2:42 See that little gold poppet valve? The tiny oring on it is beveled, you want the narrower side of the oring to be facing the head of the poppet, this looks like (not a hundred percent sure) the narrow end is facing away from head. I know this because I made the same mistake. Cause putting the bigger end of oring towards head of poppet makes the oring/poppet head rim line up flush with one another which looks correct but is not, the narrower end of oring is suppose to slide into crack between the poppet and the poppet head. Also here's another little tip: use a zip tie to keep the fuel line that plugs into the FPR out of the way while you are working, just zip tie it to one of those large bolts that the plastic engine cover screws onto... then as soon as you're done getting FPR all set up properly you just cut the zip tie, reattach fuel line to FPR and you're golden!
2:42 See that little gold poppet valve? The tiny oring on it is beveled, you want the narrower side of the oring to be facing the head of the poppet, this looks like (not a hundred percent sure) the narrow end is facing away from head.
I know this because I made the same mistake. Cause putting the bigger end of oring towards head of poppet makes the oring/poppet head rim line up flush with one another which looks correct but is not, the narrower end of oring is suppose to slide into crack between the poppet and the poppet head.
Also here's another little tip: use a zip tie to keep the fuel line that plugs into the FPR out of the way while you are working, just zip tie it to one of those large bolts that the plastic engine cover screws onto... then as soon as you're done getting FPR all set up properly you just cut the zip tie, reattach fuel line to FPR and you're golden!
Thank you for sharing
Your missing the aluminum popet carrier that goes into fuel bowl ,it has an oring. The poppet goes inside it,beveled side to poppet face.
Did it fix your problem?
He says it hadn't ran in so many days and it started in the video.
Any leaks was crush washer suppose to go in fpr hole?
Hey what rubber piece goes and what size for the fuel line thanks
Also do you have to a rubber piece or can you just flare it
Is it me or is your diesel fuel blue.