What exactly you need for the job?Manual how to install timing chain kit on Audi S4 V8 BBK .
HTML-код
- Опубликовано: 25 авг 2024
- We made this video to help you out there if you are planning to do the V8 BBK chain replacement yourself. All you need to know about parts is what's needed for this job , bolt NM spec and installation procedure.
Link for timing chains with part numbers : www.ebay.co.uk...
Are you after hoodies ? link : vagtechnic.uk/...
If you want to follow us on FB or Instagram please check links below :
vagtechnic.uk
FB: / vagtechnicltd
IG: / vag_technic_ltd
Website: mfperformance.uk
FB: / mf.remapping.tuning
IG: / mf.performance.uk
Great video as usual! Just finishing up replacing all gaskets and seals(non-timing related) on mine. Nice to have content like this if timing is ever needed to be done. Thanks!
Great video. Thanks for putting it together.
Nice job. Very informative. Thanks for going through the steps to replace timing chains. Also, thanks for the smoke show. Added ambiance.
Perfect... I'm going to be doing this job next month. Perfect timing... Pun intended.
Love the detailed video not that I have chains, my 4.2 is belt, but I love to learn, THANKS.
interesting that you replaced the diamond disks, ive talked to multiple rebuilders here in the united states and none of them replace them unless they are damaged. another interesting note some of them reuse the cam bolts, which I can see as justified after some testing as that plus 90 only marginally stretches the bolt and the total torque is still within spec of the bolt by industry standard. Ill also point you to AMTuned here in the U.S. in florida, He remachines the factory cam gears for 300$ us, the work is quality and they are modified to provide better engagement to prevent the wear from occurring. Overall excellent video, wish i had this a couple months ago while i was doing mine. Cheers
Audi manual says the diamond washers and cam bolts are not reusable. Anyone reusing them does so at their own risk.
@@Heartbeat1991 I know what the manual says, the gentleman I spoke with who gave me that info warranties his rebuilds for 20k miles. I reused the washers in mine but did use new bolts
@@brennanlukas5467 that’s on Alex if he wants to warranty that.
First S4 I done was my own one and the intake cam did jumped🥲🥲🥲🥲🥲🥲🥲
@@VAGTechnic did it bend valves? ive heard that these are interference engines (and seen the proof) but mine has come untimed 3 times now with no valve collision. both my exhausts have come undone thanks to a torque wrench failure that was only caught after. and yes, you can retorque the intakes in the car with enough grinder action :) cheers
you better than the dealer, thanks
GLAD TO SEE YOUR BACK
too much work - editing to do ... but more videos coming this week
I didn’t see his back. 🤔
I m actually VW mechanic ... I'm sure I'll do well thanks to you .
the link is dead. can you update it? i plan on doing this to my own 2005 b6 s4
Best video on this subject I've ever seen, thank you! I love the way you present the part numbers too. Perfect! 🤗
Awesome now I feel confident in doing mine.
Brilliant video as usual Tom. 👏🏽 look forward to the next!
I've got the same engine and I love to remove it every 3-6 months for some maintenance ;-)
You look like you know exactly what you talking about so l will definitely will become your customer
Cool detail with the drill color matching the Seat 😉
Out of interest, which of the Audi cars (and their engines) have you found to be a) The most reliable, and b) The easiest to work on and rebuild. Love watching these rebuilds - something I would have jumped into doing 10 years ago, but not so much these days.
Can you do a quick video on how to check the functionality of the cam shaft adjusters in VCDS?
Great walk through on how to do these jobs 👍
perfect timing, just ordered my timing kit last week.
ps. is that serp belt routed wrong? I though it went on top of the upper pulley
the belt should be from the top of the idler pulley
@@remedia1200 yes. It’s wrong.
king of engines !!!! keep up the good work great videos respect !!!
Hi there
Been waiting for new video! Love your channel
Need to book appointment with gents to how a look on my SQ7 it's start getting funny and it's 100k on clock
Every time an Audi passes me I say A prayer for the owner.
I'd really appreciate a definitive list of which bolts need replacing and part numbers.
Update on the ebay listing would be nice
what a pleasure to see...I wish I could do it also but I can't know everything :)
could you please do a full tutorial on the b9 s4 timing chain
Brilliant video 👍
you would make a great surgeon
Thank you for a great video again.
It would be great if you can do similar video, Timing Chain replacement, for 3.0 TDI (CNRB) engine ? Thanks !
Great educational video very much like your content 👌👌👌
Great content in your video’s guys 👍👍
To the guy wanting to do it himself. Good luck
Nice! Monday Videos! almost to the 20K Subs you guys!
would like to get two more this week ... will see
Super video!
Best video! Thx
I tried your link, but ebay said it doesn't exist. Do you have an updated link?
That has to be the most complicated timing setup i have ever seen
Excellent video guys! I own an S3 and would like to see an engine timing chain done if you get one in your shop. Thanks!
Have a question, is there a brand of oil that would help fight against the leaks? Why do these engines leak so much?
Great video. I don’t think the spec for torque on the upper cam chain tensions is correct. The lower two are 10nm but the upper two tensioners are 5nm + 90 degrees. At least that’s what I’m seeing in the factory manual.
can you do a video on a 2014 audi a5 2.0t tfsi engine over haul .please......
What would happen if the timing marks for the camshaft intake and exhaust gears are not within the range? My shop says the exhaust gear is off by about 90 degrees. Car started and ran "fine", CEL P0018 G163 is active. Is there a way to know what damage has already been done?
Ive a B7 Rs4 and I want to change timing chain but I cant find the link, could you post it again? I love your content man, wish you were in South Africa, i want to rebuild as much as I can with this vehicle before parts are no longer available
Too bad you're not in the States. I'd trust you to do my B7 4.2 timing correctly the first time.
I know you are probably super busy, but please make more videos 😁😁
Two more this week is the target
Just a heads up, the ebay link is not working.
Hi .. do you ever made video on replacement of axle shaft seal in gearbox of Audi B8
In on first page!
As a bmw owner i feel like an imposter here, but enjoying the content nevertheless
Respect!!!
Hi veg , Do this engine have balance shaft timing mark or has to be time somehow ? Coz i watched so many video about audi but noone is talking about it.
Fcp euro got a good kit
Thanks for the video. I am finalizing a parts list for this job. I have the timing chain kit, but did not consider some of the external gaskets mentioned. Also, what kind of brake cleaner were you using? I used some to clean the front of my engine up and it doesn't quite have the finish yours has.
Awesome video. Engine out on my B7 s4 right now and about to do the chains. Quick question. When you tightened the cam bolts did you just use the cam locking plate to hold them in place? I heard it could bend the plate?
Just finished this up and tightened the cam bolts to spec without holding the cams. The chain and cam locks seemed to hold everything just fine.
tell me, what should be the tightening torque of the connecting rods in a similar BTR motor, there is no data anywhere, thanks in advance
Hi guys, can you make a new link? old one is not working anymore
Hi,
vagtechnic.uk/collections/all
what was mileage of the car?
Hello, Have you done a 4.2 BVJ engine timing chains etc. Are they prone to failing too? sorry I did see S5 FSI timing replacement on here.
Great video! Would you recommend to replace the 2 "in between"-wheels that connect the camshaft chains with the crankshaft?
In this video you seem to reuse the old ones but I have a cost estimate workshop that wants to change them out. Too bad that I don't live in your area.
We never change them
Sorry need to ask about the silicone, its name type and part No if you can plz>>>
Last Audi V8 I had was the ABH V8.. It burnt more oil than a TDi - it was 60 liters of gasoline and 1.5 liters of oil in the engine.. I guess thats what 300.000+ km does to a aluminium engine block.
its the nikasil coating whats the issue
@@VAGTechnic or rather, the lack of nikasil in my engine.. :D
Ding ding, first 5 minutes!!
Skip the first 5 minute … just some guy talking nonsense
What's the price for this job ?
all sproskets no need change?
What about the bns rs4 4.2 ?
Never will do myself.🤣
Can you do 3.0tdi ASB?
Hello, I have a question about 3.0tfsi 333hp engine. I've changed crank vent,new cover gaskets, new spark,coils etc. Now when I push hard gas I have error p0420 and p0430 at the same time(catalic converter). When I drive calm no errors. I need to do 6000km for a vacation,if it safe to ride with this error or I can damage engine?
Very Entertaining Video👏
What age & mileage is this engine 🤔
Any chance you could update your part list link? My A6 is due for timing overhaul. Would be nice to know them parts list 🙏🏾
Check vagtechnic.uk
@@VAGTechnic thank you! Y’all ship to the US right?
Hey fellas the link to ebay parts is not working do you have an updated one ?
Www.Vagtechnic.uk
Is this 3 litre? How is the 4.2 engine? Reliable?
I have a question? How to line the chain timing marks up. Where I live there is no manuals available. I watch a lot of your videos and haven’t seen how to do that parts of the timing marks if there’s any! I seen how to put the cams and crank in time but just not sure about the way the chains go on. Thanks
This engine Don’t have any timing marks
What a nightmare of chains, guides and tensioners. Another wonderful design from Audi. YUK!
😂😂😂eezy peezy yeah right 😂😆 ok il watch
link not working for ebay? still available?
vagtechnic.uk/products/audi-s4-v8-bbk-genuine-timing-chain-kit-rs4-upgraded-guids
Is this the same as a B7 RS4?
Similar, not same
There is no balance shaft. If there was that would need to be locked in time also.
True , Dont think we had it ever out 😂 you know for what it is ?
@@VAGTechnic there was a diesel V8 that used the same block. That had balance shafts.
There’s two holes at the 4 and 7 o clock positions below that gear. Sometimes they have a block off plate on them, some do not.
The upper gear and pedestal are replaced by a gear with a balance shaft gear drive for the two balance shafts on those Diesel engines.
Can you recommend car part web page ? Thank you
www.ebay.co.uk/itm/Audi-S4-V8-BBK-Genuine-Timing-Chain-Kit-RS4-upgraded-guids-/175092988430?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0
..Just out of curiosity how come Lexus ISF V8..don't have this Plastic problems with their Timing kit?🙏
Niceee…:) 🤟🤟🤙🤙🥂
From what company do you buy original vag parts? From a dealer or some other company?
In U.K. it’s called TPS for trade only .
We have the kit available if someone need it
www.ebay.co.uk/itm/Audi-S4-V8-BBK-Genuine-Timing-Chain-Kit-RS4-upgraded-guids-/175092988430?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0
I’m late to the party, but the link doesn’t seem to be working. Is there somewhere else I can look for it?
зделан как часовой миханизм
Tool number 1 - a ramp?
What percentage of these engines will have this problem. Someone needs to do a foi request to VAG to see how many chains they have sold.
Every last one one them. Very rarely do they get over 145k.
I’ve seen them go as soon as 73k. I’ve heard of them going as little as 40k.
Is Audi a manufacturer with a lot of timing issues 🤔
theres a non running s4 in my area that someone wants $950 (us) for, this is the second time ive seen it listed this year-it was listed at $1200 a few months ago until it sold to the current owner.
how bad of an idea is it to buy the car as a project?
+1
Bende seni yanıda calisa bilirmiyim Türkiye den gelecem
❤️🇮🇶
Would someone like to send me the needed list for my 07 4.2? The dealer want's $3,100.
Must cost a fortune.🥴
Horrible engineering 😂
tsa2vt
vun.fyi