I've had mine on 2 jobs now and I love it! I've put about 3500 brads (1.25" & 2") with only 3 miss strikes which I think is pretty dang good. I've been switching over to all cordless tools and picked ridged because of the cordless drill my son got me for christmas 5 years ago. My old 14.4 dewalt had finally given up the ghost and I needed a new drill so that is how I ended up with my first 18v ridgid tool. I've been so impressed with it that I now have 8 different 18v tools and 7 batteries. This gun has given me the confidence to think seriously about buying an 18v framing gun and leave the compressor home for airing up bike tires for the grand kids. Love these tools. Thanks for this review and clarity on the "Throttle".
Glad to hear that it's working great for you. I'd say 3 mis-strikes out of 3500 is very good. You'll love their 18V framing nailer. That's a great tool. Thanks for watching.
Agreed. I started with the drill and driver combo, then picked up a palm sander, then a multi-tool cutter, and now the brad nailer. Everything has been great so far. Fingers crossed that they honour their service agreement should I need it.
Hey Guys - I have the Ryobi, and as someone else commented, it does look similar with similar features; in particular the "pressure" dial on the back. It's certainly possible that they do not work the same, but here's how the Ryobi works. The "depth of drive" adjuster is the main determiner of depth. For instance, if you were using 1 1/2 inch brads in a softer wood, it would likely fire to approximately the same depth regardless of "pressure" setting; as the tool would have sufficient power in any pressure setting to fire the nail to the depth determined by the "depth of drive". However, if I had the "pressure" setting a bit lower and I then switched to much harder wood, I might find that nails that were being counter-sunk 1/16" in the pine are now sitting 1/16" proud. In that case, dialing the "pressure" up could solve that. Again, this functionality may be the same between tools. If it is, then maybe someone will find this of some use. Take care all!
Great review! Covered and demonstrated features, mechanisms, and effectiveness in varied and practical conditions, and did so clearly in record time with ease. Keep up the good work!
You mustve got the lucky one because mine stopped shooting the nails in pine flush by the 3rd rack of nails. Even after setting the depth lower they still stick out. Only ridgid tool ive ever regretted buying.
I’m having the same trouble. Right outta the box. So frustrating. Getting ready to call customer service. I have a ton of rigid tools and love them all.
Important tip... before you attempt to clear any hiccups be sure to remove any nails in the holder otherwise if there isn't a stuck/bent nail in there the spring loaded nails will shoot out after you flip up the lever!
Thanks for the review! I've been thinking about getting an 18 gauge cordless brad nailer so this was very helpful. I am gradually switching over to Rigid because of the LSA and not wanting to keep getting different batteries and chargers with different brands. I appreciate seeing how this nailer performs so thanks very much!
Great review and demo, thank you!. I just ordered online from HD this same brad nailer and hammer drill combo that comes with a 2 Ah battery and the charger for only $199 and on top of that a lifetime warranty that even covers the battery; you can’t beat that!
Thank you very much for the information and the demonstration. This was very helpful and understanding of this tour. I am currently in the market for a run and I have Rigid tools so this would be great to add to my toolbox and only have to use the existing batteries that I have.
You won't be sorry. This is a great little nailer. I will say that sometimes when you switch from single to rapid-fire, you have to remove/replace the battery (almost like an electrical reset). Works every time after that, but it's just wierd. Let us know what you think. Thanks for watching.
I have this, but mine will shoot 10 or perfectly then shoot a dozen or so barly sinking them. The sound is different when this happens. Have not been able to find a fix. Might just go buy a Milwaukie. Ive tried everything
I almost bought this yesterday but thought that I should do a bit of research first. Nice review. I feel pretty comfortable picking one up the next time I’m at Home Depot and add it to my other Ridgid power tools.
Ive had mine for a few years now. Not super happy with it. Sonetimes it blinks and either doesnt fire or makes a half fire sound without sending a nail. Im always using 2 inch brads.
Mine sometimes doesn’t shoot the nails when I press the trigger. I have to take the battery off and put it back on for it to work again. Has anyone else had this problem? How do you fix this? Is it common for this tool? Some of the reviews on HD website have had similar issues. Not sure how common though.
@@freddyjohnson6695 - have not heard of a fix unfortunately. I just remove the battery and put it back in. I’m hoping newer models will have this fixed.
Same issue... I have returned two of them in the last week to depot after just buying this nailer a couple weeks ago. Nothing more frustrating than getting trim glued, lined up, mitre nice and crispy and the nailer won't shoot.
nobody talks about how long this tool lasts! I know we got the LSA but I wanna know if this is worth it vs the gen 2 fuel m18 or flex's brad. The youtube and home depot reviews are ominously bad
It’s a manufacturing problem, nearly everyone is having this issue it seems. Some have tried lubricating with some success, but it doesn’t fix the problem every time. I’d suggest returning it for a different brand.
I have had one for about a year and a half. It shoots a nail every other time. Needless to say that is not good. Bump fire has never worked. I went back to my pneumatic nailer. I have had problems with all Rigig cordless nail guns.😢
The motor drives a piston forward compressing air in a cylinder. Once the piston reaches full compression a valve opens and releases the compressrd air all at once to driving the striker or plunger for the nail.
@@Fly2kill1 The latest Milwaukee 18guage cordless is better, I've used it on a daily basis for 6 months and not a single bad shot. My co-worker has the Ridgid and it does leave heads sticking up every once in a while.
Regular framing hammer= $15-$30 Titanium framing hammer=$150-$300 depending on handle. Titanium 10x’s the price of almost any component you replace. This market is driven almost entirely by price.
Should have done a real life scenario. Nail through ¾ oak into a pine 2x4 with 2 inch brads. Should be able to sink 2inch brads in solid oak or its worthless to me
I've had mine on 2 jobs now and I love it! I've put about 3500 brads (1.25" & 2") with only 3 miss strikes which I think is pretty dang good. I've been switching over to all cordless tools and picked ridged because of the cordless drill my son got me for christmas 5 years ago. My old 14.4 dewalt had finally given up the ghost and I needed a new drill so that is how I ended up with my first 18v ridgid tool. I've been so impressed with it that I now have 8 different 18v tools and 7 batteries. This gun has given me the confidence to think seriously about buying an 18v framing gun and leave the compressor home for airing up bike tires for the grand kids. Love these tools.
Thanks for this review and clarity on the "Throttle".
Glad to hear that it's working great for you. I'd say 3 mis-strikes out of 3500 is very good. You'll love their 18V framing nailer. That's a great tool. Thanks for watching.
Agreed. I started with the drill and driver combo, then picked up a palm sander, then a multi-tool cutter, and now the brad nailer. Everything has been great so far. Fingers crossed that they honour their service agreement should I need it.
Another reviewer didn’t understand how the fine tune dial help set the depth, glad I watched your video.
Hey Guys - I have the Ryobi, and as someone else commented, it does look similar with similar features; in particular the "pressure" dial on the back. It's certainly possible that they do not work the same, but here's how the Ryobi works. The "depth of drive" adjuster is the main determiner of depth. For instance, if you were using 1 1/2 inch brads in a softer wood, it would likely fire to approximately the same depth regardless of "pressure" setting; as the tool would have sufficient power in any pressure setting to fire the nail to the depth determined by the "depth of drive". However, if I had the "pressure" setting a bit lower and I then switched to much harder wood, I might find that nails that were being counter-sunk 1/16" in the pine are now sitting 1/16" proud. In that case, dialing the "pressure" up could solve that. Again, this functionality may be the same between tools. If it is, then maybe someone will find this of some use. Take care all!
Have this one, totally satisfied! My first brad nailer, ready for any my DIY projects. Thank you for the video
Great review! Covered and demonstrated features, mechanisms, and effectiveness in varied and practical conditions, and did so clearly in record time with ease. Keep up the good work!
Glad you made the video. I just bought my Ridgid brad nailer. Needed a all round brad nailer, this looks like the perfect one for me.
Great video! I learned a lot -- all that you shared was not in my owners manual, so I deeply appreciate your thoroughness.
You mustve got the lucky one because mine stopped shooting the nails in pine flush by the 3rd rack of nails. Even after setting the depth lower they still stick out. Only ridgid tool ive ever regretted buying.
I’m having the same trouble. Right outta the box. So frustrating. Getting ready to call customer service. I have a ton of rigid tools and love them all.
Important tip... before you attempt to clear any hiccups be sure to remove any nails in the holder otherwise if there isn't a stuck/bent nail in there the spring loaded nails will shoot out after you flip up the lever!
Yours is the first review that gave the weight of the tool. Thanks for that. I'd be interested in the difference in weight vs the older RO9890 model.
Clean drive 6.503 - Hyper Drive 7.73
I think the hyper drive is the 16 g.
Just picked one of these up. Can't wait to use it on my current renovation
Thanks for the review! I've been thinking about getting an 18 gauge cordless brad nailer so this was very helpful. I am gradually switching over to Rigid because of the LSA and not wanting to keep getting different batteries and chargers with different brands. I appreciate seeing how this nailer performs so thanks very much!
Great review and demo, thank you!. I just ordered online from HD this same brad nailer and hammer drill combo that comes with a 2 Ah battery and the charger for only $199 and on top of that a lifetime warranty that even covers the battery; you can’t beat that!
That's a very good deal. We hope you love them. Thanks for watching and sharing.
Thank you very much for the information and the demonstration. This was very helpful and understanding of this tour. I am currently in the market for a run and I have Rigid tools so this would be great to add to my toolbox and only have to use the existing batteries that I have.
Thanks for the review. Need a nailer for work and that’s going to be it since I am already on the Ridgid platform.
You won't be sorry. This is a great little nailer. I will say that sometimes when you switch from single to rapid-fire, you have to remove/replace the battery (almost like an electrical reset). Works every time after that, but it's just wierd. Let us know what you think. Thanks for watching.
great review, 👍This is so clear for someone like me who have no experience in using
Thanks for watching!
I have the old version of this and have not haven’t had any problems with it.
This one is a little smaller and seems to be even better. Glad the older model is working for you as well. Thanks for watching.
@@Shoptoolreviews probably end up getting this to. Thanks for the review
I love the older model
The Hyperdrive.
I have this, but mine will shoot 10 or perfectly then shoot a dozen or so barly sinking them. The sound is different when this happens. Have not been able to find a fix. Might just go buy a Milwaukie. Ive tried everything
I almost bought this yesterday but thought that I should do a bit of research first. Nice review. I feel pretty comfortable picking one up the next time I’m at Home Depot and add it to my other Ridgid power tools.
I got the older model and mine is shot after about 4 years of owning it. I was thinking the same as you and wanted to see if it's worth it
@@OFFICIALRAPTORTHERAPPER I bought one last week. Used it yesterday for installing baseboards and door casing. Worked as advertised.
@@billbowman8747 good to know ty for update
@@OFFICIALRAPTORTHERAPPER Hey, aren’t the Ridgid tools guaranteed for life? Or didn’t they do that back then?
@@billbowman8747 no they are not anymore
outstanding review for power nail brad. Thanks, Bro. I'll buy one from home depot.
Ive had mine for a few years now. Not super happy with it. Sonetimes it blinks and either doesnt fire or makes a half fire sound without sending a nail. Im always using 2 inch brads.
Is there a SETTING change for nailing on wall?
Mine works when standing over it and nailing down, but vertically.
Do you have a review on the Ridgid 16 gauge finish nailer . By the way, I really enjoyed this review. Well done👍👍👍
Thanks for your review. I’m going to pick one of these up tomorrow
Cool, the throttle mechanism looks interesting 👍
Also, you have to buy the tool from a certified dealer like Home Depot and not from just anyone off of Amazon.
Mine sometimes doesn’t shoot the nails when I press the trigger. I have to take the battery off and put it back on for it to work again. Has anyone else had this problem? How do you fix this? Is it common for this tool? Some of the reviews on HD website have had similar issues. Not sure how common though.
I am having that very problem which is what brought me here. did you get an answer?
@@freddyjohnson6695 - have not heard of a fix unfortunately. I just remove the battery and put it back in. I’m hoping newer models will have this fixed.
Very common issue. Seems to be a manufacturing issue. Only ridgid product I’ve regretted buying.
Same issue... I have returned two of them in the last week to depot after just buying this nailer a couple weeks ago. Nothing more frustrating than getting trim glued, lined up, mitre nice and crispy and the nailer won't shoot.
Mine did that at the start but doesn't do it any more
How does this compare to the ryobi, I'm looking at upgrading my Amazon brad nailer to something much more reliable
Bought this cause I have Rigid batteries, and not many tools for them. Love the way it shoots and feels working. Nice to see the test on the features.
nobody talks about how long this tool lasts! I know we got the LSA but I wanna know if this is worth it vs the gen 2 fuel m18 or flex's brad. The youtube and home depot reviews are ominously bad
is there a brand of nail or Brad that this gun shoots better than the other?
Interesting question… I would like to know it too
just got this it started out great but now it clicks the light comes on but won’t shoot help
It’s a manufacturing problem, nearly everyone is having this issue it seems. Some have tried lubricating with some success, but it doesn’t fix the problem every time. I’d suggest returning it for a different brand.
I have had one for about a year and a half. It shoots a nail every other time. Needless to say that is not good. Bump fire has never worked. I went back to my pneumatic nailer. I have had problems with all Rigig cordless nail guns.😢
I wa shooting through hardy x two.
It's a good gun but it's like you have to warm it.
Is there am air chamber in thre?
The motor drives a piston forward compressing air in a cylinder. Once the piston reaches full compression a valve opens and releases the compressrd air all at once to driving the striker or plunger for the nail.
Can u do a review on mag drills?
Wife wants to put flooring on the bathroom ceiling, Will it drive through that hard stuff?
I have this nailer. It drove a 2 inch nail through a 1.5 inch thick piece of maple. The nail was fully set.
@@homehackshowtos Ended up getting it for her for x-mas, haven't used it yet..
Ridgid is doing a pretty good job.
Yes, they are. Ridgid has some really good tools. Thanks for watching.
Looks just like the Ryobi I've had for years, with the same features.
How does this compare to the Milwaukee or DeWalt?
Dewalt is fly wheel. That’s a big negative.
I have this one and my boss has milwaukee, same performance basically but his does feel better in the hand but I love the pressure gauge
@@Fly2kill1 The latest Milwaukee 18guage cordless is better, I've used it on a daily basis for 6 months and not a single bad shot. My co-worker has the Ridgid and it does leave heads sticking up every once in a while.
@@Joeshmofoshoyo thanks. Kobalt is finally coming out with theirs which appears to be OEMed by Senco. Kobalt is my platform.
I own both the milwaukee and the ridgid. The ridgid is better
Very nice!
How come bamboo isn't a more widely used material, it being sustainable as it grows 10 get in one month if memory serves me correctly
I had the old version of this which I wouldn’t recommend to anyone. This didn’t countersink at least 30%of the time.
I keep telling people that they should make their parts out of titanium, lighter stronger, corrosion resistant, lasts forever, stronger than steel
Regular framing hammer= $15-$30
Titanium framing hammer=$150-$300 depending on handle.
Titanium 10x’s the price of almost any component you replace. This market is driven almost entirely by price.
It’s the same as the 18 ryobi same guts.
No its not lol
Should have done a real life scenario. Nail through ¾ oak into a pine 2x4 with 2 inch brads. Should be able to sink 2inch brads in solid oak or its worthless to me
Looks like a Ryobi.
I've had 3 of them and none of them work
I'm a builder.
I'd like to leave a like for this video but the likes are at 666...
I love Ridgid tools but they will not warranty nothing they tell you they will. they lied they guarantee it can be fixed for a hefty price
sooooo tedious
Thanks for watching.