Rockshox Lyrik RC2 200H Fork Full Service TUTORIAL step-by-step 🛠️ | Ultimate DIY How To
HTML-код
- Опубликовано: 27 июл 2024
- In this video i will show you how to do the 200H full service for the Rockshox Lyrik RC2 2019 fork. I covered every service included in the manual, using the same products and almost the same tools. This was the first time that i did the full service on a bike fork, but with the right tools and following the procedure in the manual i was able to do it without major impediments. As for my rockshox rear shock, the effort to produce the video and the overall maintenance was quite a lot, but probably the bleeding and overall working on the rear shock was more difficult! I really hope that this tutorial will help you to undertake this kind of service by yourself. Happy maintenance, happy watching, leave a like and please subscribe to the channel FOR FREE!
#lyrik #service #tutorial
SUBSCRIBE HERE 😉: bit.ly/3hwWxrP
Check my amazon shop: www.amazon.de/shop/snowft86
00:00 Quick Intro
00:27 Lower Leg Removal
02:26 Lower Leg Service (200H)
04:33 Air Spring Removal
07:17 Air Spring Installation
09:42 Charger Damper Removal
10:30 Charger Damper Service
12:21 Charger Damper Assembly
13:22 Charger Damper Bleed
14:53 Compression Test
15:14 Charger Damper Installation
15:58 Lower Leg Assembly
Tools🔧
- Bike stand: amzn.to/3INX3wQ
- Vise (a classic one, stable): amzn.to/3vKWPCT
- Hexagonal key 2mm-2.5mm-5mm: amzn.to/3Cm1CvC
- Rubber Hammer: amzn.to/34mAXCC
- Rubber gloves: amzn.to/3INrBib
- Oil pan
- Shock pump: amzn.to/3HMPp4y
- Pick straight + Pick 90°: amzn.to/3vKBYiZ
- Good quality Tire Lever: amzn.to/35yOhEk
- Adjustable wrench (till 23mm): amzn.to/35yOhEk
- Plastic dowel
- Bottom of a plastic bottle
- Rockshox 35mm Dust Seal Installation Tool
- Torque wrench: amzn.to/3Ksrqtb
- Rockshox or Shimano freehub removal tool: amzn.to/3MtVExr
- Retaining ring pliers: amzn.to/3HP5K8N
- 8mm hex wrench: amzn.to/3Cm1CvC
- 12mm-15mm-23mm wrenches: amzn.to/3Cm1CvC
- Torx T10: amzn.to/3Ko2piu
- Compressor (air): amzn.to/3vKAmpI
- RockShox Bleed Syringe: amzn.to/3tziong
Products🚲
- RockShox 200h/Year Service Kit for Lyrik RC2 C1 (Manufacturer Item no.: 00.4318.025.020)
- RockShox Butter Grease: amzn.to/372ofK5
- Rockshox 3wt suspension oil: amzn.to/3sMYs0X
- Rockshox 0w-30 suspension oil: amzn.to/3Cmdbmw
- Towels / Microfiber Towels
- Brake cleaner or isopropyl alcohol: amzn.to/3Cmdbmw
- Loctite (strong): amzn.to/3ChFanw
Registered with Gopro Hero 8 @4K 60FPS, FOV Linear, ISO MAX 1600 + Denoiser in post prod, Hypersmooth/Video Stabilization on ON, tripod.
➡ If you liked the video, please leave a like and subscribe! 👊🏻
➡ If you have any suggestion on how i can improve my riding skills or my channel (there is no chance for my English, sorry!), please leave a comment! 👊🏻
➡ If you know an area that i did not cover in my vlogs, please let me know! 👊🏻
- Rockshox Lyrik RC2 200H Fork Full Service TUTORIAL step-by-step 🛠️
- Ultimate DIY How To 
Спорт
Any tool and product used in the video is listed in the video description, smash the like button👍 and subscribe for free 😍for the new tutorials!
Great tutorial Oreste, I'm sure this video will be used and appreciated by many bikers. Good work. Keep it up and ride on
Thanks a lot Christoph💯
Thanks, you inspired me to have the confidence to do this myself. I do need to put on that background tune you used so I can remain patient when something goes wrong or I need to bleed the damper again.
Glad to hear that 👍🏻😃, yes the tune is not casual but it's not for everyone taste !
When you put the air spring back in you got air trapped in the negative air chamber because the entire assembly wasn’t together when you inserted it. You can tell you have air trapped there because in the video when you pull the air spring to test that the snap ring is in place you can see the air spring suck itself back up when you let go. There is an air exchange dimple on the inside of the stanchion which will help equalize the pressure but if this was my fork I would remove the air spring and then re insert it correctly so there is no suck down. Also you should inflate the air spring to at least 20psi before putting the lowers on, this also helps remove suck down, and lastly you should actuate the fork 10 times every 20 psi you put into the fork. This helps equalize the positive and negative air chambers so that you will have an accurate psi reading when you put your shock pump on it. It also helps prevent suck down. I work on suspension professionally and these little steps make a huge difference for small bump compliance. That first 0-20mm of travel will not be active with a fork that is stuck down, causing it to feel harsh and you loose you small bump compliance. Also when letting air out both with the shock and fork actuate them 10 times for every 10 psi to prevent suck down. This is super important with the shock as suck down on a shock can be dangerous.
Bob thanks a lot for the incredible useful explanation! I will definitely follow these steps in the next services, gold advices...🙌🙏
@@OresteCiotoli Glad to help! Happy riding 🚵
@@bobsaget3841 Hey Bob, very good info. Does "keeping the spring together during install" still come into play with the new 2023 Pike? It has a different spacer from previous air springs that the c-clip rests against is why I ask.
@ThunderStruckMTB yes, it should always be done on rockshox and fox products. The fork will equalize when you cycle it after service, but by keeping everything together you eliminate the potential of getting a small pocket of air trapped.
Hello, please what do u mean by "entire assembly wasnt together" ? im doing it right now... and would love to know the correct way.. thanks much
Good video, thank you! Will definitely be using this
You are welcome man 🤝🏻👍🏻
thanks , this vid will help me a ton on my next Lyrik Full service ...keep up the good work man!
You are welcome man🙏👊🏻, glad it helped 💯
Thank you so much for this!
You are welcome 👌🏻
First thing i recommend to remove the pressure from the positive and negative chamber (remove the air valve after you depresurise the posetive chamber and pus and pull the lower leg till you hear the negative air depresurising)
That's a good advice 🤜🏻
Very good tutorial thank you!!
You are welcome! 👊
Awesome 👏
Thanks 🙏 😃
Very good, Oreste. You are the bicycle surgeon.
🤣🤣😍🤝
thank you very much, you are very precision and more information
sorry for my english
Thanks a lot man 🤝🏻👋🏻😎 (edit: ah ho visto ora che sei italiano, grazie! 😁)
Awesome job this should this
Thanks man 🙏
Nice tutorial.
Thanks Karl!🙏
Amazing tutorial Oreste. I'm struggling to find the right oil for my RockShox SID RL3, so I' searching the net to find the proper one.. Thanks for sharing
Thanks and you are welcome! I think you should find on the Rockshox website, if not I will ask them directly 👌🏻
Great Video … it helped me service my Forks .. new SuB 👍. Keep up the good videos
Thanks a lot Noker 🙏
Goodd tuto 👍👍👍👍
Merci beaucoup 👊❤
Gran bel video...vediamo se riesco a distruggere la mia zeb provando a farmi il service da solo
Very nice and like 7
🤝🏻🤝🏻🤝🏻
Great video! Tank you so much! I have a question. I’ve seen other videos of other people putting Rock Shox 0w-30 on the foam rings and bottles. I have a Lyric 2018 and for my fork the manual says to use Maxima Plush oil en the foam rings and bottles, and only use the 0w-30 oil on the damper. So following the manual strictly I purchased both oils. My question is ¿which oil is better for the Rings and the bottles? ¿Why are you using 0w-30 oil instead of maxima plush?
replied to the other comment ;)
Great video! Tank you so much! I have a question. I’ve seen other videos of other people putting Rock Shox 0w-30 on the foam rings and bottles. I have a Lyric 2018 and for my fork the manual says to use Maxima Plush oil en the foam rings and bottles, and only use the 0w-30 oil on the damper. So following the manual strictly I purchased both oils. My question is ¿which oil is better for the Rings and the bottles? ¿Why are you using 0w-30 oil instead of maxima plush?
Greetings from México!
Thanks man 🤝🏻 I just follow strictly what the service manual says, so I will go for the oil that the manual suggests👌🏻
Thanks for a great tutorial. Did you mange to replace your rebound damper knob? As if not, I don't think it would be hard to 3D print a knob that you could glue an hex key into.
Thanks David 🙏 In 1 year no chance to find it, but at the end since I do not change the rebound during the tour, I just use a normal 3mm hex when needed during maintenance!
Im not 100% sure but i think you put the air spring seal head in the wrong way great tutorail tho keep up the good work 🙌
Hello Haru! No it's correct, the air seal head of the kit was different from the original one and in the video i used the correct orientation as shown in the manual 👍 Thanks i will do 😎✌
It's right
Shouldn't there be 3cc of oil in the top air chamber? If I remeber correctly it depends on the seal grease you use, but I am not completely sure. And you forgot the new sag ring. Happened to me, too! 🙂
Yes depends on the grease you use! In this moment I'm not even sure, i should check the manual! Yes after i recorded the video...i did a second lower leg removal 😂😂😂
I see you have to pull out the damper shift after you checked the bleed. Is it normal? Or there's a repeat bleed?
Yes this is the procedure, checking that is working as described. If not, then repeat the bleed 👌🏻
Thx for the cool vid.. your vid is like the manual but actual. got mine serviced after 4 years yesterday
@@sydmichael13 great! Yes i use the manual as a guide, also to do the video properly 👌🏻
13:45 Bleeding the damper was wrong. You should pull on the syringe to create vacuum and draw air bubbles out, not to push against the piston all the time.
this is not how the manual describes the procedure, so i'm not sure if pulling the syringe is correct. I had anyway no bubbles left in the system, how you can see at 14:12
@@OresteCiotoli Indeed in the manual the procedure is as you describe it but check out some other videos on bleeding the charger damper. I bet your fork makes squeaking sound while going through mid size compressions. That's the small air bubbles still trapped in the fluid. It's pretty hard to get out most of them - many suspension shops even use vacuum machines to suck the air out. If you ever bled your brakes - it's the same principle - create vacuum with a vertical syringe -> air gets trapped on top of the syringe -> push back the oil -> repeat.
@@rbt1.0 my fork works without problem, but I will try the vacuum the next time for sure 👌🏻
You push and pull the syringe during the bleed. While you are pushing the damper up simulating going deep into its travel you pull up on the syringe at the same as you are pushing the shaft, then while pulling the shaft back down you push the syringe plunger down keeping a constant pressure in the system. The rockshox manual isn’t super clear so it’s hard to understand.
@@rbt1.0 I bleed my brakes this way too and it works perfect! Everyone complains about magura brakes being hard to bleed but this way my brakes are as snappy as I like it. Glad to hear your tip!
еп ну вот как тут покупать бу вилки в России если чел без проставок зажимает дэмфер в тисках... еще и учит как делать...