2011 Hyundai Sonata 2.4 No Check Engine Light P0650: Malfunction Indicator Lamp MIL Control Circuit
HTML-код
- Опубликовано: 8 июл 2024
- Join this channel to get access to perks:
/ @robertdotterer
Today we have a 2011 Hyundai Sonata 2.4 that will not pass state inspection because the check engine light is not working. Follow along as we go through the process of figuring out what is wrong with this car.
Codes:
P0650: Malfunction Indicator Lamp MIL Control Circuit
Tools Used:
Launch x431 Pro Mini 3.0:
Launch Discount Code: BXF6NMMG5Q16 save 10%
Buy Launch Here:
kingbolentool.com/?ref=fQ7GVd...
Support Group: / 370367330293683
ZCT1012C - Mini Bulb Remover/Installer
webcat.cornwelltools.com/ZCT1...
0:00 Intro
0:30 Confirming The Complaint
2:40 Looking at Cluster Data
3:05 Looking at the Wiring Diagram
4:37 Checking Fuses
5:14 Taking the Cluster Out
7:00 Bulb Inspection
7:50 Confirming the Fix - Авто/Мото
good to have you back😊
Thank you!
You saved me some money.! Thanks for the video!👍🏼
Glad I could help!
Robert Dotterer
Thank you God has bless you
INTELLECTUAL Robert Dotterer
From Nick Ayivor from London England UK 🇬🇧
Thank you for taking the time to watch!
The key stuck in the ignition is the switch on the passenger side of the shifter. The metal Tang can be bent one direction to make it close the contact.
Thank you, I took a class on fixing these.
What type of bulb is that, so I know whay light p74 or what not to buy at autozone or off amazon
I think it was a 74.
I got the same code p0650 MIL control circuit is that the bulb problem or wiring?
Only way to know for sure is to do some troubleshooting.
i didn't know they were easy to remove
I didn't either
That's known as a "286" bulb over here. But a conventional bulb on a 2011 when all the other warning lights are using LEDs? Weird!
Can the check engine light bulb actually keep the car from starting?
I've never seen it happened but I would say there is probably some odd ball car out there that needs it.
My car has been burning hell of oil, but there isn’t a check engine light on?
You won't get a check engine light for oil consumption. You will get one when the oil consumption damages the oxygen sensor and or catalytic converter.
got the same P0650 code with check engine light always on. any fix ?
Have you performed any tests?
@@RobertDotterer well the engine light is back to normal. it shows at ignition then goes away
You still should test it or try a new bulb.
@@RobertDotterer well got it again after a whole day. Now there are 2 error codes. P0650$07e8 and P0650$07e8PD
I would buy a subscription to service information and look up the code definition and code setting criteria and form a diagnostic plan from there.
👍🏻👍🏻👍🏻👍🏻