2023 Beta XTrainer : Enduro Engineering Clutch Cylinder Guard Install. Part # 13-400
HTML-код
- Опубликовано: 7 сен 2024
- Beta Motorcycle Clutch Cylinder Guard 13-400:
-Saves your slave cylinder and engine case if you throw a chain or fall on a rock.
-Offers great peace of mind.
-Please note, will not work with 15 tooth sprocket
BETA PARTS 🛠️⚙️- Choose "3 Seas Recreation" for your Beta parts! Customers can now order all Beta parts and accessories directly from the Beta USA website. All parts inventories are in real-time. Customers can choose shipping options and the best part, selecting their preferred dealer.
Why choose 3 Seas Recreation as your preferred dealer?
-We have spent over $40,000 this year alone on our race team, all of which are on Beta Motorcycles.
-We have produced over 300 "How To Beta Videos". All free to the public.
-When you choose "3 Seas Recreation" a portion of that sale will come back to our shop, all profit goes back into our race program and our RUclips videos.
-Since 2011 we have been a pioneer with the Beta Brand in the USA and spend hundreds of hours giving advice over the phone for Free.
-We are BETA ONLY when it comes to Off Road Dirt bikes, all of our attention is on Beta!
-We take brand new bikes out of the show room and give full riding videos, none of this is backed by the Factory or Beta USA
Beta Parts Link:
betausa.com/ac...
-------------------------------------------
NEXT LEVEL
🔔 Hit the bell next to Subscribe so you don't miss a video!
👍 Like Our Videos
💬 Comment Below
🏍️ Enjoy The Ride, Jared
-------------------------------------------
#EnduroEngineering #Beta #XTrainer
Choose "3 Seas Recreation" for your Beta parts! Customers can now order all Beta parts and accessories directly from the Beta USA website. All parts inventories are in real-time. Customers can choose shipping options and the best part, selecting their preferred dealer.
Why choose 3 Seas Recreation as your preferred dealer?
-We have spent over $40,000 this year alone on our race team, all of which are on Beta Motorcycles.
-We have produced over 300 "How To Beta Videos". All free to the public.
-When you choose "3 Seas Recreation" a portion of that sale will come back to our shop, all profit goes back into our race program and our RUclips videos.
-Since 2011 we have been a pioneer with the Beta Brand in the USA and spend hundreds of hours giving advice over the phone for Free.
-We are BETA ONLY when it comes to Off Road Dirt bikes, all of our attention is on Beta!
-We take brand new bikes out of the show room and give full riding videos, none of this is backed by the Factory or Beta USA
Beta Parts Link:
betausa.com/accessories.html
-------------------------------------------
NEXT LEVEL
🔔 Hit the bell next to Subscribe so you don't miss a video!
👍 Like Our Videos
💬 Comment Below
🏍 Enjoy The Ride, Jared
-------------------------------------------
Love the content!
hi thanks for all the vids youve been a real help i have a 70 plate xtrainer with only 18hrs i recently took the stator cover off to clean inside and noticed that the flywheel as a slight play up and down is this normal or is it bad case of main bearing issues any help would be greatful
Pro tip. Gloue those spacers with CA glue, and then you will be able to slide this bent guard with spacers in their slot
Nice idea! Luckily I got it on the first try! Enjoy The Ride, Jared
It looks like that bar makes it nearly impossible to drain your float bowl easily. Might not be an issue for most guys though but we do a lot of deep water crossings and it's nice to be able to clear water from our carbs easily. I really wish the PWK carb had the same drain bolt as an FCR carb.
What is the cost of this Enduro Engineering product, for the XTrainer?
Unloosen, is that the same as tighten?
Possibly, if it doesn't work for you try going the other way lol
2:22 Un loosening is tightening. Just saying.