ruclips.net/video/GzCHzuXB7Hw/видео.html 8:00 minutes in to this video, I show you how. From the main screen on your Tango, hit the menu button, and page over to the telemetry screen, scroll down, and discover new sensors. In Betaflight Configurator, make sure under the config tab, that you have telemetry checked.
Thanks for this tutorial! One question though: are you 100% sure you should set DELAY in the logical switch in order to prevent early callouts (e.g. during punch-outs) rather than DURATION? To me (and I have just learnt everything from you video) DURATION means that the logical switch needs to be triggered for the given amount of time, so the condition a
Thanks for your time.in my case, RxBT sensor value is fixed at 4.7V, it doesn't change with change in battery voltage. telemetry is ON in XF nano rx, voltage sensor in ON as well. is it because as it is soldered to 5v pad on FC? i want avg volt per cell value to be showing up instead. do you know why? and how can i fix it? thanks
@@TitanFPVtried already but it didn't work. its not the battery voltage, I have tried 3s and 4s, but the value of RxBT is constant at 4.7V or 4.8V, so i am assuming its the voltage of the pad it is showing on which it is soldered i.e. 5v pad. any suggestions?
Love having viewers from all over! Thank you. I only fly my Nemesis Micro with that setup. I don’t currently have a video with it in real time, but I could take a look at making one.
hi, how can I locate a lost drone with tango 2 with the signal strength of RRSI or LQ? In the taranis it is only to press the page button for 3 seconds.
Thank you so much. Subbed
Anytime!
Thank you that was super easy to follow, appreciate your time :)
Glad to help!
Thanks a lot man! this save me some troubles since I just had a OSD chip fried due to a crash, really appreciated.
Anytime! Glad to help.
At 10:08 and 12:23 minutes, in my tango only "Batt" appears, is it the same as RXbt?
I believe that’s the transmitter’s battery voltage. You need to select RxBt from the telemetry options. Are you running Crossfire also?
@@TitanFPVHello, I use the tango 2 updated to the latest version. But Telemetry (9:25) does not appear, how do I solve it?
ruclips.net/video/GzCHzuXB7Hw/видео.html 8:00 minutes in to this video, I show you how. From the main screen on your Tango, hit the menu button, and page over to the telemetry screen, scroll down, and discover new sensors. In Betaflight Configurator, make sure under the config tab, that you have telemetry checked.
If I cant get battery on osd. I'd set up 50% (3.8v) call out as a heads up to start coming back and then do 3.5v batt low and then 3.4v critical
Great video, I set my critical battery callout to Landing mode!
closest to land now in the list of callouts available
Thanks! I believe I saw that one as well.
thanks man you are very helpful, at last i can fly without frying lipos
Anytime! Glad to help!
This really helped thanks!
Good Information!
Thanks!
I don't have the rxbat+ option on my tango. Do you know maybe why?
Thanks for this tutorial! One question though: are you 100% sure you should set DELAY in the logical switch in order to prevent early callouts (e.g. during punch-outs) rather than DURATION? To me (and I have just learnt everything from you video) DURATION means that the logical switch needs to be triggered for the given amount of time, so the condition a
Yep, it’s set up right. I’ve used it this way multiple times.
@@TitanFPV OK - thanks for confirming - I have given it a good read and it goes in line with what you say 👍
Anytime!
Thanks for your time.in my case, RxBT sensor value is fixed at 4.7V, it doesn't change with change in battery voltage. telemetry is ON in XF nano rx, voltage sensor in ON as well. is it because as it is soldered to 5v pad on FC? i want avg volt per cell value to be showing up instead. do you know why? and how can i fix it? thanks
Skip to 3:57 into the video, and follow my steps to change battery voltage to average cell voltage.
@@TitanFPVtried already but it didn't work. its not the battery voltage, I have tried 3s and 4s, but the value of RxBT is constant at 4.7V or 4.8V, so i am assuming its the voltage of the pad it is showing on which it is soldered i.e. 5v pad. any suggestions?
Excellent! Do you have a video of how it works in real life) (working drone)? Greetings from Colombia
Love having viewers from all over! Thank you. I only fly my Nemesis Micro with that setup. I don’t currently have a video with it in real time, but I could take a look at making one.
hi, how can I locate a lost drone with tango 2 with the signal strength of RRSI or LQ? In the taranis it is only to press the page button for 3 seconds.
I followed, but Rxbat reads 4.9 volt, so it's ready the Rx voltage out of the FC.
What drone is that? I want one!
The 3” version. www.gankmultirotors.com/product-page/nemesis-micro
im new to this fpv. 4s is 14.8v and 6s 22.2v so i will input the average value of the battery and set also the voltage when it drops?@@TitanFPV