I'm happy to know that this video helped you on your installation. I have a video also for maneuvering folding bike with wheel extender. You can watch it when you have time. Ride safe always! ruclips.net/video/adXRZLSbQ6Y/видео.html
Did you have any experience the angle of the extender move even after tightening it? Especially so hitting something on uneven surface. From the design, there is no support on the angle fixed and it is only by tightening. After the angle moved, it will hit the suspension block and if the extender moved another side, the suspension block will hit the floor.
After a long time, it happens sometimes, so I will just tighten it more. That’s why during the installation process never forget to install the conical spring lock washer. This helps to avoid movement or limit the movement.
These comments on the roller blade wheels have been very interesting. Thanks to all commenting here. A very special thanks to you, Albert Domingo (albertmdomingo), for sharing your expert information in this matter.
You’re very much welcome. I have also a video using decathlon rollerblade wheel (Oxelo). But currently, I used only two roller blade wheel because the other two near the seatpost gave me discomfort because I experienced heel strike many times.
Nice tutorial. I have a question though. Does the arm extend on its own when riding? Heard the Litepro extender has that problem. Can you kindly verify if you have faced similar issue while riding your bike. Tks.
Thanks! I didn't experienced that, the arm extending own its own? It's already a year since I installed the extender on my orange trifold bike and I still don't have that experience. Maybe others didn't push in properly. If that thing happens after pushing it correctly, then it's faulty and needs to be replaced. So far our 2 bikes with litepro wheel extender are still ok. The Quality is good! Worth buying!
What brand of trifold bike do ypu have? Brompton or other brands like pikes or 3sixty? For 3sixty, let's say the left wheel. Screw, washer, extender plate, conical spring washer, then the bike mounting point.
I already installed this type on my friend's C-line Brompton and it was okay, You don't even need to put extra washer as spacers, only the conical spring lock washer which is a must. But for P-line I'm not sure. I think should be okay.
Pretty bikes. Nice set up. Such a well done video, so very helpful. I was really stuck. Got the part, no instructions. Thank you so much!
🇨🇦 here.
Yes! Thanks for all the fine details you covered - from start to finish.
I'm happy to know that this video helped you on your installation. I have a video also for maneuvering folding bike with wheel extender. You can watch it when you have time. Ride safe always!
ruclips.net/video/adXRZLSbQ6Y/видео.html
thanks for the detailed instructional video!
There's about 1mm clearance on a 2008 Brompton frame, you can just get one washer in on one side.
Love your video! Extremely helpful!
Thanks a lot! Have a good day and God bless!
Thanks a lot for the great video. It help me to install the extender.
You're welcome! Thanks for watching! Ride safe always!
Excellent tutorial!
Great video!! I just got my litepro extender and your video helped a lot (I have a 3sixty, so the washers are needed).
Thank you for the details steps!
Thank you.
You're welcome! Have a good day!
Did you have any experience the angle of the extender move even after tightening it? Especially so hitting something on uneven surface.
From the design, there is no support on the angle fixed and it is only by tightening. After the angle moved, it will hit the suspension block and if the extender moved another side, the suspension block will hit the floor.
After a long time, it happens sometimes, so I will just tighten it more. That’s why during the installation process never forget to install the conical spring lock washer. This helps to avoid movement or limit the movement.
Try install rollerblading wheel. More stable and smooth to push
Thanks! I will try that one! 👍👍
Rollerblade wheels are thicker than stock wheels, will it interfere with the paddling?
You have a point, it will cause heel strike on the 2 wheels near the suspension block.
These comments on the roller blade wheels have been very interesting. Thanks to all commenting here. A very special thanks to you, Albert Domingo (albertmdomingo), for sharing your expert information in this matter.
You’re very much welcome. I have also a video using decathlon rollerblade wheel (Oxelo). But currently, I used only two roller blade wheel because the other two near the seatpost gave me discomfort because I experienced heel strike many times.
Nice tutorial. I have a question though. Does the arm extend on its own when riding? Heard the Litepro extender has that problem. Can you kindly verify if you have faced similar issue while riding your bike. Tks.
Thanks! I didn't experienced that, the arm extending own its own? It's already a year since I installed the extender on my orange trifold bike and I still don't have that experience. Maybe others didn't push in properly. If that thing happens after pushing it correctly, then it's faulty and needs to be replaced. So far our 2 bikes with litepro wheel extender are still ok. The Quality is good! Worth buying!
@@albertmdomingo Thanks! 🙏
Thank you. 🥰 have a great weekend!
Hello. Great video. Which way round should the conical spring washer be? Thanks
What brand of trifold bike do ypu have? Brompton or other brands like pikes or 3sixty?
For 3sixty, let's say the left wheel. Screw, washer, extender plate, conical spring washer, then the bike mounting point.
Nice info 🔥🔥🔥
Salamat po pare ! Solved 3sixty ko
Welcome Pre! Thanks for watching!
nice thanks
You're welcome! Thanks for watching!
Galing ser!
Would this be suitable for P Line Brompton. I bought one extender but this would not fit on the P Line.Please kindly let me know.
I already installed this type on my friend's C-line Brompton and it was okay, You don't even need to put extra washer as spacers, only the conical spring lock washer which is a must. But for P-line I'm not sure. I think should be okay.
TQ for your info.
You're welcome! Thank you for watching!
pre anong bag brand/model gamit mo sa Brompton? Tnx
LIVI Sir.
Hi… what is the diameter of the M6 washer? Thanks alot!
6mm diameter.
The last time I ordered extender, they already included extra stainless steel washers inside.
Thanks for the reply
Great video! Thanks!
I've a 3sixty and am looking to buy more washers online but there are so many sizes! Can you advise which size to get?
@@albertmdomingo Thanks for the information!