Awesome. How do you get the engine and the tranny to work together? Probably simple but I am not mechanical. a converter, right? If so, did you make it or buy it? thanks Gary
Wie hast du das mit dem Getriebe gemacht??? Hält das Getriebe die Power aus?? Habe einen 6.2er Diesel und einen Ford Dexta mit Motorschaden. Überleg schon lange diesen ein zu bauen hab aber Angst dass das Getriebe hopps geht.
hej, einfach mal eine dumme frage aus Daenemark,wie hast du das mit der vorderachse gemacht? ich habe einen TAE 20 mit einem Scorpio 2,8 i Motor, aber ich musste einen Hilfsrahmen bauen um die Aufnahme zu tragen. hast du eine einfachere loesung? viele gruesse Stefan
Huge vacuum leak center of the carb. That might be the reason its idled so high to try to compensate and keep some what of an idle. Also great job love the ingenuity.
I agree! How could you be sharp enough to build such an outfit and not see that the vacuum hose that is supposed from the carb base to the PCV valve on the right hand valve cover is missing??? That would effectively stop the vacuum leak. I would say too, that it is a really nice conversion and those pipes are great, maybe a little loud for an old guy with hearing loss, but I'd love to have it!!
Love the sound. But completely useless and the original engine gives the best mpg for any tractor. PTO is cheaper than diesel today. Nice build by the way.
I know that comment was 2 years ago, but the torque will be similar to the original engine. Well within the limits of the gears, they will be spinning at twice the RPM but that's fine. There is potential to slip and burn the clutch, but I'm assuming he did some sort of adapter to use the clutch from the gas motor
I hope you can understand my English-I love your mean vintage farm traktor! Nice restoration even the Chevy V8 looks like it was designed to fit that traktor. I wonder how well this would do at the Euro traktor pulls(vintage class)? Keep up the good work!
Nice looking machine and that motor and tractor look like they were made for each other.
Man I LOVE that tractor! We had a 1941 Furgeson Ford 9N and it was part of the family. Thanks for posting this!
Immer noch richtig geil der Traktor
This could actually be the best download I have ever seen.. It's people like this who make life worth living..
echt geil gemacht klasse sound
Very nice and a thumbs up for you.
Volevo più spettacolo....bello nn ce che dire👍
Excellent maintenance tractor.
Alter ist das ding Geil ;) Und der Sound erst!!!
Looks really cool 😎
En riktigt fin Grålle!
Der geilste Trecker im Universum!!!
Świetny film . łapka i subek :)
Wunderbar! (Coming from the USA)
Verrückt, aber sehr geiles teil. Wäre froh wenn ich nur halb soviel schraubern könnte ^^
ingilizler sagolsunlar traktorude nıce yenilikleri bize dunyaya ilk ulastiran milletlerdir
That's pretty awesome
It's awesome! And beautiful! :D
Respekt! Spitzenidee, klasse umgesetzt! Daumen hoch!!! :-)
Geile Maschine, schau mer mal ob ein Diplo 5,4 Motor in meinen Eicher passt. supergeil!!
might want to plug off that big vacume port on the front of the carb, it will run a bit better
Yep that is for power brakes, heck of a vac leak.
@@nox7539 no that's not for the power brakes it is the PCV valve goes and no vacume there
@@nox7539 ujhihhu .
Jjuii-kooollolkll?okio9
@@nox7539 pcv valve
Das lässt das Herz höher schlagen :)
geiler sound ...:-)
Was original engine also part of the tractor's frame like the other powertrain sub-assemblies?
wow a great machine
Absolute spitze...
I have a TEA-20 Ferguson tractor and i want to add a Chevy engine to it. What parts did you use to convert it across?
Respekt. Ich nenne nicht viel Endgeil. Aber das Teil ist echt Hölle.... Top Arbeit👍👍👍
Cooles Teil, besonders auch optisch.
Ficou bonito demais esse trator!!
Schönes Teil, so muss das sein.
Wow what a sound
Awesome. How do you get the engine and the tranny to work together? Probably simple but I am not mechanical. a converter, right? If so, did you make it or buy it? thanks Gary
Wie hast du das mit dem Getriebe gemacht??? Hält das Getriebe die Power aus?? Habe einen 6.2er Diesel und einen Ford Dexta mit Motorschaden. Überleg schon lange diesen ein zu bauen hab aber Angst dass das Getriebe hopps geht.
As a owner of a 1939 TEA 20 thats just not right to me but you have done a nice job
I agree
At least it’s not rotting in a scrap yard...
einfach geil
Perfekt! 😎
It would be the best for city drag race or for lowriding!
fährst du damit nur zum Melken oder auch noch Pflügen etc.?
Pretty cool but like to know more about the adapter plate and things that hooked it up
Gotta luv it !!
Jing's Hall g
eeedeeeeddeeddeeedeè
nawet pies podziękował:)
Any more video on the build? Would like to see how the motor bolts to the gearbox
When the U.K. and the U.S.A. mix their knowledge, it makes dope shit like this.
Espetáculo 👋🏼👏🏼👏🏼👏🏼👏🏼👏🏼
Muito bonito o trator!!!!! parabéns!!!!
one wild ride
Beautiful tractor! or wait a Corvette? 8 )
jaaaaaaaaaaaaaaaaaaaa super so muss sich ein v8 anhören und nicht anders
Did u make a adaptor for the bell housing or can u buy 1
Echt coole Kiste man
awesome!!!
LOOOOL!!! I want one!
Coole Show
Congratulations. Peterborough (Heimat von Perkins) lässt grüssen.
klasse sound, isn just for fun vehikel!!kann ich absolut verstehn xD
Qui luxo tens muito gosto!!
Super!
hygd
A fantastic build! Well done! I'm not sure if it has a three point hitch or wheely bars though!
Love it but I can't see where the fuel tank is relocated?
Over the rear of the engine. at about 2: 30 in the video.
Superbe ! j'aimerais labourer avec un champs, superbe, il est beau, bref ! j'adore
hej, einfach mal eine dumme frage aus Daenemark,wie hast du das mit der vorderachse gemacht? ich habe einen TAE 20 mit einem Scorpio 2,8 i Motor, aber ich musste einen Hilfsrahmen bauen um die Aufnahme zu tragen. hast du eine einfachere loesung?
viele gruesse Stefan
Sweet:)
Nice very nice I know it's a long time ago do you have any video or pictures of the adapter plate assembly from the start please
Big Like!
I am amazed the gear box can take that RPM W/O detonating,
Gear box can, on things like this the clutch is the problem. Slightest touch and they want to climb over the back wheels.
We should all be so lucky.
Jau, DÄS is mol'n Treggä :o)
Where is the PCV valve on top of the valve cover & the rubber hose to connect it to the base of the carburetor ? There's the vaccum leak !!
yes
Pretty damn cool
sehr geiles vid, 41 zu 0 rate. VERDIENT, auch die gute cam-qualität macht ihren job sehr gute aufnahme :D
trator lindo uma religuia
Need more info! Where's the build video
Huge vacuum leak center of the carb. That might be the reason its idled so high to try to compensate and keep some what of an idle. Also great job love the ingenuity.
I agree! How could you be sharp enough to build such an outfit and not see that the vacuum hose that is supposed from the carb base to the PCV valve on the right hand valve cover is missing??? That would effectively stop the vacuum leak. I would say too, that it is a really nice conversion and those pipes are great, maybe a little loud for an old guy with hearing loss, but I'd love to have it!!
@@irvinslagter8298 .
Kann man mit dem auch Pflügen? :D
Klar,der zieht sogar ein 8 Schar Pflug,kann ihn bloß nicht heben.😂
damit ist das Feld auch doppelt so schnell fertig :D
Almost looks stock in there, except it's missing a pcv/breather on the right valve cover.
Top
génial !
The definition of awesome & insanity, all rolled into one!
Love the idea, but with the tow hitch so far above the rear axle its a death trap if you try to pull anything.
Fail ?
To what ?
Maybe they are just missing a part.
SUPER !!! ;o)
OH HELL YES
Love the sound. But completely useless and the original engine gives the best mpg for any tractor. PTO is cheaper than diesel today. Nice build by the way.
Which engine in this Traktor...
Original gear box ? Does it handle power ok very nice but with no suspension you can't go very fast as you take off if you hit a bump lol
Arthur Woollard
ofcoarse its original, a gearbox is like 80% of a tractor weight/construction, everything else bolts onto it.
I know that comment was 2 years ago, but the torque will be similar to the original engine. Well within the limits of the gears, they will be spinning at twice the RPM but that's fine.
There is potential to slip and burn the clutch, but I'm assuming he did some sort of adapter to use the clutch from the gas motor
love it! double SICK,SICK!! would love to know how you mated the trans to the engine and how the flywheel and clutch work from tractor to sbc
Take the original engine out make a mounting plate to fit the engine and the back end and then you t should bolt together
Sweet tractor. The carb needs adjusted for better idle quality.
How to replace a head gasket on a 8 n Ford tractor
Una máquina
Do the hydropicks stipl work?
i have a TE-20 and i want that one....
bet it's the only v8 fergie in the village. nice job
Tengo el mismo tractor en casa!
Ça déménage
Super tracteur , c’est le nouveau modèle ?
4:14 fiesta st150 ??
Che.motore?.....non.mi.sembra.originale
HELL YEAH!
well yeah
I hope you can understand my English-I love your mean vintage farm traktor! Nice restoration even the Chevy V8 looks like it was designed to fit that traktor. I wonder how well this would do at the Euro traktor pulls(vintage class)? Keep up the good work!