Trash To Cash! Knifemaking / Restoration Of The UGLIEST Flea Market Knife Ever
HTML-код
- Опубликовано: 16 янв 2020
- Install Raid for Free ✅ Mobile: clcr.me/FgR8TQ ✅ PC: clcr.me/iCqSNt Start with💰50K silver and get a Free Epic Champion 💥 on day 7 of “New Player Rewards” program
Yes! Another knife restoration. I love making this kind of projects!
This rusty old knife came from a recent visit to my town sunday flea market, needless to say I paid pretty much nothing for this. I guess it's no surprise, not many would buy something in this condition right?! But I knew it had potential. Under rust, dust and bad welds the steel is nice and hard! (between 50 and 55 Rhc) We can even see a hint of a makers mark, unfortunatly incomplete, so I am not able to discover when and where it was made and for what specific use. Still cool!
For the handle I used: stainless steel, ebony wood, white felt liners, stabilized cork and stabilized curly maple (I think it's maple, not sure).
I just started to list some of the stuff I use for my projects in this amazon storefront:
www.amazon.com/shop/blackbear...
It's affiliate marketing, so if you order something from here you'll help the channel for free! Thank you!
Here are some of the videos where I go in more details about tecniques and tools used in this video:
Stabilizing wood: • Stabilizing Wood With ...
Vacuum pump and chamber used to stabilize: • DIY Vacuum Pump And Ch...
Felt liners: • Felt And Resin Liner /...
Stabilized cork: • Cork Stabilization IKE...
My lovely drill press: • ROSA Drill Press Resto...
My lovely buffer: • 1950s Italian Bench Gr...
Ind ex of operation and materials:
0:30 Weak welds, easy to break loose
0:54 Electrolysis: water and sodium carbonate solution, parts connected to negative side and steel sacrificial anodes to positive sice of a DC power supply (car battery charger). 2-3 hrs at 5amp.
1:17 Remove patina with steel wire brush in water
3:16 Cut off disk on angle grinder to remove ugly welded tang extension
5:05 Remove rust and patina with steel wire wheel on bench grinder
5:17 Fill old pin holes with stick weld
6:12 Transfer design with paper template, small magnets and random spray paint
6:31 Re-shape on 2x72 belt grinder, edge kept cool with water bucket
7:18 Round cornes with die grinder and stone bits
7:40 Grind new bevels on 2x72 belt grinder, edge kept cool with water bucket
8:00 Hand sand to 600grit sandpaper
8:20 Etch in ferric chloride
8:30 Satin finish with fine steel whool
9:06 Notch onthe tang for glue to grab later on
9:50 Cut materials for handle stack
10:16 Grind faces flat
10:46 Glueing the handle stack with 5 min epoxy resin
11:19 Grind square
11:38 Drill tang hole, 10mm in diameter
12:17 Mark and center puch guard holes
12:40 Drilling with 3 mm bit
13:06 Grinding back side with dremel to save some file work
13:38 Filing to size
14:05 Tang dowel took to the exact diameter by spinning on a plate with hole drilled with same bit as the tang hole
14:20 Splitting the dowel
14:32 Enlarge the slot to match the tang thickness on slack of 2x72 belt grinder
15:00 Final glue up with slow setting epoxy glue
16:00 Squeezout cleaned with nitro solvent
16:18 Grinding handle to shape on 2x72 belt grinder
17:00 Hand sanding up to 600 grit
17:34 Boiled linseed oil as finish
17:54 Sharpen with MadEdge sharpener
18:23 Strop on leather with fine polishing coumpound
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
★Patreon★
/ blackbeardprojects
★Website★
blackbeardproject.com/
★Follow me★
Facebook ► / blackbeardprojects
Twitter ► / blackbeardproje
Instagram ► / black_beard_projects 
Хобби
Install Raid for Free ✅ Mobile: clcr.me/FgR8TQ ✅ PC: clcr.me/iCqSNt Start with💰50K silver and get a Free Epic Champion 💥 on day 7 of “New Player Rewards” program
what sharpenning system is that?
You made the tang too weak.
Always over engineer.
how bout no should be called raid garbage legends
what sharpener did you use Black Beard Projects
Understand that he's being paid by Raid, but do not actually install Raid. Raid is trash, meant to farm idiots for microtransactions in a "game" that is no fun at all.
It would probably be wise to get sponsored by a company that makes sanding belts... this looked expensive.
Yep, better than to advertize a pay2doanything game...
KYŌDɅI KΞN I see them so often, I just reflexively fast forward through them anyway.
@@tommyhill199 Yep, same.
! SILICON ! - Carbide Legend !! download and play free now !
@@kyoudaiken this comment was sponsored by RAID SHADOW LEGENDS!
Tomatoes and arm hairs is a typical italian dish.
Can't confirm or deny
Black Beard Projects I can confirm
Don't forget the olive oil and Gouda.
Female arm hair is really the best! LOL!
It is bruh
Putting a dowel on the tang for an easy fit up is such a clever idea, I've watched so many knife making videos and trying to cut out a perfectly rectangular hole for the tang is always something that invariably goes wrong and takes ages. What a clever idea!!!
Indeed. But an easier way would just be wrapping the tang with electrical tape. At least that's what I do.
@@alanbrunner4116 intellectual
I always fill it with epoxy and pin it.
The reason this isn't done is because its mechanically unsound. The only connection between the tang and the handle is the glue/epoxy between that dowel and the handle. Bang it a few times and that connection will break resulting in the knife handle coming free of the blade. It will either start to turn, or come flying out during use. There needed to be a set of pins through the tang to hold everything together mechanically.
@@mizinoinovermyhead.7523 Been making knives since 1992. No failures yet. Remember the tang is sitting in solid JB Weld and a hardened pin. It isn't going anywhere.
18:40 I THOUGHT HE WOULD CUT HIS OWN ARM TO SHOW HIS MASTERPIECE, LIKE A FREAKING VIKING.
Habce WHY ARE YOU SCREAMING
WHY ARE YOU BOTH SCREAMING
WHY ARE WE *STILL* SCREAMING
**!CONFUSED SCREAMING!**
WHY ARE WE CONFUSED AND SCREAMING
I wasn't keen on the handle....until it actually came together and was on the knife. Then I loved it. Great vid!
Michael Moss I’ve noticed handles are usually the main sticking point in knife restoration videos. Probably because a sharp blade is a sharp blade, but handles are more specifically aesthetic?
Beautiful restoration and modification. Brilliant solution for the tang. I'll never forget the work that you did on the Slavic razor...nothing else like it anywhere! When you finish a piece I always find myself thinking...'I sure wish I had that.'
How clever is that! The split dowel for handle fitting, and the jig for sizing the dowel... Brilliant!
WOW!!! When I saw what was left of that tang I was so curious about how you were going to repair it for the handle... as always... absolutely beautiful sir!
Initially it looked like something you'd find under an inmates bed in a Thai prison. End product was outstanding.
Made from a metal bed slat 😂😂
@@zxg77215 its just a joke man. I live in Chiang mai.
Just like me, at first sight I thought "nah, that's coming the first bad video from him". At the end "wow, totally worth to watch till the end"
@@zxg77215 Relax, it's a joke. Don't bring racial politics into this. It's all fun.
Yea I get it is a joke, just want to dig up some story or sort.
Please allow me to delete the above comment to avoid further concern, and sorry for causing any trouble. :P
I literally can't get away from Raid Shadow Legends, they're gonna start advertising in my dreams next XD. Its cool you're sponsored though.
Ahah! Thank you
By now you've probably already heard about Blue Apron....
Don't ever use XD you 62 yr old virgin.
Right when he started talking about raid I saw this comment 😂
Seriously though like about every single video I click on it’s sponsored by raid
You can get away from it...it just cost 11.99 a month 😅
Saubere Arbeit! Das tadellose Ergebnis spricht für sich!
Die Klinge faktisch mit einem Dübel im Griffstück zu befestigen ist ja mal eine ausgefallene Idee. 👍🏻👋🏻
It's so jarring hearing one of these restoration channels actually talk. Like, literally none of them actually talk while they're doing the video
Breaking the rules
It's the easiest way to do it. Perfect for an antisocial fuck like me. Maybe that'll be my channels name.
I can never tell. I always mute the video.
Mom: You can't play Fortnite today.
Every single 10/yo: 7:16
This comment is underrated
I don't understand what you mean
@@yazanm70 listen the sounds look like screams of the boy who's like "eeeeeeeeee I wanna playyyyyyyy"
hahahahahahahah
KEKW
That was the most complicated way to cut a tomato I have ever seen!
O. L. I know 😂 every cut was wrong!!
@@Crazyknives 😧
Lolzzz 😂
That was something but it certainly was not a tomato.
It’s good to see that you still can’t chop tomatoes 😂
Right? I'm like "this dude knows how to make an unbelievably awesome knife out of a piece of garbage, but he can't sharpen it properly?" :D
@@WandereringFamily123 It seemed rather sharp to me. Am I missing something? The shave worked fine, and the tomato cuts were clean. Heirloom tomatoes are rather difficult to get thin neat slices of.
It slices! It dices! It makes Julienne fries!
@@jeffr0 And wait! There is more! It also stores easily under your bed! Don't wait, there are only a few left! Only $999.99! Call your local number NOW!
I think that knife is begging for a 15deg hollow ground bevel. I bet the tomato slicing would go much better.
There is nothing like watching a master at his craft. Epic job.
Have you ever thought about silver soldering the joint between the bolster and the blade? It would keep bacteria from growing in there. And it looks very cool. :) Enjoyed your video! :)
I would be the guy that took a hard pass on that knife at the market, never seeing it has potential. That turned out amazing.
love the knife but seriously excited about the heirloom tomato.
One more masterpiece was born from scrap. Thanks a lot!
That tiny tang breaks my heart. You did what you had to do but damn.
I´m in love with this knive!
That one mosquito in the middle of the night: *4:54*
Always so rad to see people breathe new life into old things, and give broken tools the ability to do their job again. Awesome video!
They way you put your arm on the table after you've sharpened the blade is kinda scary :D
Also slightly triggering for people who self harm...😗
It would be nice to know when is the right time to use a sandblaster vs rust remover...or can both be used in each case? If yes then would it not be faster and better to use sandblaster in the initial phase of the video?
Lovely work as always! Kudos from India.
I enjoyed this knife
Wow. It truly was trash to treasure.
I originally thought you'd weld on the needed steel, but instead...
The handle was beautiful. Loved watching every second.
This one was absolutely amazing
I love the way you keep the patina and not make it to a perfect shiny knife like most channels do
Carbon steel
Carbon Steel
Carbon steel
How does anyone hate this guy or his channel? This show relaxes the hell out of me. He's an excellent craftsman.
Nice job! I like how you put a spline inside of the scales to keep a tight fit. The wrought iron really looks great and works good for a chopper.
Are you telling me that Knife can cut a tomato? Outstanding.
New profile and finish look fantastic, although I’m concerned about the cuts you added into the tang. I know you added them to increase the strength of the anchoring to the handle, but it might also increase the chance for stress fractures to form near the cuts.
Leo Marrah, I wouldn’t worry about tomato cutting stress....
It could chop millions of tomatoes before the handle turns into sauce bruh...
Someone obviously once loved that knife enough to try and fix it multiple times. I'm sure they would have loved what you have done with it ❤️
That was beautifully executed. I’ve never been a fan of leaving pitting on a blade, (I’m a mirror finish guy), but on this knife it works. You’ve restored an old ugly blade into something of beauty and kept the character of the piece. Thanks, I’m learning a lot from you. 🇦🇺👍
13:55 waaaaw
Sex
That's hilarious.
That was the last knife I used in the Titanic it's crazy how somebody found it
"It's been 84 years..."
Wow. A piece of rusty metal restored to a knife I would never stop using. Fantastic .
Lovely restoration/complete remake. I think when you do something like this, you need to add a makers mark. Either brand the wood or etch the metal, just something to show future owners where it came from.
How much free time do you have on your hands?
"Yes"
YES
Very good job! 👍
You Sir are an absolute artist with these restores.
I'm impressed with the quality work. Even though you speed up the content, we get to see all the details. I like that.
Hey!!! If you want to know more about any particular process shown in this video be sure to check description, I always write a very detailed list of operations and product used. Also links to related videos that cover specific topics like making felt liners or stabilize wood!
14:05 I got to try this! Great Video
si
You probably been asked this 4 billion times but do you sell your restorations? And how much for this knife?
I love your work. Thx for sharing.
Hello there. What is the sharpening apparatus called, please? Really enjoy your channel, thank you.
Hey Black Beard. Did you ever find out what the stamped imprint on the side of the blade was from? I saw a faint one at 19:20 and 19:55.
Exquisite. Great composite for the handle, made the whole thing look absolutely elegant.
I love that handle! The insert idea was awesome to watch you come up with. Thanks for the awesome work.
that is the smallest, saddest tang i've ever seen in my life
Yeah I thought the same but I guess it isnt a combat knife so fair enough
My girlfriend 2020
Segio Siea lol rip
dangerously small
That's what she said
Beautiful restoration. I was happy to see you scrubbed the rust away with a proper brush, not a toothbrush as I've seen on other channels. It drives me bonkers.
ben candelaria Ya right 👍🏻
Please sign your work ,it is art !
Thank you for the inspiration. I have one of these that is in need of the same treatment
In the condition it was in, it would've probably been cheaper to make one out of a lawnmower blade. Lol
Shaving arms and cutting paper is so 2019.... To REALLY prove how sharp it is, trim your toe nails. That will be avant garde.
Nope, gotta shave your pubes. 😵😄
It literally shows the amount of quality of edging and sharpening that comes out in his craft.
Nice fit up on this piece 👍
That handle looks amazing, but I’ve never been a big fan of leaving the pitting from the rust on the blade.
looks cool but not wise for kitchen knives because the pits hold bacteria.
bro how u gonna raid shadow legends me when im trying to chill watchin my no-dialogue workshop videos.
my man's gotta make his money right
Props to RSL, they can't make a good game, but they singlehandedly fund half my RUclips experience XD
Nicely done as usual! I was kinda hoping you'd do that kind of tang, it's been a little while. Handles are always looking awesome too, the contrast between materials just looks amazing every time.
You should never use gloves with wire wheels because your hand can get caught up in it and mess your hand up
Raid Shadow Legends claims another victim...
Another gorgeous knife. I love the stabilized cork in the handle. What is the black material though?
I'm not even into "knives" and I sit here in awe at your work. Not only are they beautiful but, you build them to be strong and trustworthy.
You have my respect Sir. I wish we were friends =)
This guy really likes to make a tomato salad.
was this thing found stabbed inside of a bear or something?
Love the knife and how you restored it with the most amazing handle
GREAT RESTORATION!!! as usual, beautiful Knife!!!!
Man, doing Raid ads must pay pretty well, seeing how everyone universally knows it's shit, but every content creator on RUclips still does the ads
Well with RUclips deciding they want an ever increasing share of the add money, content providers are doing what they can to make ends meet. Pretty sure they enjoy making these inviđeo adds as much as we love watching them. Better than loosing content like this. But ya f¥ck Raid SL!
Raid shadow legends is actually pretty decent.
Michael Myers called. He wants his knife back.
Oh my god that handle is so beautiful. Great work!!
that handle turned out beautifully, i was pleasantly surprised. Great stuff
Raid has claimed another youtuber :"(
With how Google is taking things, sponsorships are really the only way for creators to earn a decent amount of money. It’s a shame, but business is business I guess.
18:52 where did you get this Tomato from, Chernobyl?
Love the video
A brilliant resurrection of a desperately damaged blade. The finished knife is outstanding!
I like that you actually save those tomatoes for later, not just smash them to pieces.
E' un ragazzo giovane, sa fare qualcosa.... Secondo me qui si parla di "eccellenza". Punto.
Concordo al 100%
Qualcuno sa dirmi in che cosa immerge il coltello al minuto 8:20 ?? Grazie
At first that thing had so much rust you could get tetanus from just looking at it
I think he had his tetanus protection goggles on :p
Awesome finish on the blade I really liked the darken steel look! Well done!
Such a beautiful work! Love it.
14:05
This scene approved by Ministry of Sexual Innuendo
Hentai
I think that's the ugliest tomato i've ever seen
Heirloom tomato. They're ugly, but super tasty.
More reincarnation than restoration 😂love to see these old life’s been repurposed, some nice ideas I’d like to try myself 👍👍👍
You sir area man that restores with no fear. Outstanding job!
Wow. That turned out beautiful!
Lovely restoration. I like how the blade still has 'age'. The patina makes it. IF you had rebuilt this as more of a chopper than a slicer, would you have reinforced the tang with a metal rod instead of a dowel?
I don't know what it is about the sped up sound but I find it incredibly relaxing. You should start an ASMR channel!
I liked the method you used for mounting the handle to the tang. pretty inventive
Perfect!!!!😍
12:24 the most complicated way to get a slot into a piece of metal. The final handle looks awesome
I like the way you used the dowel to secure the hidden tang. Very nice work.
I think a lot of your stuff is great...but this....this one was spectacular.
I'd like to know where you find these knives. They're so awesome before and even better after.
VERY nice work as always, nice to learn new things :) your technique is inspiring. including the advance frame segments, it really helps to understand your excellent approach as to what need be done properly. thanks!
I just realized these videos are the physical embodiment of another mans trash is another mans treasure
I love the sponsor add you did. The metal looked quite soft on sander at the handle end. From ugly to nice
Awesome work brother.
The sound at 3:20 sped up is really funny to me for some reason XD. On a side note, i love these sorts of videos, not only are they really interesting, but it's also beautiful in a way to watching something someone essentially threw out go back to it's former glory.
I dig that when you fire up your belt grinder on the 2x speed, it sounds like a taglharpa