How to Re-calibrate SYMA Quadcopters X5C X5SW
HTML-код
- Опубликовано: 27 июл 2024
- Re calibrating your quadcopter is important when flying in headless mode or after a crash that might have thrown off the gyro.
Full review of Syma Explorers: • Syma X5SW FPV Explorer...
More RC Quadcopter Reviews - • RC Planes, Quads, Cars... - Развлечения
Excellent video and after watching numerous videos that didn't quite fix the issue, your's was the one that explained it all concisely - so relieved, so many thanks Erik and now I can start to enjoy my first drone !
Short and simple yet very informative, thank you!
Great Video, solved my two problems, I was able to recalibrate Level and fine position control, mostly. The manual had nothing clear and detailed as this video on these two items. My D360 is now flyable once again. Thanks so much, your the best!
This helped a lot, i got this drone for christmas and it kept going to the side, now it flies straight. Thanks a lot :)
Thank you and God bless, my drone was constantly going left instead up but after these video it was flying properly.
Thank you so much I have drone like the x5c but it’s a different model and this helped so much, I took it outside after I did this and it worked perfectly and before it would constantly go to the right, thank you again
thanks so much
my drone hasnt been working for a month and i decided to whatch a vid to get it working.
IT WORKS NOW!
thank you so much i spent hours tryna find a decent video and now it works perfectly XD
This video helped me so much thanks a ton! Can you make a video explaining all the Syma controller things please though? I didnt know what trim was until now
Simple and good explanation thank you
This is by far the best video I have seen on RUclips explaining reset/re-calibration and trim of a quad-copter!!! It is very clear and concise. Thanks, Erik.
This really helped me because my drone had a problem for a month
you're a beauty. totally fixed my Syma fpv drone
thanks! just what we needed!
thanks i crashed my drone about a month ago and not been able to use it since, this did the trick 👌
Thank you...i needed this
Thanks it solved my drone problem
Thanks a lot for this. It's a very good video
huge thanks for the video!
Thanks. Works like a charm
OMG Thank you
You helped me so much
With my drone
So grateful
You're welcome!
THANKS IT REALLY HELPED!!!!!
Thanks for the video! Can anyone please tell me what’s the difference between mode 1 and 2? Does mode to 2 give you better range?
Erik,
Nice video.
I have the Syma X8C and recently cannot get the transmitter to connect with the quadcopter. Any suggestions?
Thx!
Hi, i have a Syma X5SW . And one of the electric motors turn it self on when i connect the battery ( runs all the time). It happen after a crash . When i turn the controller on and the drone on , the three other motors work fine and as it made to . . But the last one looks like it lives its own life. It just turns arounde all the time. I have too remove the battery for it too stop. I have tested with a other motor . But i get the same problem.
Talking about trim...one of my trim is neither being displayed on lcd nor i hear a beep on adjusting. All other three trims are good. How do i figure this out?
Can you tell me where the ZL SG700 drone is supposed to return to once you please the return button. Mine flew straight passed me into the house behind me. I am not game to try it again without knowing where it should be going. Any advice would be appreciated.
Help me my syma x5 drone is go automaticly right or left side so what I do
Thank you the video was helpful
Hi friend...i bought all the parts separately and constructed it...the problem is my drone is topling again again it is not able to fly..what to do pls help...
Perfect, simple and short explanation. Thank you 🙏🏼
Mine hovers bout 6" off ground now. Will not climb. When I let off throttle the lights will flash and it won't fly until I turn it all off and reconnect the remote again.
i have a Bojiang S5C-2 and it keep trying to go vertical or trying to spin, i tried every tutorial and nothing works! please help me
hi eric, i tried to do this, but the minute i try to push my throttle to the right, the blades try to spin and take off. it does not enter the reset mode. any recS?
the drone s89 is not flying, so i want to do factory reset but the drone is not resetting. I pressed the throttle lever and the directional lever at the same time which I angled to the button right corner but the drone is not factory resting. Pls any help!!!
When I tried to do that my light kept blinking and not stopping and lost connection with the remote. Every time I turn it on the remote shows connected but the drone light is blinking and not connecting to the remote. Now how do it connect my remote to the drone?
I got the holystone H120D for xmas last year. It's been in the box waiting for spring to fly it. For some reason I can't get it started. It a brand new quad totally unblemished. I've flown drones before, but can't get this thing off the ground. It calibrates fine, but when I go to start the motor nothing happens. I believe I'm following the instructions properly., but nothing. I was so frustrated that I purchased the syma featured in the video and got it today. I'm sure I have better luck with this one, but I really want to fly that HS. Any ideas? Thanks!
I have a zuzo fx1. Same remote. But the quadcopter not communicating
One of my trim buttons is broken, but it's all the way trimmed to one side and can't trim back. Is there a hard reset for the controller?
Mine won’t do it my controller is a little different then yours in the bottom screen part is opposite of yours where the circle set of buttons are on the left and the 3 vertical buttons are in the right you will probably never see this but do you have any idea?
My syma drone is broken and I will like to know how to fix it
Dear Sir,
My vision drone's transmitter doesnot display digital one so how will I be able to adjust the trim keys as my drone is leaning when I'm trying to make it fly,,please give a solution as I'm not able to sort out the issue..
HELP!!!
I went to recalibrate my drone & transmitter and once the levers were down & to the right the fast blinking started..BUT THIS TIME IT DOESN'T STOP!!!
The drone keeps blinking fast NO MATTER WHAT I DO!!!
I've turned it off and then on again... even unplugged the battery & re-plugged it back in and still NOTHIG: all it does is blink fast and be TOTALLY UNRESPONSIVE!!!
Any suggestions bud??
Thanks a million man🙏🏻🙏🏻🙏🏻
Thank you men it worked
My drone gears as lit bit gap in middle , This reason it make more sound and not takeoff quickly ,what I do now
I did this for my sons copter. We have the exact same one. Any other thing I should check
BTW Please disregard my last request...; it somehow fixed itself!!! I mean, I just kept repeating the process til it finally responded!
But the question I have is: does the SymaX5C have a headless mode? If so how do you switch to it please?
THANKS AGAIN 🙏🏻🙏🏻🙏🏻
I bought this drone and mine came with this cheapo white toy grade controller. Does anyone have any suggestions because the white controlled does not have a screen to see the trim settings. My drone almost every time takes off with a drift to the right. When I try to reset it the thing takes off and the right stick controls are back ward. Reverse is forward and left is now right. I have not been able to set the trim period. Does anyone have an answer?
i have a brand new unopened syma X5SW.. i have the drone talking to transmitter and the app downloaded and connected to wifi..when i turn on the app and push camera button it tells me "camera not connected" i have allowed permissions in the app still nothing..HELP!
Eric, had a old SYMA X 55w drone, purchased a new remote due to battery corrosion. I tried all to pair the remote with the aircraft and it will not pair. Any help please? Yes its fully charged, new batteries
How can i calibrate with the other remote control the white one it looks basic
Hello can anyone tell me what can I do to have my drone start up? Lights are on still when I turn it on
Thanks for this video
the lights on my drone will start flashing for about one second and then they will shut off. this keeps repeating until i turn the power off and i’m not sure what is wrong. all of the wires are plugged in, the drone is fully charged, and it’s fully calibrated. the camera works just fine it’s just the drone that won’t work. i’m not sure what to do and i don’t want to have to buy another one because mine is brand new.
It helped but not as much I have to turn on and off my drone to get a restart most time it doesn’t do anything when the lights are blinking
Why are the left and right joysticks mixed up
Can you please sow me how to Calibrate the SYMA X4 Assault Quadcopter. Thanks George
Hi can it auto take off and land? Obstacles avoidance?
Thanks alot!!! It works
How do I fix my drone when it does not calibrate with the controller?
I need to know how can I use GPS KY10 drone plz help me
will try now and let u know
Thank you. I took mine to a sports field to try, but it kept flipping over on take off. I tried both sticks out both sticks in. I wish I knew it was both sticks bottom right. It fixed my problem.
What does it mean when you power up the X5SC and all leds are blinking fast. I try to bind the remote, (The remote beeps and the light on the remote goes steady) but the Syma keeps on flashing. It's not doing it now, but when I was in the field it would keep on doing it. This was my first outdoor flight. I had flown it indoors successfully so I knew it wasn't faulty (originally).
I bet its low batterie power, try recharging your batteries before you go out (dare I say it?) flying? the li-po batterie don't hold their charge very well when getting past there sell by date's! as every " USB re-charge" take its toll on them unless you have a very pricy li-po batterie charger, and not the cheap crap "USB, beat the crap out of your batteries" charger that comes with the bird!
Batteries charged on X5SW and new in Controller. X5SW flashes lights rapidly and won't bind to Controller, any suggestions for me? I appreciate your Videos....
I have a bayangtoys x5c-1. Got this 5 years ago, but now when I checked it again, it wont fly anymore. Even its blades wont rotate anymore
I tried that trick and on the second time to re-calibrate it just keeps blinking and not starting
great info...i now know i back to factory settings...only problem is how i fly it..have no idea what so ever
My remote doesn’t turn on even if i put new batteries in it do you know why?
CAN BOND A E55 TO NEW CONTROLLER
Thx for the help
I cant connect syma camera to syma fpv app please do something 😔
Yeah my drone is not working and not functioning properly so can you please help me to do that make another video
What is 6 Axis stabilization system
Thank you so much bro
How do can I fix the camera
If there is a camera underneath the drone why is there not a camera screen on the controller
Done that but still lift up bit tilted
So my controller got ran over, on my x5hw can I use any of my leftover syma scw1 controllers collecting dust & link it up? I have loads of controllers of drones lost byob ocean & flyaways
Maybe! give it a try if you havent yet. but its been a month so you probably already did lol
Lol I'm 6 years late but my syma x5hw drone the lights just keep flashing fast and my propellers won't rotate 😮😢
Tried it drone never recalibrated. Nor was flashing being calibrated.
Thanks!
i have Syma x5sw-1 and iam learning to fly this thing
your videos are very helpful
just wanted to know that can x5sw-1 have headless mode or can it be done by any specific settings?
thanks in advance
You're welcome. Yes, it had headless mode. It's the top left button. You'll have to press it for 2 seconds. On page 10 of the manual you'll find more instructions - www.symatoys.com/upload/201609/13/201609131500596655.pdf
Erik Summer thanks mate ,cheers
I'm having trouble with audio, I can record video, take pictures but video with no audio at all, any Ideas? thanks in advance.
Same and I can’t see the video
Hello, my drone goes to the left when I press on the right, and goes to the right when it is supposed to go to the right, same problem for forward and backward, please help me fix this.
It might be the position your flying your drone from
I have this exact drone, and right now my biggest problem is that it keeps flying straight left by itself with the camera facing forward whenever I fly it. I don't know what to do. and it's not me using the toggle on the left
You probably already did, but have you put in enough right trim to get it to hover in place? Also, check the blades to make sure they spin freely, sometimes hair will get stuck and cause one blade to spin slower.
THANK YOU SO MUCH!!!!!! i didn't know the trim button works left/right up and down :)
I can't get my syma x5sw camera to give me a feed to my phone. I've done it before with my previous syma , but for some reason I can't get it to on the new one ,any suggestions
Download the apk file from the website symatoys.com
My X5C-1 2.4GHz 720P Camera One Key Return RC Drone Quadcopter isn't responding still and the blades won't move
Thank you
thank you
Hi Eric. Thanks for the instruction on resetting. I have the same drone, I flew it inside and must have knocked one of the motors. I replaced it this morning. Now the blades on the right hand side don't turn as fast as the left hand side ones, so when it takes off the drone just flips to the right. Not sure how to get it flying again...
Found the problem. The motors are specific diagonally, and so are the blades! Should be working fine now. One more question, is it possible to put the LiPo batteries into parallel, to increase the flight time? Or does each battery have a volt and amp regulator which wouldn't work in parallel?
The easiest way to increase flight time would be to go with a higher mAh lipo. These are 750mAh - amzn.to/2oYsCu8
I'm not sure about adding the batteries in parallel. I've heard of people doing that on larger hobby grade drones, but not these smaller ones.
The drone moves!
How do I factory reset SHRC drone SH5? My drone will not go to full throttle now and it is unbalanced. Thanks for any help! SHRC has poor customer service
Not going full throttle might be a battery issue. I'm not sure how to reset the SHRC drones, but try pulling both the left and right sticks to the bottom and towards each other. Hold it for 15 seconds. If that doesn't work, try down and away from each other.
ye kaha milta hai??
My Syma x8, the yaw and roll have swapped sides from the left stick to the right stick and vise versa.
That happens when you switch modes. Look at the screen and find the button that changes the mode and you should be good to go.
Thanks so much!
Can you please show a comparison between "Regular" & "Headless" modes on this model and how to set it to headless and back? Thanks a million! :-D
Hi Amir, I give an example of headless mode in this video - ruclips.net/video/P261antbnew/видео.htmlm38s
It'll work the same way as the Syma X5C. I believe the Syma beep or flashes while in headless mode.
Oh my...how's I miss it..?!!!
Ok thanks, I'll check it out again.
And THANKS A MILLION FOR THE PROMPT RESPONSE man, right on, YOU'RE DA BEST🙏🏻💯👊🏻😎
thx so much!!
how can i have my drone to lift straight up_? i did recalibrate....
When you take off, it doesn't fly straight up? Does it drift off to the side? Check every motor and make sure each blade spins freely. Sometimes hair or dirt can get into the gears and cause one motor to slow down. Also, are you sure all blades are installed properly? If you've installed new blades, they need to go on a specific motor.
How can I switch between mode 1 and 2? I have tried to switch, and it keeps beeping. Any ideas?
When you say mode 1 and 2 are you referring to the speed change or moving the throttle to the right side?
Thank u dude
How do I calibrate a quadrone pro cam drone
Put both sticks down and to the right. Hold for a few seconds and you'll see the lights flashing. Here's the manual on that quad flyquadrones.com/wp-content/uploads/2015/09/AW-QDR-PCAM-Manual-Book.pdf