Wish Trevor wasn't as busy as he is dude is on another level. Much respect to my bro Trevor with everything he has on his plate still finds time to hoon! cheeee heeeeee
Some info for anyone who has a real gy6 china ped... mine is a very rare 125cc Ariic, but model was released i think in 2018 there are older models, anyways mine is a short case 10" wheel (fuel injection) and yes a big bore 150cc kit works perfect so do it as no videos will show its possible but it is. Also i took the stock variator and filed the top of every ramp until thin and steep after smoothing the best i could i coated it with clear lacker faintly do not get it to drip spray, then i removed 3of the 12g rollers or 10g not sure, i play with it sometimes but oh its a beast. I also forgot to mention i added a rear performance clutch yes it looks like the stock but is only about £30 and is black with red springs and because it is 4 stroke i leave the black stock main clutch spring and im going to add a race cam with steeper ovals. Its a lovely beast of a machine and also stock exhaust and remove the air filter face cover it has a dedicated open filter srewed in under the air filter face plate dont remove that though if rains re attach the cover but first trim around the air access port on the filter face plate to enlargen it a lil. Have a good day and i hope my info has inspired people to do it so much fun it rides almost loke a 2 stroke or pit bike also a wheelie machine to say my bike is heavier than a vespa i think.
I use fiberglass Mesh tape to fix the fairings..I get the adhesive type from home depot...Sand and clean the fiberglass area and stick the tape to it.Put some E6000 on top and cover it.Just let it dry 24 hrs and you are good to go
Keep up with them good videos! Im tuning my derbi senda drd racing right now got a 88cc on it but how much does it cost to build a scooter like that? My engine cost 1500 dollars almost if you wanna hear it its on my youtube
@@chuckbarnes5080 try changing it to 6.0:1 or if you can find 6.5:1, those would be better gears to run. Switch whatever lightened BS in the driveline too. Genuine keihin carb is something else I would look into.
@@808StreetKillaz we already have gears gonna swap in 6:8 -6:9 ... 6.9-7:1 is the best any taller than that it's just hurting your low-end and mid range 7:1 gears can do max of 114 mph there my go too I got them in my watercooled 89 lol I know how to tune brotha we just showing the progress plus I only get a couple hours on a Sunday to work on her
@@chuckbarnes5080 🤣🤣 I ain't telling you that you dont know how to tune bro take it easy. I've been fucking with these Dios for long time bro, all I was doing was suggesting things you could do. If you feel that way about ur setup then cool bro
My bike get the same pipe haha decent pipe 😂 if you can't make good power with that I don't know what to tell ya there's only two pipes that are better and not by much and there loud much louder than this pipe, it's great for the money only pipe I would choose other than this is an og scorpion Wich is very similar
rip the dio headset 1/13/21 - 1/16/21
I love my 4 stroke scooters, but something about the sound of a 2 stroke really get me excited everytime
wonky has been added to my vocabulary thank you
Wish Trevor wasn't as busy as he is dude is on another level. Much respect to my bro Trevor with everything he has on his plate still finds time to hoon! cheeee heeeeee
my dude!!!!
You should put links for all the parts you get! It would help out a lot. Love these videos man!
Yes. I have an honda lead 90cc and it looks freaking cool and works too.
Some info for anyone who has a real gy6 china ped... mine is a very rare 125cc Ariic, but model was released i think in 2018 there are older models, anyways mine is a short case 10" wheel (fuel injection) and yes a big bore 150cc kit works perfect so do it as no videos will show its possible but it is. Also i took the stock variator and filed the top of every ramp until thin and steep after smoothing the best i could i coated it with clear lacker faintly do not get it to drip spray, then i removed 3of the 12g rollers or 10g not sure, i play with it sometimes but oh its a beast. I also forgot to mention i added a rear performance clutch yes it looks like the stock but is only about £30 and is black with red springs and because it is 4 stroke i leave the black stock main clutch spring and im going to add a race cam with steeper ovals. Its a lovely beast of a machine and also stock exhaust and remove the air filter face cover it has a dedicated open filter srewed in under the air filter face plate dont remove that though if rains re attach the cover but first trim around the air access port on the filter face plate to enlargen it a lil. Have a good day and i hope my info has inspired people to do it so much fun it rides almost loke a 2 stroke or pit bike also a wheelie machine to say my bike is heavier than a vespa i think.
So sorry about that bro hope your OK keeping safe and well
Hell yea bro love the content.i have a 91 dio 2 and i try hella hard to keep it mint!
Hi love the bikes I have a peugeot speedfight 2 100cc 2 stroke with a 21ml carb and omg I love it 😀
That BM5 looks so cool..seems fun yur boy never shifted before huh...its a diff animal for sure
Good job guys sweet 2 stroke bikes. Way better then when you started those 4T
RIP JDM Dio piece
My JDM #MopBoyz stickers arrived yesterday :-)
Always see that black bike rolling on Hollywood been looking to build up my elite SR 🤙
nice neighbours not complaining
I use fiberglass Mesh tape to fix the fairings..I get the adhesive type from home depot...Sand and clean the fiberglass area and stick the tape to it.Put some E6000 on top and cover it.Just let it dry 24 hrs and you are good to go
eliteeeee
2 stroke powaah baby
You guys make me miss Vietnam
Brake fluid is a headache. I had a leak in my dub, took off the paint I had in the trunk
I got a brand new mint seat if you need one. I got a kymco zx seat for my elite. Much more comfortable
I would definitely get a bigger pipe tbh let’s make some more power and torque and noise 😉
Bike sounds super rich
I'm putting a gy6 150cc on my 1979 Suzuki fz50
Got my 2001 Honda elite Sr
What kit did you use for the 120 from the 50cc
What are your cylinder head Temps like?
Just subbed!! What wheels and disc setup is your boy running on his black elite s?
not sure on wheels but NCY everything up front
thanks for sub!
Keep up with them good videos! Im tuning my derbi senda drd racing right now got a 88cc on it but how much does it cost to build a scooter like that? My engine cost 1500 dollars almost if you wanna hear it its on my youtube
Ayo! I live in vegas as well, what forms do I need if I’m buying a moped without a title. Other then the bill of sale?
What was that geared bike? Sick
I had the same problem on my gilera with the leaking brake fluid reservoir, and it dripped on the front and destroyed the whole front end😭
First u need to do a giveaway bro im trying to win I been watching your vids since u was fixing the stock Tao Tao like 2 or 1 Year ago
i did one a couple weeks ago on the @MOPBOYZ instagram. Make sure to follow to see the next one!
@@MOPBOYZ gotcha
What kind of racing engine should I put on my TaoTao it's the same one your friend got
How's your relationship with your neighbors? My neighbors like my 4 stroke CH 80 Elite scoot.
Did you just use the kit as it comes or did you drop the compression ?
🔥🔥🔥🔥🔥🔥🔥🔥🔥
High humidity?
Is this a Honda Elite SA 50 ?
Just wondering have the mopeds there a speed limit?
Hey dude it sounds like you need to put i bigger fuel jet in your kaburator if you do you will also get a better acceleration
What them big tubs by your waste bin ?
What your 2t oil mix ratio?
Change those gears and keep tuning, that thing should be pulling the 72 like no tmr
That's what he said lol been saying that for a few vids now gears that are in it are pointless just taking away from it's dig
@@chuckbarnes5080 try changing it to 6.0:1 or if you can find 6.5:1, those would be better gears to run. Switch whatever lightened BS in the driveline too. Genuine keihin carb is something else I would look into.
@@808StreetKillaz we already have gears gonna swap in 6:8 -6:9 ... 6.9-7:1 is the best any taller than that it's just hurting your low-end and mid range 7:1 gears can do max of 114 mph there my go too I got them in my watercooled 89 lol I know how to tune brotha we just showing the progress plus I only get a couple hours on a Sunday to work on her
@@chuckbarnes5080 🤣🤣 I ain't telling you that you dont know how to tune bro take it easy. I've been fucking with these Dios for long time bro, all I was doing was suggesting things you could do. If you feel that way about ur setup then cool bro
@@808StreetKillaz same here brotha all good hehe I'm from Hawaii been working on dios since I was 13 2t ftw
Yo boss what gears are you running on the transmission. Thanks. 👍🛵
what years are your Honda elites
How is this vs a polini corsa
Hey! Leaning the bike on its side, is this to get more gear oil in coz it’s tuned and needs more cooling?
no you jus have to lean it on its side to get oil in & out because the bolts are on the sides not on top/bottom.
@@MOPBOYZ cheers 👍
🔥🔥🔥🔥🔥🤘🤘🤘🤙🤙🤙🤙
Gy6 150 swapping my 1989 honda elite. Until I can find a good 2 stroke motor to build.
You have an AF05?
@@gsxrsht5613SB50P
this dont sound right
@@MOPBOYZ the gy6 swap? Or the motor build?
@@mothership1253 don’t put the 4t in the 2t from i’d say keep her 2 stroke. is it the af05 or af16?
Do you buy these mopeds online?
i find them online then buy in person
@@MOPBOYZ no i meant do you import them out of the country
I’m having trouble with my Yamaha jog spark at high rpm it breaks up at a higher rpm
Have u checked the ignition coil could be cooked
100% coil mate I have 3 Yamaha neos’s and a mbk ovetto lol
Could be ht lead or plug to but change coil first could also be restricted cdi too if you’ve recently done any mods
The break fluid smhhhhhh
I'm ordering a scooter on Amazon what do u suggest for 800
A 50 cc
TWO STROKE T
needs a decent pipe on it to get the most out of it!
My bike get the same pipe haha decent pipe 😂 if you can't make good power with that I don't know what to tell ya there's only two pipes that are better and not by much and there loud much louder than this pipe, it's great for the money only pipe I would choose other than this is an og scorpion Wich is very similar
Engine swap the VW bug with a snowmobile 3 cylinder!
Put a camera in there lol
Plug lol
poor neighbors.
take that shit to a track. it sounds too loud for urban areas
Life makes noise, get over it
Loud pipes save lives!!