!! I changed out the broke passenger side on a 03 recently in less than a hour.
+Freedom Fan Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Thanks for the part and the instructions! Went very well and only took me (beginner with automotive stuff) about 20 mins from start to finish.
Im in the UK and found this to very helpful, I cant order parts from you as its cost prohibitive for shipping but would if i lived in US . Great video
Thanks for checking us out. 1aauto.com +Terry Rance
I am now ready to install my replacement without worry and save a lot of $$$ in the process, very nice how to video.
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Gary Wright
Thanks for the help - I was able to do it in less than an hour start to finish. God bless you!
+Ken Lang Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
I will - now that I know you are there - blessings
great video! A no brainer....took me about and hour....but I took my time. Thanks!
Thanks for the good instructions and very good video. I could change the passenger side mirror (which is slightly simpler) using following the instructions on this video.
Thanks a lot.
Awesome video. Explained very well. You saved me $105. Thank You.
I don't need to remove the whole thing. Can I just replace the outside cover? Is that duable?
Great video! Regarding the waterproof seal on the inside of the panel, did you break the seal to get to the wires for the mirror? If so, how do you seal it back/do you need to? Thanks in advance
Hot glue gun. $5> at any craft/fabric/hobby shop.
close ups on removing door panel would be very helpful....
Understanding how to release the wiring clips, might be hardest thing, but if you follow the video, should be ok. The screws under two screws under the window control are at an angle, so lean down to locate them.
Thanks for the video! Is the process the same for a 2008 Honda CRV,or is different for models after 06?
Thanks for the help!
great video, worked perfectly. thanks
+DC Redz Thanks for watching. If any of our viewers need to make this repair we carry the replacement part shown in this video on our website. Here is a link to them www.1aauto.com/1A/Mirrors/Honda/CRV/1AMRP00765?RUclips&CTA+Comment&GFzxCVh7k
Hi, I am glad I found you, very helpful!!!
+Jose Garcia Thanks. Glad to hear we could help you out. 1aauto.com 866-403-3393
Thank you so much, extremely helpful
Thank you for watching. Please let us know how the repair comes out!
1aauto.com 888-844-3393
1A Auto Parts thank you helpful
thx man well done.
Yes you would need to remove the door panel.
Great video.... what an absolutely moronic design. If they had made the connector for the mirror cable up by where the 3 bolts are to remove the mirror you wouldn't need to remove the entire door panel. I love this car but some of the designs make me very angry.
Thank you
Thanks for checking us out. 1aauto.com +John Becnel
is this the same process for a 2013 Honda CRV?
No, not likely. With changes in design and cosmetic appearance, most of these processes also change. Buy your auto parts from 1AAuto.com?RUclips&CTA%20Comment&ATony
The front right door key lock cylinder change video is out of reach, I have looked everywhere and on 1AAuto.com and on youtube, have you deleted it..??
His camera isn’t close enough to see the details of removing the blk mirror part or the switch assembly
Hi. Good video. I would like to see the procedure for Crv 2016. Please. Someone smash my passanger mirror and it's broken, but the glass is still fine.
+TT SA We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com
Do you have to have the door " free "...cant you just prop it up??
Thanks for checking us out. Have a great day. 1aauto.com 888-844-3393
This isnt a 2007...