I like it that you come up with different ideas and test out different products on your Brompton. I have been to a couple of Brompton dealers. Whenever I mention one of your hacks or other non-Brompton products to them they say either that they could no longer service a Brompton with a hack on it or they say don't do it, it will ruin the bike.
If a Brompton dealer ever refuses to service my bike because I have a rear view mirror or a piece of inner tube on my seat post, I'll e-mail Brompton right away and complain about it.
I saw this post at a facebook page. I like your channel, wish you came out earlier (2014-2016) when I was using my Brompton on a daily basis until I had money to buy a Jeep. Nowadays, I roll around in my brand new hybrid, brommie’s been snoozing.
Hey I am a subscriber, and I just wanted to say that I know these videos take a great deal of work and it shows. These are the best Brompton tip vids out there-thx
I spent hours researching these wheels from them without coming to a conclusion of which hardness/bearing combination I should try. Then I called them, explained the application I'd have for these wheels, and they were kind enough to send me these samples to try and inform the community. Thanks for watching!
Victor... You are a Brompton Ninja! I love the idea of the rotawheels, but the noise would drive me nuts! Probably a worthy trade-off for the ease of movement so I’ll be off to their website in a moment! There are bazillions of uses for used inner tubes - you have offered some superb suggestions! Keep riding and hacking and Stay Safe - love your well produced and interesting videos 👍🤩
Ahah that's a cool name! The noise put me off for a minute when I first tried them on, but after taking the bike to the grocery store I realized it wasn't bad (the softer ones). And yes, we can get very creative with some old tubes and zip ties!
Just got my brompton recently and have been binge watching all videos. Thank you for the amazing content. Just curious to know more about your shopping bag... was it a DIY?
I'm glad to hear that! That is a shopping bag for the Brompton Electric by Valeria's Bike Accessories, in Barcelona. They have bags for both the e-Brompton and standard one, and they are absolutely beautiful. I'll talk about them in the next couple of weeks.
I just ordered omni wheels a week ago, after a few months of postponing. If only I'd known you were going to make a video about it... :) Let's compare notes :)
Thank you. Have a hey bike Mars but it’s too big for me. Looking at Brompton. Your videos are convincing me it’s well worth the investment. Using it as a shopping cart ! I’m in nyc. That is brilliant! Going to the store in nyc today to see it in person.
Hi Jntmarie, Kindly advise if you find a great store in NYC for the Brompton's. Other than the Hey Bike Mars' size being too big for you, would you recommend it to others? Where did you purchase it? Thanks, Happy Trails,phil
Aloha from Hawaii Victor, Love your channel! That inner tube on the seat post is a great idea! I'll share one inner tube idea also for the chain stay, I cut a small strip of inner tube, then cut again so it folds open. Wrap around the chain stay and use Gorilla Glue/Super Glue to bind the tubes into itself. Careful not to glue the tube to the frame. When it dries, you can stretch and turn the seam inside for a cleaner look.
I never thought of gluing the inner tube like you suggested. When using inner tubes as frame protection, your method probably looks a lot better. Thanks for sharing your idea!
Hi Victor, could you please show me the close up pic of the Omni wheels that you installed on your rear rack. Or a clip of how you installed them. Thank you 🙏
Polycarbonate film works good as a phone screen protector... wonder if it would work protecting the chainstay from the hook... You also might try an actuall hex-nut on that shifter chain... then *put a wrench on it* ... or maybe one of those threaded standoffs you sometimes see in electronics... that would give you a larger surface to grab...
Have the same infini red light from many years ago, it's perfect to use ir attached on helmet when i do road cycling or commute. Thanks for your videos
Re; the tip about storing a multi-tool on the seat post, mine is stored in the side pocket of my Brompton Electric bag. I'm not sure about the omni wheels but I can see the potential for further refinement.
great video with useful hacks. so glad to hear your thoughts on the omni wheels, their hardnesses and how they stack up to the Go Rack! great content as always!
Happy to help! I've done a bunch of research about them in the past, and thought it would be a good think to document my impressions and inform the community!
I do a thousand things with the air chambers. I find the it most versatile of the bike parts. I liked the training wheels! but here in BR only in the supermarket it is possible to use. The floors are bad.
I ordered some of these from Rotacaster as a kit designed for Brompton, but I think I have given up on installing them... There is empty space within the wheel between the two bearings, so when you torque down the bolt it puts force on the bearings' inner race and locks the wheels up. Do people just neglect to tighten the bolt? I hear a lot of people losing omniwheels from them falling off during rides, so I am wondering if that's the case. I tried putting washers and such inbetween the bearings to support them, but didn't have much luck. The only solution that seems to work is to have a second nut to tighten onto the first nut, similar to hubs or threaded headsets. This should work fine but honestly I'm tired of fiddling with it at this point; just going to stick to the easy wheels for now.
Just an update: Found a good solution for the Omni Wheels. I ordered some unthreaded aluminum sleeves to put between the bearings of each wheel and support them. Just pop one of the bearings out and place it between. Specifically the sleeve needs to be: M6 size, 18mm length, 13mm or less outer diameter. Now that I added that, I can torque the nut down plenty tight without locking up the Omni Wheels. Hope this helps someone!
I ordered the omniwheels and I'm kinda 'studying' your video how to exactly put them on my Brompton. Hopefully, they'll turn out just fine. Fingers crossed. Btw: I really love your videos, learned so much about my Brompton and specially about the hacks. Thank you so much Victor!! Wishing you good luck and GBU always, amen!
Hi Victor! Really impressed with the Omni wheels until I heard the noise, thanks for pointing it out and giving an honest review on this. I wanted to ask you also about your side mirror, can you tell which mode it is, as I see it doesn’t affect the folding of the bike. I use ergon gp1 grips so should work just fine with these. Thanks in advance!
Hi, nice video! Do you think it's possible to replace the single wheel of the rear mudguard with an Omniwheel? If it's possible, could you also tell me what parts are needed for the modification? Thanks a lot
I've just fitted the 50 mm OmniWheels. They work fine except I am finding the reduced clearance a bit of a problem at times compared to the Brompton 60 mm Eazy Wheels they replaced. The next size up in the OmniWheel range is 80 mm which might be too tall. Anyone tried that?
Hey man, thank you for your videos! I tried to find the GoRack you mentioned in 5:13 but I could not find it in your videos. Do you mind sharing the link with me ?
Hello from Scotland. I’ve just fulfilled a long held ambition and have bought a second hand Brompton ML6. I am very pleased with it but have a question that you may be able to help with. It has no rear rack and, when folded the front wheel is touching the ground so making it very difficult to wheel around on the rollers. Have you come across this problem before?
Self amalgamating tape might be a better option than electrical tape and ties. Not as cheap but is waterproof and bonds to itself and probably won't ever need to reapply it
That is a shopping bag for the Brompton Electric by Valeria's Bike Accessories, in Barcelona. They have bags for both the e-Brompton and standard one, and they are absolutely beautiful. I'll talk about them in the next couple of weeks.
@@EverydayCycling Thanks so much for your reply and all your videos. I only got my e-Brompton a week ago. I look forward to more info regarding this great bag.
I got my foldie after your awesome videos and followed all your hacks. The latest one on Omni wheel is superb. Gonna get one. The one you had is it - 50mm Rotacaster 2-PACK with 6mm bushing - 60A?
Thanks for this video, you have just sold me the s-bag :) It seems that you have a lot of different bags. What are those, and how often do you used them, and for what purpose do you find them fit?
Hey Everyday Cycling I am excited, just got my Brompton today! Now I too want to install the Rotacoster Omniwheels on my cycle but I am not sure what size to get. I seem to have missed the size and the link you shared is not working for me somehow. Can you help me out with the size of the wheels.
? Omni-wheels on carpet, how wwell do they perform. That and rough sidewalks are my rolling problem . I have been using a roller cart if I anticipate that, and am looking at the Sidewinder,/GoRack but with shipping that approaches $300.
Dear Victor, I thank you for your Channel. Two thumbs wayyyy up. I want to get the Omni Wheels, for my Brompton, Tempest Blue just like in your clip. What a the specific specifications for this? Thank you so much.
@@am235004 Hi, sorry for the delay. My extender doesn’t work any longer, so I had to remove it. I did install the omni wheels on the original frame, though, just for this test :-) My conclusion is yes, they work, but I don’t think they’re worth the headache. The benefit of moving sideways is not a huge addition to the experience and getting the omni wheels is a headache, plus they are not aesthetically great and are a bit clunky. On the other hand, the easy wheels are quiet and smooth and glide easily; so, overall, I’d go with the easy wheels. It might play out otherwise with the extender, but I don’t expect a large difference. When installed on the rack, however, the omni wheels may add value, since the weight is distributed in combination with easy wheels on the “back”. Hope this helps :)
Hello. Before all, thanks for your videos. They helped me a lot while choosing my Brompton and accessories. I was about to order these rotacaster wheels but just noticed they're the same size as the 4 original wheels of the Brompton back rack. And recently I noticed that my front wheel (bike folded) sometimes rubs the floor and the rolling isn't as smooth. I'd be glad to know if you have the same problem after installing the 5cm rotacaster wheels ? Kind regards from France 🇫🇷🙂
It's this one, for the Brompton Electric: www.valeriasbikeaccessories.com/en/brompton-electric/648-pack-shopping-bag-for-e-brompton-ukbraceadapters.html
Hi! I am super interested in the Omni wheels, just wondering, have you run into any quality issues with them? I am in a brompton chat group, some people say they are very easy to break.. what has been your experience? Thanks!
Hi Victor! I have added various upgrades to my M6L since I bought it in January this year. Among these, I earlier added a rack and your idea of the omni-castors. However, since adding a wheel extender and wheels, I have noticed that one of the omni-castors no longer touches any surface when rolling. It is not consistently so when rolling with the handlebars but it is when I am rolling the bike with the seat raised. Can you, or anyone else, recommend what I should do to remedy this?
That is a shopping bag for the Brompton Electric by Valeria's Bike Accessories, in Barcelona. It uses the same frame as the city bag, but with a lot more space for carrying stuff, which is super nice. I'll talk about it in a couple of weeks.
I don't even own a Brompton and I find the videos fascinating.
Those omni-wheels seem an awesome idea!
I think so too!
Lots of great practical tips here, love the Omni wheel already and will be sure to get mine when I get my G line.
Thanks! Most of those tips are handy for any bike, not just a Brompton.
True that!
I am in the market for a Brompton and really appreciate the detail of your videos.
I just got my brompton because of you, and I'm slowly gearing it all up
I like it that you come up with different ideas and test out different products on your Brompton. I have been to a couple of Brompton dealers. Whenever I mention one of your hacks or other non-Brompton products to them they say either that they could no longer service a Brompton with a hack on it or they say don't do it, it will ruin the bike.
If a Brompton dealer ever refuses to service my bike because I have a rear view mirror or a piece of inner tube on my seat post, I'll e-mail Brompton right away and complain about it.
The omni wheels seem great! Not a brompton owner yet but I find your channel very informative.
Me too !
I love the brompton, i wish i can buy one later
Omniwheels are genius
Nice inner tube hack!!! Gotta remember that one..Thanks Victor..
One can get very creative with some old inner tubes!
I saw this post at a facebook page. I like your channel, wish you came out earlier (2014-2016) when I was using my Brompton on a daily basis until I had money to buy a Jeep. Nowadays, I roll around in my brand new hybrid, brommie’s been snoozing.
Hey I am a subscriber, and I just wanted to say that I know these videos take a great deal of work and it shows. These are the best Brompton tip vids out there-thx
I wish I learned about all these tips 10 years ago. Thank you for all of these tips
Lol. Right. Same thing here.
Like the omni-wheels, almost want to get back to commuting to try some of your previous recommendations out
Thanks for the tips. One day I will have enough saved for a Brompton.
I was doing the same research for Omni wheel from Rotacoster these days hahaha. Thanks for sharing!
I spent hours researching these wheels from them without coming to a conclusion of which hardness/bearing combination I should try. Then I called them, explained the application I'd have for these wheels, and they were kind enough to send me these samples to try and inform the community. Thanks for watching!
Victor... You are a Brompton Ninja! I love the idea of the rotawheels, but the noise would drive me nuts! Probably a worthy trade-off for the ease of movement so I’ll be off to their website in a moment! There are bazillions of uses for used inner tubes - you have offered some superb suggestions! Keep riding and hacking and Stay Safe - love your well produced and interesting videos 👍🤩
Ahah that's a cool name! The noise put me off for a minute when I first tried them on, but after taking the bike to the grocery store I realized it wasn't bad (the softer ones). And yes, we can get very creative with some old tubes and zip ties!
Although he’s now lost the stealth element when in rolling mode 😂
Just got my brompton recently and have been binge watching all videos. Thank you for the amazing content. Just curious to know more about your shopping bag... was it a DIY?
I'm glad to hear that! That is a shopping bag for the Brompton Electric by Valeria's Bike Accessories, in Barcelona. They have bags for both the e-Brompton and standard one, and they are absolutely beautiful. I'll talk about them in the next couple of weeks.
Yes, congrats on the new bike!
Bromptons are sooooooo awesome!! Enjoy!!
I just ordered omni wheels a week ago, after a few months of postponing. If only I'd known you were going to make a video about it... :) Let's compare notes :)
For the clamp I use a carbon clip over the frame.
I have non rotacast models and they are silent as heck.
Lets see how they hold up.
Your video is so delicate , neat and well done... Such a pleasure to watch.
Thank you!!
Thank you for your kindness! It's really inspiring to receive comments like yours. Keeps me going. Have a great Sunday!
I love the omni wheels idea
Thank you. Have a hey bike Mars but it’s too big for me. Looking at Brompton. Your videos are convincing me it’s well worth the investment. Using it as a shopping cart ! I’m in nyc. That is brilliant! Going to the store in nyc today to see it in person.
Tell them about my channel! Haha
Hi Jntmarie, Kindly advise if you find a great store in NYC for the Brompton's. Other than the Hey Bike Mars' size being too big for you, would you recommend it to others? Where did you purchase it? Thanks, Happy Trails,phil
Great job just what I need to make bike better thank you
Your Brompton videos are great, thanks for the tips.
Aloha from Hawaii Victor, Love your channel! That inner tube on the seat post is a great idea! I'll share one inner tube idea also for the chain stay, I cut a small strip of inner tube, then cut again so it folds open. Wrap around the chain stay and use Gorilla Glue/Super Glue to bind the tubes into itself. Careful not to glue the tube to the frame. When it dries, you can stretch and turn the seam inside for a cleaner look.
I never thought of gluing the inner tube like you suggested. When using inner tubes as frame protection, your method probably looks a lot better. Thanks for sharing your idea!
I was looking into this and they’ve upgraded the wheel to be more quiet!
Second hack my favorite
I'm glad you liked it!
Hi Victor, could you please show me the close up pic of the Omni wheels that you installed on your rear rack. Or a clip of how you installed them. Thank you 🙏
Hi! I dont have a brompton rack. I was wondering Does the omniwheel fit on part of the original brompton rollers if i dont have a rack?
😅😅
Thank you for the refreshing inspiration and great information - sending good vibrations to the world in challenging times - greetings from Shanghai !
Thanks! Again! On the lookout for more on the bags from Barcelona. xo
Awesome. Thank you for sharing.
Thanks a lot..very helpful channel
Nice work with the Omni Wheels! Im doing a mod for my B using Roller Ball Transfer Bearing Caster. I hope it works. Cheers.
Great video. Put together so professional like. Loved all the info. Thanks for sharing Victor!
Glad you liked it!
Hi, thx for the ideas. I like the tool racks that you pushed out of your space. Can you share a video about them? Thx. Boris
Polycarbonate film works good as a phone screen protector... wonder if it would work protecting the chainstay from the hook... You also might try an actuall hex-nut on that shifter chain... then *put a wrench on it* ... or maybe one of those threaded standoffs you sometimes see in electronics... that would give you a larger surface to grab...
Have the same infini red light from many years ago, it's perfect to use ir attached on helmet when i do road cycling or commute. Thanks for your videos
I used it as a helmet light for a loooong time, until the battery started lasting 20-30min. It was really great as a helmet light.
Re; the tip about storing a multi-tool on the seat post, mine is stored in the side pocket of my Brompton Electric bag.
I'm not sure about the omni wheels but I can see the potential for further refinement.
I agree. For starters, it could come in black!
Superb video
Thank you so much 😀
Tell me more about that front shopping bag for the ebrompton- I want!
Well done. I always enjoy your videos
Thank you very much!
great video with useful hacks. so glad to hear your thoughts on the omni wheels, their hardnesses and how they stack up to the Go Rack! great content as always!
Happy to help! I've done a bunch of research about them in the past, and thought it would be a good think to document my impressions and inform the community!
Thanks for sharing
great video!
I do a thousand things with the air chambers. I find the it most versatile of the bike parts. I liked the training wheels! but here in BR only in the supermarket it is possible to use. The floors are bad.
Fair enough!
I ordered some of these from Rotacaster as a kit designed for Brompton, but I think I have given up on installing them... There is empty space within the wheel between the two bearings, so when you torque down the bolt it puts force on the bearings' inner race and locks the wheels up. Do people just neglect to tighten the bolt? I hear a lot of people losing omniwheels from them falling off during rides, so I am wondering if that's the case.
I tried putting washers and such inbetween the bearings to support them, but didn't have much luck. The only solution that seems to work is to have a second nut to tighten onto the first nut, similar to hubs or threaded headsets. This should work fine but honestly I'm tired of fiddling with it at this point; just going to stick to the easy wheels for now.
Just an update: Found a good solution for the Omni Wheels. I ordered some unthreaded aluminum sleeves to put between the bearings of each wheel and support them. Just pop one of the bearings out and place it between. Specifically the sleeve needs to be: M6 size, 18mm length, 13mm or less outer diameter.
Now that I added that, I can torque the nut down plenty tight without locking up the Omni Wheels. Hope this helps someone!
Hi Victor
Love the Hacks!
Specially the sand paper. It is verry useful!
Congrats!
👍🏻😊👏🏻
Thanks Chris!
Love it!!!!!! keep em coming and Keep Safe!!
Thanks! Will do!
Awesome. Thank you
I ordered the omniwheels and I'm kinda 'studying' your video how to exactly put them on my Brompton. Hopefully, they'll turn out just fine. Fingers crossed.
Btw: I really love your videos, learned so much about my Brompton and specially about the hacks.
Thank you so much Victor!! Wishing you good luck and GBU always, amen!
Nice one how a video for rolling on rougher surfaces ?
Hi Victor! Really impressed with the Omni wheels until I heard the noise, thanks for pointing it out and giving an honest review on this. I wanted to ask you also about your side mirror, can you tell which mode it is, as I see it doesn’t affect the folding of the bike. I use ergon gp1 grips so should work just fine with these. Thanks in advance!
Love this videos. Greetings from Argentina
Glad you like them!
Hi, nice video! Do you think it's possible to replace the single wheel of the rear mudguard with an Omniwheel? If it's possible, could you also tell me what parts are needed for the modification? Thanks a lot
Excited to hear about the GoRack update. I hear they're going to add rack function back in.
They will indeed!
I've just fitted the 50 mm OmniWheels. They work fine except I am finding the reduced clearance a bit of a problem at times compared to the Brompton 60 mm Eazy Wheels they replaced. The next size up in the OmniWheel range is 80 mm which might be too tall. Anyone tried that?
Hey man, thank you for your videos! I tried to find the GoRack you mentioned in 5:13 but I could not find it in your videos. Do you mind sharing the link with me ?
Great! As usual!
5:13 it seens you are using a monowheel in the mudguard.
Love these videos
Hello from Scotland. I’ve just fulfilled a long held ambition and have bought a second hand Brompton ML6. I am very pleased with it but have a question that you may be able to help with. It has no rear rack and, when folded the front wheel is touching the ground so making it very difficult to wheel around on the rollers. Have you come across this problem before?
Hi Victor, have you tried to use belt drive instead of chains? Appreciate it if you could make a video about it. Thanks.
Great video again, love it.
Glad you enjoyed it!
Still want the GoRack in Black :-)
Hello
I am new to this channel. I wish i knew it sooner. Can you send me the link for the right bearings for Rotacastor s omniwheel?
Self amalgamating tape might be a better option than electrical tape and ties.
Not as cheap but is waterproof and bonds to itself and probably won't ever need to reapply it
What is thatbag u use for putting things in while marketing for groceries?
Hi Victor, what bag are you using whilst shopping at 3:13min?
That is a shopping bag for the Brompton Electric by Valeria's Bike Accessories, in Barcelona. They have bags for both the e-Brompton and standard one, and they are absolutely beautiful. I'll talk about them in the next couple of weeks.
@@EverydayCycling Thanks so much for your reply and all your videos. I only got my e-Brompton a week ago. I look forward to more info regarding this great bag.
Great video!
Glad you enjoyed it!
I got my foldie after your awesome videos and followed all your hacks. The latest one on Omni wheel is superb. Gonna get one. The one you had is it - 50mm Rotacaster 2-PACK with 6mm bushing - 60A?
Yes, but I ended up replacing the bushings with 6mm bearings. The 6mm bushing won't work well.
Thanks for this video, you have just sold me the s-bag :)
It seems that you have a lot of different bags. What are those, and how often do you used them, and for what purpose do you find them fit?
do you still prefer the go rack to this omniwheel setup?
Can the Omni wheels be used on the Brompton without a rack? Just the two wheels?
Probably not because they are wider and would hit your heels when pedaling
Hey Everyday Cycling I am excited, just got my Brompton today!
Now I too want to install the Rotacoster Omniwheels on my cycle but I am not sure what size to get. I seem to have missed the size and the link you shared is not working for me somehow. Can you help me out with the size of the wheels.
Brilliant videos and info as ways. Thank you would the go rack still work if you don't have mudguards (extra xwheel) or a rear rack?
? Omni-wheels on carpet, how wwell do they perform. That and rough sidewalks are my rolling problem .
I have been using a roller cart if I anticipate that, and am looking at the Sidewinder,/GoRack but with shipping that approaches $300.
Bonjour,
A question: Where did you get your front bag you used as shopping bag on your electric Brompton bike?
Dear Victor, I thank you for your Channel. Two thumbs wayyyy up. I want to get the Omni Wheels, for my Brompton, Tempest Blue just like in your clip. What a the specific specifications for this? Thank you so much.
which bag are you using in the shopping trolley part of the video ?? thanks.
I want that wheels! But any other parts should I get?
The advantage using the Omni wheels there is also with a Brompton without rack ?
I definitely think so, especially on an extender rod, if you already have one. I will test this and get back to you :)
Ok, I’m waiting for your test to understand if Omni wheels work fine also with a Brompton without rack but with an extended rod...
Thanks !!!
@@am235004 Hi, sorry for the delay. My extender doesn’t work any longer, so I had to remove it. I did install the omni wheels on the original frame, though, just for this test :-) My conclusion is yes, they work, but I don’t think they’re worth the headache. The benefit of moving sideways is not a huge addition to the experience and getting the omni wheels is a headache, plus they are not aesthetically great and are a bit clunky. On the other hand, the easy wheels are quiet and smooth and glide easily; so, overall, I’d go with the easy wheels. It might play out otherwise with the extender, but I don’t expect a large difference. When installed on the rack, however, the omni wheels may add value, since the weight is distributed in combination with easy wheels on the “back”. Hope this helps :)
@@tandago7281 Hi Loana, many thanks for your test and support :) !!!!
HI Victor, Nice Shopping bag. I like them. Where did you get it from? btw, I like the Omni wheels too.
That's from www.valeriasbikeaccessories.com
Hello. Before all, thanks for your videos. They helped me a lot while choosing my Brompton and accessories. I was about to order these rotacaster wheels but just noticed they're the same size as the 4 original wheels of the Brompton back rack. And recently I noticed that my front wheel (bike folded) sometimes rubs the floor and the rolling isn't as smooth. I'd be glad to know if you have the same problem after installing the 5cm rotacaster wheels ? Kind regards from France 🇫🇷🙂
Nice video! Can the omni wheels be enough to push the bike around or do I need to get the rear rack with wheel, like yours?
Hi, can anybody tell me what kind of bag this is at 03:18 ?
Thanks!
It's this one, for the Brompton Electric: www.valeriasbikeaccessories.com/en/brompton-electric/648-pack-shopping-bag-for-e-brompton-ukbraceadapters.html
Just what I wanted to see
Awesome!!
You shouldn't need to move the gear locknut when taking the rear wheel off. Simply slack off the gear adjuster tube.
Hi! I am super interested in the Omni wheels, just wondering, have you run into any quality issues with them? I am in a brompton chat group, some people say they are very easy to break.. what has been your experience? Thanks!
Hey! In the beginning, ist this the bike workshop at Georgia Tech?
Will the t-bag fit on the rack as well?
Hi Victor! I have added various upgrades to my M6L since I bought it in January this year. Among these, I earlier added a rack and your idea of the omni-castors. However, since adding a wheel extender and wheels, I have noticed that one of the omni-castors no longer touches any surface when rolling. It is not consistently so when rolling with the handlebars but it is when I am rolling the bike with the seat raised. Can you, or anyone else, recommend what I should do to remedy this?
Brilliant 👍
Thanks Thorsten, great to see you here!
Where did you get that wheel extender? I mean who makes it, and how do I purchase it ?
Hi! Do you recommend the rack?...I know is more stable,but how frequently you use ?
What Shopping bag do you use?
Good tips here mate! What's the lining in your electric City bag?
That is a shopping bag for the Brompton Electric by Valeria's Bike Accessories, in Barcelona. It uses the same frame as the city bag, but with a lot more space for carrying stuff, which is super nice. I'll talk about it in a couple of weeks.
Can we use 4 omni wheels for the brompton? Would we have to go up a size so the bike is raised a bit as the 60mm wheels look quite small.
cant find the reference link for the bearings, bushing and bolts ?