How to fix a broken headphone jack
HTML-код
- Опубликовано: 11 дек 2017
- Shopping link*:
🟢 Replacement audio jack: amzn.to/3wvSxld
If you have a pair of headphones or speakers with a faulty headphone jack, this video is for you. Here are two ways how to fix a broken headphone jack. Repairing it is easy if you have a replacement headphone jack and a soldering iron on hand.
*Affiliate link. The price you pay stays the same, but I may make a small commission. Your support helps me make more videos. Thanks
#DIY
#HowTo
#repair Авто/Мото
POV: you looked this up knowing you don’t have the resources or knowledge to actually repair your headphones but wished to give yourself one last bit of hope before throwing them out.
Bruhh these headphones cost me 70
My POV: ok I think I have every thing I need him saying then expose the wires carefully me trying to figuring out how for 2 hours strait figuring it out then looking I cut all the witres in the process
Na cause I feel like I'ma mess up for just cutting my headphones
My Pov:I just freaking bought these headphones and the jack wont freakin work so i searched it up on how to fix it, For the love of god my jack started working again idk how but it just freakin happens
Cries
I found those replacement headphone jacks to be a pain. I was getting the wires twisted inside and even if I was lucky to get it soldered. What I did was get one of those 3.5mm to 3.5mm extenders and cut it in half. Then solder the two cables together. Less frustration messing with the actual jack.
i dont hear sounds cause my headphones is broken...
SeptaGintaQuinGent ok
@SeptaGintaQuinGent how do I fix a earphone jack?
Same
@Arekusa same
same
I chuckled when the first one turned out to be garbage.
Facts 😂😂😂😂
Yo man this was great, I just did what you said and it worked and my speakers are much louder than they was thanks
Broooooo those speakers were the OG's of my childhood
@@Nobody-qr4cx everybody has em idk why
ROBLOX'S BIGGEST FAN it’s an old picture of a guy who made a stupid fortnite song, I forgot the name of it
Metro Oh yeah yeah
My mom used to have those speakers at our old house when we had a computer than ran windows vista
bro ur a bot or a kid
where have you been my entire afternoon!!?? THANK YOU!!
Great Lesson
Thank you
thank you massively for the help.
Imagine cutting the cord every time like if you’re sharpening a pencil. Then you still end up using it when it’s a little nub.
Don't get why people would take their time to dislike videos such as these where they're trying to help!! If you don't like em, DON'T watch em SIMPLE!
Pfff the good old days of dislike buttons
@@akramsaleh8420 lol
Well... It's a really nice video with great tips, IF you have a soldering iron and the skill to use it.
The multimeter is a nice-to-have instrument, too.
Luckily, I happen to have both the soldering iron and the skill to use it. But I know it's not the case for many.
So, guys, I suggest you to learn how to use a soldering iron, not only for this video but for other purposes in electronic as well. If you can afford a multimeter (even a cheap one), it's a good thing to have, too.
my teacher let me use the soldering iron in my school lmao
You'll save a lot of money by knowing how to fix things..
@@Jiglias that's great!
@@bigchainring1977 indeed
what to do with the multimeter I bought and don't know what to do now my headphones are working but the sound is so low they were very loud when they were new.
Thank you so much
This content is what I'm searching for.
Why not just resold the cable on the jack tip?
Had to see and try this because no other option in this lockdown😓
Did it work
Did you do it?
Thanks!
My left ear loved this video. Although, I did get a little carried away and ordered an almost identical replacement jack only to later hear that it was crap. Nice.
Same mate i cant hear on one ear after it bent for me
@@alankowalski2023 my headphone jack got bent because i'm clumsy not i have to bent the dang wire so I can hear
Great vid thanks! :D
Do you know how to fix low sound from rear speakers in surround sound that would be connected via headphone jack 3.5 mm to an older tv? Sound is coming out of some 5.1 logittech PC speakers but they work fine. They work okay except the rear speakers are very low sound. There is no receiver involved so I'm not sure how to increase the gain on the rear speakers.
thank you very much
Welp I'm poor and covid is around the corner I can't go outside fck
Online shopping 😉
@@Malottter he said he's poor so stfu
@@supreme20 He doesn't have a single dollar?
That's tuff
@@supreme20 calm down kid
Where (UK) can I buy a kit complete with glue/heatshrink wrap etc?
So if you break the thing with the sleeve ring and tip, can you fix that or no?
Tnxbrother ❤👌
Thanks
I just cleaned and twisted my headphone jack now it works fine again :D
What was the problem before?
@@gl_1660 i dont remember commenting here
@@frns_lmaostill remember it?
@@aestheticaledi5506 strangely enough, I do, lmao.
Quick fix just smush the end with plyers so that the its keeping pressure on the back conection , either way if your cutting it off worth a try before. Mines works good enough to have some tunes in the garden LOL
Good video.
"You can get one for $1" but you also need all this equipment that no one normally has.
if you don't have solder you shouldn't be attempting to fix anything with wires
you are a loser
can you do the project using electrical tape to connect wires as I don't have a soldering iron
This is the headphone plug, the jack is where you put the plug in.
i literally bent my headphone jack and bought a new one 2 weeks ago. and done the same thing again £50 down the drain
Me everytime i bought a new headphone
I broke to recon 70s in less then a uear both from bending the jack
Same
Can you do this with any type of headphone?
I had an issue with those cheap headphone jacks. I took one of my headphones for repair and the person who did it replaced the nice Philips jack with one of those. Now there's a weird phase cancellation effect in them. Will get the jack replaced soon. Make sure to shell out just a little bit more money on the parts you use! lol
Sounds like faulty ground. You're right, don't buy cheap replacements like I did.
@@LeftyMaker Hey, man. I'm not dealing with a broken pin or wires from the plug that connects to my security camera system but the plastic of the plug itself that secures the connection of the metal is bent on one side, making the fit onto the motherboard's port too narrow.
How do I fix this?
If I bend the plastic to not be narrow it could damage the metal inside making the proper connection. Also if I attempt to shove it on there that could mess up the port from the motherboard.
I hope you can help me solve this, and thanks for reading
If i buy adapter will it work fine?
Mu headset for gaming the Jack is broken is it able to be fixed ?
I got this Usupso headset as a new years gift but unfortunately as you can tell it's only been a week and the headphone jack is already very sensitive and it doesn't turn work unless I tweak the jack
Awesome
Mostly off topic but still gonna ask this question: I have got a 3.5 mm jack to 6.3 mm jack reduction which is a bith loose and when I use it with my headphones the sound is either silent completely or the balance is not the best, I know I could fix that by using ducttapeing it around to make it more attached to each other and believe me I have tried that 2 times already! What would be the best way to connect them properly so that I can have the best sound-check?
That is likely a bad electrical collection. The best thing would be to do this:
You need to determine which one of the headphone jacks is the bad one. To do it, you need to cut the cable in half (doesn't matter where exactly), you need to get access to the wires to check the connections.
Then, once you have two pieces of cable (I promise it is simple), you just check the conductivity of the channels with the multimeter. Right channel, you check all three wires to find it on the other side, found it, multimeter beeps. Same with left channel and ground.
If one side works completely, check the other one. If that is bad, get a replacement jack and replace the headphone jack on that side.
Can I use electric tape instead of soldering
Can you just solder the wires together or do you have to do all of that?
Can I use a headphone jack for my stereo speakers?
Recently my headphones only display the sound on the left side
Does this help with that?
Everybody is talking about jack repair but my problem is not jack, it's headphone slot. When I plug a jack into a slot I won't have the sound until I stretch the jack into particular direction. Holding it like that and the sound is on but when I release it the sound goes off. It looks like physical damage within the slot. I have no idea what to do. Any help?
this is the only time Closed captions are useful
Cheers
Frm where did we ger another jack indiqn price?
I think my problem is even more basic than this: after a few months, every plug-in jack (Apple, old headphone or speaker jacks...) get sketchy, so I have to hold it in one position, or I get no sound. I try scraping the connection with a paper clip in case it's dirty, but that doesn't do much good. It happens with chargers also, in the sense that they get very slow, then stop charging after a few months.
It's got to be something I'm doing wrong, but I can't figure out what or how to fix it. Any reasonable suggestions welcome.
In my case both jacks are broken.
Awesome my high end $300 balanced cable suddenly stopped working on 1 channel, i have to bend it at a 90° angle for it to work.
I thought the jack was the port it plugs into, not the plug itself? Anyway, good video, but not what I was looking for
See? Now somone is making sence! Let me try this! I can emagine this will work
Lmao broke my brothers headphone jack in half and one side of the headphone doesnt workthat cost literally 20 usd so i will buy a new one
Hybrid - Minecraft bruhhh me too but they cost 80
i've gotta tell ya man, these things break too easy. as in, i can get a new cord, but it wont be the same.
Lol just found out that my headphone jack tip was a bit out of place, moved it a bit and it worked
Gonna say quickly this comment saved me some time. Saw it right as I opened the video, and tried moving my actual jack instead of the soft stuff at the end and it worked.
my jack always bend because my siblings always misplug it and it always broke(already 4 broken headphone jack), if it is out of place and u moved it , the wire inside might disconnect to either one of the side and u will hear it one 1 side only
Omggg it’s those speakerssss!!
Ive got a green, copper looking, red, and blue ish on one. And my other one is just blue, copper, and red
I have 3 aux cables and all they dont work but i tried this i cant do it bro well.i will buy new aux cable the day after tomorrow it is something like 2 3 dollars here I will let you know if it gonna work if the aux cable was the problem or something else see you in 2 days
what if we dont solder it, and just bind it together ???????
i have the same speakers i found them and they are old
Is there another alternative to shrink rap?
Brother can I use another brand headphone device jack in my broken brand headphone device jack reply me as soon
yes brother
Boom my headphone got fix while watching this video. I just twisted the cable and it worked 🤣🤣🤣
sounds too easy..
Every aux cable I buy in like 2 months the sound only comes out one side and I have to bend it weird
My left channel wire wasnt working on my jbl tune 100
All my indians are doin good here
I need help I’m on Xbox and the thing that you plug into your controller is bent a want to talk to my friends help
Bruh same
So.... I can assume that someone is watching this without any sounds
oh boy i sure love watching this video with no sound
People are always using jack and plug interchangeably. What you have replaced here is the plug. I imagine a jack/port is a much more difficult thing to replace if that's the source of the problem.
Oleg !!!
if in your case you get the super small cables just melt it off with a lighter its much simpler that's how i did it
We need Radio Shack back!!!
Bro can anyone help my headphones inserting pin is tilt that's why not able to listen audio
my headphone jack isnt working so i clicked on this video and realized how stupid i am when i was confused about not hearing the video
Mine is still good but the ring 1 the metal of it has scrap
What are in the thumbnail?
Does this work with a headset?
idk
Got 3 headphones to fix but I don't have soldering iron yet so Im just gonna wing it with eletrical tape lmao. Took some headphone jacks from my Systems class though
did it work because i need to do this with my headphones btw if you reach out thanks man
Tysm now I can fix 2 of my headphones which both broke by the headphone jack
I tried watching this with broken headphones lol.
This guy sounds like Oleg from the TV show 2 BROKE GIRLS.
Im super confused and I need help.. I can hear audio but not enough and my google audio is all the way up and Ive tried everything!
@Imaan Zahra The problem with you too is that your headphones are connected but not enough. Not enough data or whatever travels through
How to fix : cut off welpz it kinda help I'm broke but probably works.
Just change the aux cable
This is why I use wireless headphones
what phone is that?
OnePlus 5. I don't think they sell it anymore
How do I hear this if my jack is broken?
Can I use duck tape instead of this sodering stuff?
There is hopee 🥳🥳🥳
Accidentally broke the plug of my father's headphones, I hope he won't notice 😂
i did this but the mic doesnt work and i dont know why
Seems like the splice is way easier.
Can someone help me? My headphones are kinda a problem...so there is a string on the cord that helps me hear in my headphones and the headphone jack is loose and I need to hold the string to hear and the audio is so low now... help
NickRichardson he or she still needs help tho I have the same thing
@NickRichardson shut up
@NickRichardson you.
Littlerly everyone on yt is saying mean things to be be quiet I been through enough and don't correct me
@NickRichardson what??- I didn't watch it I just commented so someone can help
Don't know how people don't know this lol.. but also make sure the gauge if the cable matches somewhat or you could lose significant sound.
Well idiota here who say buy a nee one...these video is not for garbage quality headphones...when u have a very good costly pair of headphones and after heavy usage of those for several months ,u will break the 3.5 mm jack with may be harsh force..u will not again buy a costly headphones just for a pinproblem...insted u can repair it cheaper and use those headphones still further...
Pov: you searched this up even tho you knew you didn't have the knowledge or resources bc you bought sum expensive shit and now its broken already
But why do these audio jacks fail? Whats the problem with them?
The copper wires inside them are extremely thin. If you bend them a bit too hard, they will snap and stop conducting.
@@LeftyMaker so my suspicion was correct, these things are designed to fail aren't they?
I bought my new headphones 3 days ago... and they are broken already...
my dad bought me these headphones and i dont want him to know they broke.
my ring 2 connection of my headphone jack is broken
just get a 3.5mm extender and solder or twist the wires lmao