HONDA Elite / DIO CVT UPGRADES! AF16

Поделиться
HTML-код
  • Опубликовано: 25 ноя 2024

Комментарии • 72

  • @MOPBOYZ
    @MOPBOYZ  2 года назад +3

    Install Raid for Free ✅ Mobile and PC: clik.cc/Ll5I0 and get a special starter pack 💥 Available only for the next 30 days 💥

  • @BananaBabys
    @BananaBabys 2 года назад +10

    Bro when I was 18 I had this almost the exact setup. 12 years ago. Arrow pipe, polini corsa, ported. Wheelies on every road in Honolulu on my way to work or everywhere. If you saw me, I was wheeling. Got it stolen in 5 minutes at the beach. Makes me nostalgic watching your builds.

  • @toddeitz2168
    @toddeitz2168 2 года назад +4

    Nice job hands down one of the best. Descriptions of how a CVT works. The bicycle comparison was brilliant. In helping to describe gear ratios!! Great video bro.

  • @Ev_Chad
    @Ev_Chad 2 года назад +2

    Try and find a zx boss so you don’t need to run so much shims to compensate. Also if you can find a sef or daytona2 ramp that would be a major game changer. Keep up the awesome content 🤙

  • @HayPOWER-PR
    @HayPOWER-PR 9 месяцев назад +1

    How much is the total weight for the 6 roller ?

  • @BloodBath707
    @BloodBath707 2 года назад +1

    having a raid shadow legends sponsor means you've made it as a content creator

  • @predator_boiz336
    @predator_boiz336 2 года назад +2

    Those elites are so hard to come by , can’t even find one in my state

  • @Nickpeezy94
    @Nickpeezy94 2 года назад +3

    Great content as always selling off a few dusty projects my fleet needs a purple elite ✌🏽😄✌🏽

  • @ls_hoopdee
    @ls_hoopdee Год назад +1

    What gears are in this elite?

  • @Gogetter0118
    @Gogetter0118 2 года назад +1

    So you eneded up using the L shape vs the straight shape on pulley? Ive been testing mine too. But I found using S boss with 3.14 worth of shims fit well on 669-18-30 bando or zx boss with .5 shims for 654-18-40 bando. Haven’t tried the Malossi belt
    I appreciate you putting the video together I know it takes some time and effort!
    Tell Chuck I say whats up bro!

  • @КириллЗубков-ж3ю
    @КириллЗубков-ж3ю 2 года назад

    Do you want to try more? The af-18e engine fits a Peugeot Speedfight (racing) cylinder. And a Yasuni c16 tailpipe with a Yamaha BWS

  • @La9Fn
    @La9Fn 2 года назад +1

    Brooo you should put stage 6 potence and a drag bar with bar end and adlin

  • @andyanders58
    @andyanders58 2 года назад +1

    Good job. I can here the harmonics yeee hawww. Old man mop

  • @mopedmessiah
    @mopedmessiah 2 года назад +1

    My boy got that Raid sponsorship 🥺👏👏

  • @KyillFyatPeePole
    @KyillFyatPeePole Год назад +1

    SO GLAD TO SEE THE HYPE ON THE VIDEO #SCOOTERUSA

  • @fluXxSieRra
    @fluXxSieRra Год назад

    U need a little more belt deflection. The belt should be about a 16th of an in above your secondary

  • @shadowsfad3d
    @shadowsfad3d 2 года назад +1

    That elite is dope af 👌

  • @sniffperkz5962
    @sniffperkz5962 2 года назад +1

    Hey bro how much can I expect to pay for a Yamaha jog, Honda dio or Honda elite ? And where would he be able to get one ?

  • @phat56pat
    @phat56pat 2 года назад

    Yeah buddy stoked to see brand deals

  • @miguelpagansr6128
    @miguelpagansr6128 2 года назад +1

    Another great video for the books, I love those old Honda scooters but people want way too much for them.

    • @hongstongs5100
      @hongstongs5100 2 года назад

      What would you pay for this one, as reference?

    • @xaviersland996
      @xaviersland996 2 года назад

      @@hongstongs5100 around 3k depending on condition aside that the Purple ones are rare and worth some extra Cheese

  • @Mayolitooo
    @Mayolitooo 2 года назад

    What helmet are you rocking I love the double visor setup!

  • @Cabral7o2
    @Cabral7o2 2 года назад +1

    Killer elite 👍🏼

  • @adamlambert3892
    @adamlambert3892 2 года назад

    Do a fuel injection build soon please!!!!!!

  • @JackDeltaP
    @JackDeltaP 2 года назад

    Bro you should get a PGO bigmax or PGO hot 50 it’s 2 stroke, very light so easy wheelie and easy to swap I promise you’l not regret It

  • @snoopysrc
    @snoopysrc 2 года назад +1

    Awesome video

  • @michaelmarrero1228
    @michaelmarrero1228 2 года назад

    Bro you should buy a Yamaha zuma 125 4 Stroke love your videos from puerto rico

  • @DOTTMALE
    @DOTTMALE 2 года назад +1

    Bellissimo vai con il gass

  • @shadowkidgaming8253
    @shadowkidgaming8253 Год назад

    So can you somehow make the speedometer work with the disc front end cuz I know it ran off the old hub

  • @nathanviljoen3235
    @nathanviljoen3235 2 года назад

    Yho man can you do a vid on how to make a bug run on only a cdi and coil in the loom?

  • @brotomwang8218
    @brotomwang8218 2 года назад

    I ran the boss that came with my polini variator with no shims. fitment was better with a shim or two in but I wanted my starter to work well so I took the shim out. didnt really notice a low end difference

  • @sethdemello
    @sethdemello 2 года назад

    Dude where do you get all the clear light from I have the clear tail

  • @blue69422
    @blue69422 2 года назад

    Can you explain the patterns in the clutch poulies?

  • @billyirvine7855
    @billyirvine7855 2 года назад

    Yo bro
    I got a kymco 50 agility
    Got a problem were some times when I stop it has no power and starts shaking then all a sudden has power again and works fine any suggestions
    Love the vids 👍👍

  • @GorrillaFastTv
    @GorrillaFastTv 2 года назад +1

    Yessirskii we both dropping bangersss ✅ definitely tryna get a collab going?! As you already know loving the content

  • @creightonsuzuki5608
    @creightonsuzuki5608 2 года назад

    Hi i was wondering where do you order your parts from?

  • @nastynatesscooters9896
    @nastynatesscooters9896 2 года назад

    Do you have the boss the pollini variator came with I think it’s made for the zx

  • @mediatopsecret
    @mediatopsecret 2 года назад

    Hi bro nice one, how do you make your belt topping to the end of the variator? I have a problem it does not go to the top and because of that i dont have the top speed potential that this variator has, did you have this problem? I have polini hi speed variator kit, thanks in advance ✌️

  • @zalmanfans1334
    @zalmanfans1334 2 года назад

    Do you know why my speedometer is stuck at 5 miles per hour when I'm at a dead stop ?

  • @ogKEGGY
    @ogKEGGY 2 года назад

    I used a 50cc GY6 boss.

  • @S0NATA471
    @S0NATA471 2 года назад

    Hey a quick question. How do you make those black textured plastic shiny?

    • @MOPBOYZ
      @MOPBOYZ  2 года назад

      back to black

  • @gulfcitynd
    @gulfcitynd 2 года назад

    Always put on heavier variator weights

  • @losarogers7478
    @losarogers7478 2 года назад

    How much those rims

  • @adammcdonald6201
    @adammcdonald6201 2 года назад

    Whats the atvantage of no have a speedometer?

    • @MOPBOYZ
      @MOPBOYZ  2 года назад

      there’s no advantage

  • @rail176
    @rail176 2 года назад

    Where can I get these rims . Do they fit a zuma

    • @MOPBOYZ
      @MOPBOYZ  2 года назад

      gotta find someone selling a set, no won’t fit zuma

  • @duggyfresh26
    @duggyfresh26 2 года назад

    Hi MOPBOYZ. I recently bought a 2020 jiajue 49cc challenger scooter. Was wondering if you could give me some tips on what I can do to make it like the scoots you have. Also really love your content! Keep up what your doing

    • @mopedmessiah
      @mopedmessiah 2 года назад

      Make it like his in what way? Cosmetics are whatever your mind can think of. Performance wise assuming your bike is a 49cc 4 stroke you can dump probably 6-800 dollars into a really good 80cc/88cc kit and tune it good but you'll never really touch the performance of these Elites/Zumas. Do probably 50-55mph and theyre fun for what they are but wont hold a candle to a 2 stroke

    • @duggyfresh26
      @duggyfresh26 2 года назад

      @@mopedmessiah I should’ve been more specific. I meant performance wise. I’m just trying to see what rigs I could possibly use to make it like these one (well close to these ones). And yea it’s a 4 stroke. Guess I’m really asking on what kit I should go for if there’s one in particular

    • @RandomClipsForFutureMe
      @RandomClipsForFutureMe 2 года назад +1

      You can't do anything to make it perform like a modified 2 stroke. Sell the 4 stroke and get the right base. The closest u can get is a 150cc 4 stroke, but a modified 2T will still smoke it.

    • @mopedmessiah
      @mopedmessiah 2 года назад

      @@RandomClipsForFutureMe ill back up 150s all day. Theyre chinese mostly yea but my taotao 150 with 155 cylinder, cam and stock cvt with a pipe and carb jetting was a good lil bit faster than my old 75cc Elite with everything but a crank. 150s are super easy to work on, the torque is stupid fun and a well tuned one can do 60-65mph and cruise at 45-50. Obviously a Corsa Elite would probably whoop a modded 150 but theyre easy to get into. Whole 171 kit costs maybe 600 bucks with cvt and all and you dont even really need that

    • @mopedmessiah
      @mopedmessiah 2 года назад

      @@duggyfresh26 if you want a kit recommendation tho if you really wanna stick with the 49cc and build it, SSPG, Naraku, NCY are probably the 3 best names to stick with

  • @DelgadoWps
    @DelgadoWps 2 года назад

    Where is RJ ?

  • @milsachocomelk
    @milsachocomelk 2 года назад

    Pogchamp

  • @SchleighSimeon
    @SchleighSimeon 2 года назад +1

    where do you put the shims for the clutch?

    • @MOPBOYZ
      @MOPBOYZ  2 года назад

      between variator boss & driveface

  • @krikekingwar3052
    @krikekingwar3052 2 года назад +2

    HI I LOVE YOU

  • @eliasrasanen2601
    @eliasrasanen2601 2 года назад

    Buy Yamaha aerox

    • @MOPBOYZ
      @MOPBOYZ  2 года назад

      buy me one

    • @thijs5469
      @thijs5469 2 года назад

      @@MOPBOYZ I have one😂 but I live in Holland here you can pick one up for 300 usd

  • @Cil3kes
    @Cil3kes 7 месяцев назад

    Dj Kymco looks better

  • @guembo
    @guembo Год назад

    can you please tell me if the zx pully would fit on a minarelli engine