Just having coffee before I go out for a rip. I got a ported 670 ho in a Zx chassis mod sled that’s been my baby for 12 years. She holds her own with the new kids on the block. But I’ll tell you I spend a good amount of time pulling on it like you where doing In the beginning of the video hahaha made me laugh
I'm currently using my 1st Cat 91JagDlx440LT geared low. My friend changed my clutching and my jetting. I used to do 55 to 60 easy but now I'm going about 40 mph. Before I head home I add my oil to my fuel tank then mix it with 5 gallons of AVgas, and top my tank off with regular. After my rig warms up I head out and the slight power gain and throttle response is noticeable 😁
I always wanted to do an Indy wedge chassis with the xcr800 engine. If you buy an old Ultra, the XCR800 engine will drop it pretty easy (Ultra engine support straps and mounts) I was told to use the stock ultra top of the airbox and the xcr800 bottom. HTG made pipes that work with the XCR800 and the wedge chassis. I can't think of a better mod sled to build than an old wedge chassis with a 159HP triple/triple. I think you could get the weight down to 470 lbs or better with some lightweight parts.
@@PowerModzOfficial agree! Just rebuilt top end and runs awesome! Do they commonly have a loud clutch at idle? Like a tick in the clutch that goes away when revved?
Just having coffee before I go out for a rip. I got a ported 670 ho in a Zx chassis mod sled that’s been my baby for 12 years. She holds her own with the new kids on the block. But I’ll tell you I spend a good amount of time pulling on it like you where doing In the beginning of the video hahaha made me laugh
POWERMODZ!! Season’s Upon us boys! Here’s to you COAT smelling like GAS!!
You bet!
I appreciate your ZX700! That thing looks like it can float over powder very special way better than a Factory Build sled!
I'm currently using my 1st Cat 91JagDlx440LT geared low. My friend changed my clutching and my jetting. I used to do 55 to 60 easy but now I'm going about 40 mph. Before I head home I add my oil to my fuel tank then mix it with 5 gallons of AVgas, and top my tank off with regular.
After my rig warms up I head out and the slight power gain and throttle response is noticeable 😁
Love these old zx vids! Considering I wanna build out one myself I'm learning a lot.
You should!
I always wanted to do an Indy wedge chassis with the xcr800 engine. If you buy an old Ultra, the XCR800 engine will drop it pretty easy (Ultra engine support straps and mounts) I was told to use the stock ultra top of the airbox and the xcr800 bottom. HTG made pipes that work with the XCR800 and the wedge chassis. I can't think of a better mod sled to build than an old wedge chassis with a 159HP triple/triple. I think you could get the weight down to 470 lbs or better with some lightweight parts.
The ZX build series is my favorite one you did, I would love to have that sled.
What happen to the ol girl when you guys were checking for spark at that time if you even remember lol
keeley. miss that dude
Hello I am fascinated by the roar of the snowmobile! It's a pity that you are far away, I would ride with you!
Maybe one day!
We have only got 8 inches over hear in maine and it sucks I need to get a beater elan so I can mess around in the woods lol
Great vidoe like always
Glad you enjoyed
Here's hoping we get some good snow soon!
We just did a video on our custom groomer, but now we need the powder to be grooming trails 😅
Ill check it out!
I hope everyone who reads this comment has a great day!
That's very nice!
New MoJo ...It ain't snowmobiling unless your coat smell like 4stroke gas..🤟♥️
Great point!
Would love to see a vid on the damage from that rock collision.
A arm.
Man i was close
I built an XC 700 something like, that I'm sure you had something to do with it 👌
Awesome lol
You have any old xlt mod sled videos!? I remember watching the build videos on that thing back in the day👌
Yes I have a bit and I have a hard drive that is messed up and I need to get it fixed - should have footage on it.
I have a question can you bore/hone out a 440 and put 600, cylinders in it?
Hmm not sure
POWERMODZ... The lost files episode 5!!
I love my zx 800
Great sleds
@@PowerModzOfficial agree! Just rebuilt top end and runs awesome! Do they commonly have a loud clutch at idle? Like a tick in the clutch that goes away when revved?
First!
Man Lou you've lost alot of footage lol
Ive got so much!
View#43