852 grams with the ringke fusion case, but 212 grams while caseless... Are you telling me that putting this case on makes the pixel 7 pro almost a freaking kilogram? What the hell is that clear case REALLY made out of?
Looking for a case for the pixel 7 pro with the following features Musts 1. Side edges should come above the screen for better protection. I don't understand why they don't get rid of the curved screens honestly. 2. Good camera protection 3. Supports wireless charging 4. Built in kickstand Bonus 5. Magnet on backside for car holders 7. Charging port cover 8. Integrated tempered glass screenprotector if the fingerprint still works well with it Many thanks!
@@davab. No, unfortunately not. I am not aware of any producer making such a case. Went with Spigen Tough armor. Lips on the sides where the edges are are way too low. And no magnet... Also, I was running spigen tough armour on my previous phone. The phone fell a couple of times and after a year i removed the case to realise that the backside was totally shattered. I have bought this case again because there is really no alternative with a kickstand thay doesnt look like you have a spaceship in your hands.
I went with the Ringke. It's the only one that provides scratch protection for most of the metal camera bump. Fits snug, I like the protective film that covers the inside of the back when you unbox it. The lip edge on the side could be 1-2mm higher for more side protection.
I got the Bellroy leather case for my Pixel 7 Pro and it's petty nice, it's smooth leather with no grain, so it doesn't necessarily feel luxurious, but it gets the job done. I personally like cases that don't come up too much on the sides because the screen is curved and the edge side swipe gestures are important for navigating Android.
Thanks for the vid! I have returned a few cases so for because I wanted a larger lip and better screen protection on the sides, but also a good grip. Based on your vid I went with the Hualele Slim Hybrid Case.
@@hugogonzalezyajimovich7841 I just got the case today. The side lips are better than any of the other cases I've tried and I'm happy with it. I might not feel as comfortable laying it down on the glass as I would say an OtterBox, but this is the next best thing if you don't want to carry something so bulky.
Spigen thin fit in the Spigen liquid air. Typically my go-to's. I know the speed and thin doesn't offer a lot of protection, but I have also been really lucky that combined with a white stone dome I went on a jog, pulled out my phone to change the song and dropped it. Watched it bounce corner to corner to corner until it landed. There was a nasty blemish in the case and the white stone did snap but the phone was fine. The thin does exactly what I need it to do. Unfortunately with the pro I've had awful experiences with the white stone dome so I feel like I'm raw dogging a little
I am looking for that answer as well. I already have the Caseology Parallax. It's super nice but not happy with the side protection as the edge is just flush with the glass. I hope Google stop using curved edge glass again. Apple 14 don't have curved glass.
Yours is the best I've seen! I know which one I'm getting. In between spigen liquid air and hualele thank you!. I don't know if i want to bother with a screen protector but worried it'll get cracked without one. Thoughts?
I just switched over to Pixel 7 Pro from iPhone 14 Pro. Unlike the iPhone this phone is super slippery and I dinged my brand new phone on Day 1. No more drops. Have ordered a Caseology Nano Pop.
I tried 3 cases for the 6a by Caseology. Great and frustrating in equal measure. I loved the grip/feel/look (generally) of the Athlex/Parallax cases, but wish that the side grips were "flush" with the case, like they are on the Nano Pop. Sadly, the Pop is a total fingerprint magnet! This resulted in my having to look elsewhere!
@@TheChameleon2008 the only issue I have, is I want to find a case that also covers the camera so I don't have a camera cutout because I hate when they collect dust and they can look ugly
@@jesse1794 Yea, i only buy cases that cover the camera because i have seen pics already with many scratches on the metal :( You can find great cases like that for very cheap on aliexpress or amazon if you like to pay a bit more but get it faster. I also buy the Rugged Shield cases for most my phones and i also got it for my pixel 6 and now waiting for the pixel 7 pro case :) its like 4 bucks.
How can a best cases video leave out the Supcase Unicorn Beetle Pro? Great protection. Comes with a screen protector that works great with the fingerprint sensor. Has a charging port cover. Built in kickstand. Comes with a very sturdy, rotatable, belt clip. The side edges comes above the screen. The buttons are still very clickable. Protects the camera. And it works well with all of my wireless chargers. It's under 25 dollars too on Amazon. Had these cases on iPhones and LG phones, and IMHO I believe they protect better than OtterBox Defender and LifeProof.
@@FishBeeProductions I didn't mean to flame!!! Was just trying to alert you or really others to a case brand that I truly like. When I have a new device, they are the first ones I do a search for, as I know they last a long time (I typically keep devices for many, many years), and I know from experience that they protect your device extremely well. Probably the best protection you can get, and at a great price point. I do realize very well that you are funding the purchase of the items you show, and I also realize that you obviously can't buy everything that is out there. I do appreciate your reviews!!!
I’m looking for a USB-C splitter for my Pixel 7 Pro that cann connect to its USB-C port. The splitter should have two female USB-C ports: one for connecting USB-C Apple EarPods to make phone calls, and the other for charging the phone and supporting data transfer. This data transfer should enable USB debugging mode, allowing me to use the mirroring application, scrcpy. I’ve noticed that most products on Amazon only support data transfer on the port that supports audio, but not on the charging port. Cann you recommendd a product that meets these requirements?
I have OtterBox symmetry case on mine. Probably going to take it back . Can still see some of the silver frame. When I have in back pocket and try to take out of pocket case almost comes off
I have the Tudia Merge case and I can confirm that my double-tap in the back takes screenshots successfully. BTW, I chose the option for double-tap to take screenshots.
@@FishBeeProductions great reviews and keep em coming! Can i ask, does your pixel pro 7 get warm whilst general use. E.g. browsing, instagram scrolling, google maps etc? Mine gets noticably warmer than my pixel 6a during such normal use. I'm not even accounting for 4k video shooting...just normal use. Its been a week and i'm wondering if i should send back to google for another unit. Its gone through all the updates etc and finding it weird for it to be this warm under general use. Its noticably warm even through a case. If i take the case off and do the back of the hand test, its alarming in which i would almost say its hot.
@@RBNMAN mine gets warm off and on first day i got it. You should only send it back if it's really causing an issue day to day use and or if it's hot very hot to touch so much is bothersome. Hadn't been bothersome for me yet
Good Vid, I like the large number of cases you put in it. I was wondering about one thing though, the 3rd case, the translucend one, was 850g??? how does that work?
Okay guys get a case with raised sides. My P7P screen cracked even with a glass screen protector because the case i had didn't have really raised edges on the side.
What surprised me is that most cases do not have the cutout for the 5G Antenna (specifically for (mmWave) frequency). I'm on T-mobile, which the Pixel 7 Pro utilizes this frequency for this provider, so I opted for the Tudia Merge which has that cutout.
On the one hand I don't use mm wave 5g so it doesn't really matter to me, on the other hand, it would not be complicated or burdensome to add the extra cutout for this, so really they should add it, imo.
@@greganson3627 to be honest, I'm not even sure. I read a comment somewhere that it may impact reception if you are in a dense populus area like downtown NYC. I just didn't want to risk that and plus, I like the thin design and protection that Tudia Merge provides.
Somewhat disappointed when I got my Nano Pop Case. My pixel 3s Ringke Onyx case was super grippy and showed no fingerprints. The back of the nano pop feels slippery and the smooth finish showed greasy finger marks instantly - and my hands were clean. I can't fault the case for how protective it feels - but you have to be gripping the sides to make sure it is secure.
The comments on the cases seem inconsistent. You comment on the weight of some cases as being light or a little bit heavy and yet you say nothing about the one case that is 600gms heavier than all the others. It seems like all the cases are good according to this video, even that 850gm brick gets positive comments. You did mention the case that is your favourite but seem to actively avoid saying anything notably negative about the cases. Maybe saying that something isn't your style but is good quality, is the most negative comment I can recall.
i tried to hold the P7Pro without Case, its too big for my Hands and the Surface is so smooth. Fingerprint Sensor isnt working well and face id also, but when Google fixes these Problems, Pixel will get an iPhone Killer. But those Operating Systems with Tons of Bloatware. I really hate the actual Market for Smartphones.
iPads are generally much more optimized and supported than android tablets currently, so probably the iPad. My Samsung tablet only got feature updates for about two years, where most Apple iPads will continue to get updated and will last you a while.
@@FishBeeProductions the pixel 7 pro weighs 212 grams. You're telling us that JUST the clear case (no pixel installed) weighs as much as if you stacked 3 pixels 7 pros? (212g x 3 = 636g) + the pixel 7 pro at 212g (+ 4 spare grams) = 852 g Does that make sense even if the scale displays that number?
You will not find a case with "side protection" on a curved screen. They have lips on the top and bottom. The best brands that manufactured cases this time for the Pixel 7 Pro are: Google, Zagg, Tech21 and Otterbox. I do not include Spigen, because they aren't environmental Friendly. Can't be recycled 🤦
"Clicky" isn't a word. Describing how "Clicky" each case is would be 100% open to interpretation. Does that mean the buttons of the CASE make a "click" sound, irrespective of the phone's buttons? Does it mean the force required to push the case buttons is firm or difficult? "Clickiness" makes the video difficult to watch, which is in contrast to how well you do with the rest of the video.
00:00 Intro
00:16 Caseology Parallax
01:27 Humixx Translucent
02:49 Ringke Fusion
04:07 Cyrill Stone
05:26 Caseology Athlex
06:54 Foluu Slim
08:13 Spigen Thin Fit
09:47 Caseology Nano Pop
11:10 TUDIA DualShield Merge
12:42 HUALELE Hybrid
14:03 Closing
852 grams with the ringke fusion case, but 212 grams while caseless... Are you telling me that putting this case on makes the pixel 7 pro almost a freaking kilogram? What the hell is that clear case REALLY made out of?
It is a mistake, isn't it?
Thank you, I thought I was crazy
@@newfnshow031 nah
Can vouch, had to leave it before boarding my flight the other day. It put us over Max weight limit
Looking for a case for the pixel 7 pro with the following features
Musts
1. Side edges should come above the screen for better protection. I don't understand why they don't get rid of the curved screens honestly.
2. Good camera protection
3. Supports wireless charging
4. Built in kickstand
Bonus
5. Magnet on backside for car holders
7. Charging port cover
8. Integrated tempered glass screenprotector if the fingerprint still works well with it
Many thanks!
Found it?
@@davab. No, unfortunately not. I am not aware of any producer making such a case. Went with Spigen Tough armor. Lips on the sides where the edges are are way too low. And no magnet... Also, I was running spigen tough armour on my previous phone. The phone fell a couple of times and after a year i removed the case to realise that the backside was totally shattered. I have bought this case again because there is really no alternative with a kickstand thay doesnt look like you have a spaceship in your hands.
I went with the Ringke. It's the only one that provides scratch protection for most of the metal camera bump. Fits snug, I like the protective film that covers the inside of the back when you unbox it. The lip edge on the side could be 1-2mm higher for more side protection.
nice!
I got the Bellroy leather case for my Pixel 7 Pro and it's petty nice, it's smooth leather with no grain, so it doesn't necessarily feel luxurious, but it gets the job done. I personally like cases that don't come up too much on the sides because the screen is curved and the edge side swipe gestures are important for navigating Android.
3:58 The smartphone it self weights 210 grams, but with that Ringke Fusion case it will weights 850 grams?
my scale was tired and said, wow, it's heavy lol
Thanks for the vid! I have returned a few cases so for because I wanted a larger lip and better screen protection on the sides, but also a good grip. Based on your vid I went with the Hualele Slim Hybrid Case.
And how's the sude lips on this hualele?
@@hugogonzalezyajimovich7841 I just got the case today. The side lips are better than any of the other cases I've tried and I'm happy with it. I might not feel as comfortable laying it down on the glass as I would say an OtterBox, but this is the next best thing if you don't want to carry something so bulky.
Spigen thin fit in the Spigen liquid air. Typically my go-to's. I know the speed and thin doesn't offer a lot of protection, but I have also been really lucky that combined with a white stone dome I went on a jog, pulled out my phone to change the song and dropped it. Watched it bounce corner to corner to corner until it landed. There was a nasty blemish in the case and the white stone did snap but the phone was fine. The thin does exactly what I need it to do. Unfortunately with the pro I've had awful experiences with the white stone dome so I feel like I'm raw dogging a little
850g 😲 quarantine weight gain
But very good video. makes it easier for me to choose a case 👍
LOL
@@FishBeeProductions 3:57 That must be a zero error on your scale. Could you reweigh and make a notation on the video?
Greatly appreciate the review!
Nice video !! If you were to pick 3 cases just for the "sides protection " on the display ... Which ones would you pick ? Thanks
i'm curious about this too. From the research and reviews i've seen, the TUDIA DualShield seems to have decent raised sides.
@@johntoups6338 it looks like the Spigen thin fit also
Looking for an answer to this too
I am looking for that answer as well. I already have the Caseology Parallax. It's super nice but not happy with the side protection as the edge is just flush with the glass. I hope Google stop using curved edge glass again. Apple 14 don't have curved glass.
@@AZRockRunner u must own the 7 pro and not the 7, correct?
Yours is the best I've seen! I know which one I'm getting. In between spigen liquid air and hualele thank you!. I don't know if i want to bother with a screen protector but worried it'll get cracked without one. Thoughts?
i probably would get one if you plan on keeping it a long time or if you drop your phone often
Can you do screen protectors next by any chance?
No need, look for iPhone protector reviews
Thank you.... this was a tremendous help. I made two selections for both my wife and I....
I just switched over to Pixel 7 Pro from iPhone 14 Pro. Unlike the iPhone this phone is super slippery and I dinged my brand new phone on Day 1. No more drops. Have ordered a Caseology Nano Pop.
I tried 3 cases for the 6a by Caseology. Great and frustrating in equal measure.
I loved the grip/feel/look (generally) of the Athlex/Parallax cases, but wish that the side grips were "flush" with the case, like they are on the Nano Pop. Sadly, the Pop is a total fingerprint magnet! This resulted in my having to look elsewhere!
Are you gonna make a video on screen protectors? Currently in the market for one for my 7 pro
just get any decent brand and buy your own loca glue so you can do this way cheaper.
@@TheChameleon2008 the only issue I have, is I want to find a case that also covers the camera so I don't have a camera cutout because I hate when they collect dust and they can look ugly
@@jesse1794 I got mine on Amazon and it came out pretty awesome. I don't like those camera cutouts as well.
@@jesse1794 Yea, i only buy cases that cover the camera because i have seen pics already with many scratches on the metal :( You can find great cases like that for very cheap on aliexpress or amazon if you like to pay a bit more but get it faster. I also buy the Rugged Shield cases for most my phones and i also got it for my pixel 6 and now waiting for the pixel 7 pro case :) its like 4 bucks.
@@TheChameleon2008 I meant the selfie camera with a screen protector. Mb I didn't specify
Great reviews. Like that you showed side protection.
Glad it was helpful!
Instant subscriber ... Best case reviewer I've ever seen 👍👍👍
thank you i appreciate that!
3:57 I repeated that fraction thrice to see and listen 850g. Need to hire one assistant to carry my phone..
LOL
How can a best cases video leave out the Supcase Unicorn Beetle Pro?
Great protection. Comes with a screen protector that works great with the fingerprint sensor. Has a charging port cover. Built in kickstand. Comes with a very sturdy, rotatable, belt clip. The side edges comes above the screen. The buttons are still very clickable. Protects the camera. And it works well with all of my wireless chargers. It's under 25 dollars too on Amazon. Had these cases on iPhones and LG phones, and IMHO I believe they protect better than OtterBox Defender and LifeProof.
To be fair, there's too many cases out there LOL I should call this part 1 and do a part 2 or 3!
@@FishBeeProductions I didn't mean to flame!!! Was just trying to alert you or really others to a case brand that I truly like. When I have a new device, they are the first ones I do a search for, as I know they last a long time (I typically keep devices for many, many years), and I know from experience that they protect your device extremely well. Probably the best protection you can get, and at a great price point. I do realize very well that you are funding the purchase of the items you show, and I also realize that you obviously can't buy everything that is out there. I do appreciate your reviews!!!
Andy do they have a magnet too?
Thanks Andy gonna go check this one out!
I’m looking for a USB-C splitter for my Pixel 7 Pro that cann connect to its USB-C port. The splitter should have two female USB-C ports: one for connecting USB-C Apple EarPods to make phone calls, and the other for charging the phone and supporting data transfer. This data transfer should enable USB debugging mode, allowing me to use the mirroring application, scrcpy. I’ve noticed that most products on Amazon only support data transfer on the port that supports audio, but not on the charging port. Cann you recommendd a product that meets these requirements?
Weight is an important consideration, great work!
Have you tried a casetify cas at all? Such good designs, but not sure if worth the price tag!
i used to like parallax but those colored platic part either chip off or lose its color easily
I have OtterBox symmetry case on mine. Probably going to take it back . Can still see some of the silver frame. When I have in back pocket and try to take out of pocket case almost comes off
Do any of these cases work with the back tap shortcut for the pixel? I've been looking for a case with a back cutout for that reason.
I got 2 cases for my P6, Google's and Spigen hybrid case. The tap shortcut works with both of them... And can adjust the sensitivity of the taps. ^^
most of these thinner cases will work with that
I have the Tudia Merge case and I can confirm that my double-tap in the back takes screenshots successfully. BTW, I chose the option for double-tap to take screenshots.
I typically go for the Dbrand grip case but they don't even have the dragon skin anymore
no torras case review? Humixx looks the best. Would be interested in seeing it in the green
I do like torras cases, just haven't tried one lately
@@FishBeeProductions great reviews and keep em coming! Can i ask, does your pixel pro 7 get warm whilst general use. E.g. browsing, instagram scrolling, google maps etc? Mine gets noticably warmer than my pixel 6a during such normal use. I'm not even accounting for 4k video shooting...just normal use. Its been a week and i'm wondering if i should send back to google for another unit. Its gone through all the updates etc and finding it weird for it to be this warm under general use. Its noticably warm even through a case. If i take the case off and do the back of the hand test, its alarming in which i would almost say its hot.
@@RBNMAN mine gets warm off and on first day i got it. You should only send it back if it's really causing an issue day to day use and or if it's hot very hot to touch so much is bothersome. Hadn't been bothersome for me yet
850g. The fusion case is over double the weight of the phone. That can't be right. Can it?
my scale was tired that day lol
@@FishBeeProductions Great review. Very methodical. Thank you.
Good Vid, I like the large number of cases you put in it. I was wondering about one thing though, the 3rd case, the translucend one, was 850g??? how does that work?
LOL that was a mistake
@@FishBeeProductions how heavy is it?
@@FishBeeProductions And you didn't notice that this cannot be?!?
Now i dont trust your reviews anymore...
Okay guys get a case with raised sides. My P7P screen cracked even with a glass screen protector because the case i had didn't have really raised edges on the side.
Which case would you suggest?
One of the best flashing phones in 2022
4:01 850 grams?
its heavy LOL (i may need a new scale)
I was watching the video at 2x and I had to replay that moment before I went to the comments XD
Do they all work with a Whitestone dome glass protector?
i would think so but i haven't tested that
What surprised me is that most cases do not have the cutout for the 5G Antenna (specifically for (mmWave) frequency). I'm on T-mobile, which the Pixel 7 Pro utilizes this frequency for this provider, so I opted for the Tudia Merge which has that cutout.
yeah only 2 have that which i've tested so far
On the one hand I don't use mm wave 5g so it doesn't really matter to me, on the other hand, it would not be complicated or burdensome to add the extra cutout for this, so really they should add it, imo.
Would it really have any impact though?
@@greganson3627 to be honest, I'm not even sure. I read a comment somewhere that it may impact reception if you are in a dense populus area like downtown NYC. I just didn't want to risk that and plus, I like the thin design and protection that Tudia Merge provides.
@@davidnguyen1678 I wonder if there's an app that would show that specific signal with and without a case without cutout
Has anyone been able to find a thin case that completely surrounds the camera lenses?
Try cafele
wondering how the transparent one weighed 800+
My scale was tired of weighing all the cases lol
Would be nice to time stamp the names of the cases in your video.
Somewhat disappointed when I got my Nano Pop Case. My pixel 3s Ringke Onyx case was super grippy and showed no fingerprints. The back of the nano pop feels slippery and the smooth finish showed greasy finger marks instantly - and my hands were clean. I can't fault the case for how protective it feels - but you have to be gripping the sides to make sure it is secure.
I know what you mean, I had the nano pop on my iPhone 13 and it was super grippy, more than Spigen thin fit, but other way around for pixel 7 (7 pro).
Has anyone got suggestions for a cool case that is super grippy and super protective?
Best case which protects camera Ringke?
yes if you don't like the larger opening then technically that style would protect the cameras better
spigen vs ringke matt, which u prefer ?
probably spigen
Can u suggest a screen guard/tempered glass for pixel 7
Pixel 7 regular can have many even cheap cause it's not curved screen 😀
The comments on the cases seem inconsistent. You comment on the weight of some cases as being light or a little bit heavy and yet you say nothing about the one case that is 600gms heavier than all the others. It seems like all the cases are good according to this video, even that 850gm brick gets positive comments. You did mention the case that is your favourite but seem to actively avoid saying anything notably negative about the cases. Maybe saying that something isn't your style but is good quality, is the most negative comment I can recall.
these are the best cases i've tested so far, if i get one that is bad, i don't even bother reviewing it
where to buy this 6.58?
Wish u showed all other colors that comes in some cases
Why no otterbox (my favorit one) or aug?
I do like Otterbox but a little pricey and some of their cases are better than others as far as grip goes
where can i find a magsafe cover ?
Not a lot of those out yet
@@FishBeeProductions My wife has an iPhone and I have a Pixel 7 Pro, I absolutely need it for a car mount
Mous Case is Plan B
Great video thankss
glad i could help!
Hi thank you for the Great review, may i know between the spigen and Tudia which has higher side screen protection please?
they're almost identical but i like the grip better on spigen
What happened to Ringke Fusion Case why it becomes so heavier about 800grams omg😅😅
its heavy! I need to leave mistakes like this in more of my videos LOL
Thank you for the video
Any megsafe case for Pixel 7?
not very many yet
u deserve more views
I have a interested review tcl tab max vs Samsung tab s6 lite
850g???
i should do something like this in all my videos to get a reaction LOL
@@FishBeeProductions 😄
i tried to hold the P7Pro without Case, its too big for my Hands and the Surface is so smooth. Fingerprint Sensor isnt working well and face id also, but when Google fixes these Problems, Pixel will get an iPhone Killer. But those Operating Systems with Tons of Bloatware. I really hate the actual Market for Smartphones.
Also with is better for gaming and in general ipad 9 or the tab s6 lite
iPads are generally much more optimized and supported than android tablets currently, so probably the iPad. My Samsung tablet only got feature updates for about two years, where most Apple iPads will continue to get updated and will last you a while.
iPad
What about otterbox, a crok, imo,
yeah theres too many cases to cover for this phone lol
not the best case , where is dbrand mous rhinoshield Spigen
i should do another one and call it part 2! There's a ton of good ones.
Damn. Crave should really look into someone ripping off their case lol
3:58 theres no way it weigh 800 grams with the case on lol 😂
scales don't lie lol
@@FishBeeProductions the pixel 7 pro weighs 212 grams. You're telling us that JUST the clear case (no pixel installed) weighs as much as if you stacked 3 pixels 7 pros? (212g x 3 = 636g) + the pixel 7 pro at 212g (+ 4 spare grams) = 852 g
Does that make sense even if the scale displays that number?
I'm guessing you've never heard of Latercase? Their cases are Awesome.
I haven't tried them yet
03:57: 850g 😂😂😂 so light.
Seems like an accurate scale to me LOL
@@FishBeeProductions I lol'd too hard
@4:00 850 gram with the case on... lol one damn heavy case xD
yeah it feels lighter than that though LOL
850g? Heavy than tablet lel.
Thats pure sorcery!!!! Case Nr.3 is a hefty piece of plastic for sure!
For you imperial users out there. 850g is almost 2 pounds! (1,87lb) ;D
Is the one with 850g made out of lead?🙂
LOL
Dbrand?
yes they're usually good quality but i'm not a fan of their sandpaper texture on the edges, my hands are dry enough as it is lol
None of those phones have enough protection when it comes to the screen. The lip is way too low bro
not sure if they can go up much higher without getting in the way, this is the curved screen life LOL
@@FishBeeProductions True
Nobody ever does a fingerprint test on the cases! I hate fingerprint magnets!!! Thanks for the review!!
Appreciate how you show Bible verses in your review! 👍
that was not on purpose lol
dude the ringke case 852 grams!!?? wtf lol.
My scale was tired lol
@@FishBeeProductionslol, do you also have the non-pro pixel 7? How is the software and battery , still buggy like pixel 6/6pro?
You will not find a case with "side protection" on a curved screen. They have lips on the top and bottom.
The best brands that manufactured cases this time for the Pixel 7 Pro are: Google, Zagg, Tech21 and Otterbox.
I do not include Spigen, because they aren't environmental Friendly. Can't be recycled 🤦
some have a little higher edge than others but yeah, i'm wondering if we really need curved screens after testing cases LOL
"Clicky" isn't a word. Describing how "Clicky" each case is would be 100% open to interpretation. Does that mean the buttons of the CASE make a "click" sound, irrespective of the phone's buttons? Does it mean the force required to push the case buttons is firm or difficult? "Clickiness" makes the video difficult to watch, which is in contrast to how well you do with the rest of the video.
think of clickiness as, "yeah, these are nice!" lol vs. being mushy and not as satisfying to use
i hate curved screens
Why are all these cases so boring? 😭
No way the Ringke weighs 850g! You sure??
its not, but it was for this video LOL
852g? WTF???
not really lol
850gr wtf!
LOL
Mi sono piaciuti tutti i modelli.