RockShox Lyrik Service | Cycling Lounge

Поделиться
HTML-код
  • Опубликовано: 26 май 2019
  • A quick RockShox Lyrik Service by our Mechanic Luca.
    FOLLOW US:
    Website: www.cycling-lounge.ch/
    Instagram: / cyclinglounge
    Facebook: / cycling-lounge-3365402...
    Produced by
    Karim Rifai
    www.gotemproductions.com/
  • СпортСпорт

Комментарии • 19

  • @waldchiller4695
    @waldchiller4695 5 лет назад +45

    Sag ring on the wrong side :) happens..

  • @FelipeAF_YT
    @FelipeAF_YT 5 лет назад +14

    01:27 try not to do that next time, the seal can pop-up during a fast compression, the seal is installed in dry and grease are only on the inner side, touching the stanchion.

    • @The_Dude_420
      @The_Dude_420 4 года назад

      You mean a white paste like the fork grease from Dynamic? Cause it looks like he just used fork oil.

  • @Hawlkeye-e9p
    @Hawlkeye-e9p 3 года назад +2

    Pulled 2017 lyrik 160 off pinkbike for 250. New seals and oil. Rollin without a colon.

  • @johnystrange665
    @johnystrange665 4 года назад +10

    Torque wrench needs to be used, expensive mistake if you strip or damage threads.

  • @singletrack4614
    @singletrack4614 4 года назад

    Awesome

  • @jackbeames7643
    @jackbeames7643 5 лет назад +1

    Can you do fox forks for a vid?

  • @sebastiandelarzevidal7423
    @sebastiandelarzevidal7423 4 года назад

    great video! what oil do you use?

    • @cesarayala8665
      @cesarayala8665 Год назад +1

      Looks like he is using Rock Shox 0w-30, but I have a Lyric 2018 and the manual recommends to use Maxima Plush for this procedure.

  • @andtheflyinglizard
    @andtheflyinglizard 3 года назад

    upper legs too?

  • @chartreuse.o..3
    @chartreuse.o..3 3 года назад

    What is the oil ?

    • @cesarayala8665
      @cesarayala8665 Год назад

      Looks like Rock Shox 0w-30, but I have a Lyric 2018 and the manual recommends to use Maxima Plush for this procedure.

    • @chartreuse.o..3
      @chartreuse.o..3 Год назад

      @@cesarayala8665 yeah thanks you that is why I did eventually 🤙

  • @timmcdermott815
    @timmcdermott815 4 года назад +5

    Change your gloves after reinsertion man, so much oil everwhere!

  • @nikolaanastasov5013
    @nikolaanastasov5013 3 года назад +3

    never compress forks like that :D ......

    • @Lagmaster
      @Lagmaster 3 года назад

      why

    • @TheShivermetimbers10
      @TheShivermetimbers10 3 года назад +4

      @@Lagmaster the rebound cap is on the floor while the fork is being compressed, not great for it.

  • @eden4x4
    @eden4x4 3 года назад +3

    You work too brutal. Don't need to tap the screws so many times. You should unscrew them about 5 turns, then you just tap them until they are attached to the lower legs assembly