For global awareness the pump shown here is a pentair starrite pump usually used for residential shallow wells to feed sprinkler systems. This is now branded by Berkeley and pentair
I once found a barbie head stuck in the check valve, along with countless socks and plastic bags 😆 But I recommend this video to community members so they understand how to take care of it 😎👌
We lost our water supply from the city water in our rural community due to the Caldor fire. I get a 2500 gallon tank, and I didn't know what pump to get other than a pressure sensing will pump. I bought this one. CountyLine Convertible Jet/Tank System with 7-Gallon Pre-Charged Pressure Tank, 1/2 HP I'm hoping I can just hook up the supply to the tank jet fittings and plug it in and turn it on and it will function without just dropping a pipe into the top of the tank. I have no idea, but one way or the other it should work, unless I can be directed to a different pump.
Do i have to have a footvalve ? for my pond no one ever showed me it had a foot valve . There like this straight pipe that the pump attaches to and one coming out of pump to the pond .
DISAPPOINTED ... ... My pump is quite "mature" and I was more interested in the ELECTRICAL REBUILD side of PUMP REPAIR ... My old PUMP does a fine job of PUMPING Water ... but ... the ROTOR & BRUSHES may need replacement or repair / refurbishment ... Do you offer a VIDEO on the ELECTRIC end of a possible REBUILD ? ... Thanks COOP ...
Have you ever installed or used a Gould’s GT10 pump? I was hoping to use one to replace my J5s 1 inch discharge pump because I would like to up my discharge from the 1 inch manifold to a 1-1/2 but keep the rest of the lines off the 1-1/2 manifold 1 inch but up the size of one of the main lines to 1-1/2 this line has many 1 and 3/4 inch side shoots with regular garden hose faucets to each garden field 1000+ feet away. I have a 40/60 system now with a expansion tank. I think the GT10 pump said maximum pressure was 52 psi but is that full open and not necked down a bit if a valve is part closed? The reason why I want a larger pump is so I can sustain a high flow with multiple gardens open but still allow me to only open one, I can’t open more than one garden with the J5s now.
Hey is it possible to connect my air volume control valve to the drain port of my pump to create a pressure difference needed to pump air into my bladderless galvanized tank. The only port at the suction is the drain port. Normally there is a port above the suction intake port to connect the 7/16" tube connection to the air volume control?
Can 1 HP shallow jet water pump have capacity to lift or suck water from a distance of around 500 feet in plain level. I want to pump in from pond which is far away from my home .
Never and i really mean NEVER , check el. engines or el. componenets of any kind, for el.power breach like u did in this video. There is really to many tools for testing that instead of what u did. Atleast, but only if u DONT HAVE ANY OTHER WAY, check it with upper side of your fist (open hand) if there is electricity it will hit u and u will be able to pull your hand away from motor or some componet. Pls DONT DO IT with open palm and ONLY DO IT WITH SOME INSTRUMENT IF U ARE EDUCATED ENOUGH FOR THAT KIND OF WORK. Srry for big letters i am just trying to give some importance about handling el. power. Cheers
Great job explaining.thank you!
Glad it was helpful!
For global awareness the pump shown here is a pentair starrite pump usually used for residential shallow wells to feed sprinkler systems. This is now branded by Berkeley and pentair
I once found a barbie head stuck in the check valve, along with countless socks and plastic bags 😆
But I recommend this video to community members so they understand how to take care of it 😎👌
Thanks for sharing!
I appreciate your teachings!
you explained really good
Glad it was helpful!
Awesome explanation. Thanks boss
We lost our water supply from the city water in our rural community due to the Caldor fire. I get a 2500 gallon tank, and I didn't know what pump to get other than a pressure sensing will pump. I bought this one. CountyLine Convertible Jet/Tank System with 7-Gallon Pre-Charged Pressure Tank, 1/2 HP
I'm hoping I can just hook up the supply to the tank jet fittings and plug it in and turn it on and it will function without just dropping a pipe into the top of the tank. I have no idea, but one way or the other it should work, unless I can be directed to a different pump.
Do i have to have a footvalve ? for my pond no one ever showed me it had a foot valve . There like this straight pipe that the pump attaches to and one coming out of pump to the pond .
What fitting is used over the venturi?
Where could a person buy a new starter switch? the one with the long copper
Very cool thank you I have a Red Loin pump I need to know how is it the same what you show me --wire it up thanks
DISAPPOINTED ...
...
My pump is quite "mature" and I was more interested in the ELECTRICAL REBUILD side of PUMP REPAIR
...
My old PUMP does a fine job of PUMPING Water ... but ... the ROTOR & BRUSHES may need replacement or repair / refurbishment
...
Do you offer a VIDEO on the ELECTRIC end of a possible REBUILD ?
...
Thanks
COOP
...
How to change direction????
Have you ever installed or used a Gould’s GT10 pump? I was hoping to use one to replace my J5s 1 inch discharge pump because I would like to up my discharge from the 1 inch manifold to a 1-1/2 but keep the rest of the lines off the 1-1/2 manifold 1 inch but up the size of one of the main lines to 1-1/2 this line has many 1 and 3/4 inch side shoots with regular garden hose faucets to each garden field 1000+ feet away. I have a 40/60 system now with a expansion tank. I think the GT10 pump said maximum pressure was 52 psi but is that full open and not necked down a bit if a valve is part closed? The reason why I want a larger pump is so I can sustain a high flow with multiple gardens open but still allow me to only open one, I can’t open more than one garden with the J5s now.
Ben, it would be best to discuss your application over the phone. Please give us a call at 855.329.4519 (ask for Jeremy)
That's the same noise my pump makes the last five years I always thought it was some sort of a cavitation issue did you prime the pump?
Yes, @ 3:15
Hey is it possible to connect my air volume control valve to the drain port of my pump to create a pressure difference needed to pump air into my bladderless galvanized tank. The only port at the suction is the drain port. Normally there is a port above the suction intake port to connect the 7/16" tube connection to the air volume control?
The pump i qm having trouble 2ith is fot the pond i doesnthave a pressure witch and i dont thnk ihav3 afootvalve lolol
Can 1 HP shallow jet water pump have capacity to lift or suck water from a distance of around 500 feet in plain level. I want to pump in from pond which is far away from my home .
Yes, I have one set up that way. My 1hp pumps about 75 yards horizontal then up 20 feet into a cistern
Never and i really mean NEVER , check el. engines or el. componenets of any kind, for el.power breach like u did in this video. There is really to many tools for testing that instead of what u did.
Atleast, but only if u DONT HAVE ANY OTHER WAY, check it with upper side of your fist (open hand) if there is electricity it will hit u and u will be able to pull your hand away from motor or some componet.
Pls DONT DO IT with open palm and ONLY DO IT WITH SOME INSTRUMENT IF U ARE EDUCATED ENOUGH FOR THAT KIND OF WORK.
Srry for big letters i am just trying to give some importance about handling el. power.
Cheers
What a pain in the ass to prime this kind of pump.
I don't understand the purpose of this video.