Always enjoy these builds. Simple, nothing fancy just functional is all it needs. Those peices are tricky with one peice. I simplify it and make it in two peices joined at the edge. But it's still going be interesting to see bambam in action see how it works out.
Thanks for sharing Brent. You have a lot of projects on the go inside your workshop. It's great that you are helping your friends out with their projects. Take care
Hot dam over an hour long and still on generator power from our big ice storm in southeast missouri.I hear the power should be on friday, which will be 4 and a have day with it and $75 a day in gas for the generator, but i am warm and watching Brent doing his thing 👍👍👍👍
Brent, I love watching your fabrication work. I got to admit I blinked and didnt know what you were working on. LOL You have one busy shop going. Take care and can't wait for the next video.
When I see large front fenders, I keep imagining 1930's cars with big goose neck pipes coming out from the side of the hood and curving downward into those fenders (something like the Auburn speedsters or the Cord 810/812's had). It's such a cool look and even though its doesn't serve much except for air flow it just makes the vehicle look powerful and fast.
Always forget to compliment you on your music selection. Very Kool! 🇺🇸⭐️⭐️⭐️⭐️⭐️👍🏻🫵🏼 Very eclectic !God bless WILDFIRE Lifts for helping out.👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Just want to say hi to you all. Ian the truck is coming along. I really enjoy watching you work. You seem like you really enjoy your work. No matter what happens you always smile and laugh and joke about it. God bless and have a blessed evening and night
It's so much fun to me to watch the stuff yo guys get done especially since I can't do it anymore shur makes having to just sit here in the house more bearable 😊
You amaze me with your knowledge of different metal working and love to watch you and how helpful you are to others. Your International pickup even rusty will be fantastic when you’re through keep up the great work.
It’s always great to watch you’re at work how you quickly solve things and get things moving sometimes big steps sometimes little steps but they all count at the end of the day👍👍👍👍
Awesome video you got done a little bit of everything you worked on the truck the model a I like the rear end of the model a how you set that spring up but other than that it was a pretty awesome video you kind of swung back and forth stay warm brother
I'm still Chopping Firewood When I lost my trees, it was stack it where there's a spot That happened to be in front of my '56 GMC 4x4 NAPCO Pickup I want my truck back!
Something to consider for a future build is a 96 Ford Explorer frame it's flatter than the S-10 has rack and pinion steering, four wheel disc brakes, four wheel independent suspension and some are four wheel drive and a Ford 5.5 inch rear member. What's not to love?
Well now, makes a lot more sense to fix a piece of crap into a driver sorta... not a power tour rig for sure. Then you have proved everyone wrong before... when you chopped the top on the 49 dodge... it made that rig come to life!! And also before I forget, great music in your videos now, just all around better.
Don't be forced to do the coupe. Do what you want to make. It is always fun to watch you make cool stuff.
Always enjoy these builds. Simple, nothing fancy just functional is all it needs. Those peices are tricky with one peice. I simplify it and make it in two peices joined at the edge. But it's still going be interesting to see bambam in action see how it works out.
One of my favorite youtubers watching another one of my favorite youtubers! Cool !
@brianhaw9398 I don't miss Brent's videos. He is my after supper cup of tea time! Lol
Yup, it puts the Half in Halfass.
Love your work Tony
Two super heroes partnering up! It's Batman and wolverine!!! Holy smoke, ❤❤❤❤ love you both, Joe, 😂
Brent its great to see how humble you are with your work. Every day's a school day Joe ❤❤❤❤
Thanks for sharing Brent. You have a lot of projects on the go inside your workshop. It's great that you are helping your friends out with their projects. Take care
Hot dam over an hour long and still on generator power from our big ice storm in southeast missouri.I hear the power should be on friday, which will be 4 and a have day with it and $75 a day in gas for the generator, but i am warm and watching Brent doing his thing 👍👍👍👍
Hang in there.
I love watching your show but maaan I'm really digging the music you have playing wooow,😊I catch ya on the next one.
Brent, I love watching your fabrication work. I got to admit I blinked and didnt know what you were working on. LOL You have one busy shop going. Take care and can't wait for the next video.
Quite a bit of work done today! Always love the endings where you and Pablo go for a ride!👍😎
Love the halfass Builds they all work out rather well Ty for takin the time to vid them
Always forget to compliment you on your music selection. Very Kool!
🇺🇸⭐️⭐️⭐️⭐️⭐️👍🏻🫵🏼
When I see large front fenders, I keep imagining 1930's cars with big goose neck pipes coming out from the side of the hood and curving downward into those fenders (something like the Auburn speedsters or the Cord 810/812's had). It's such a cool look and even though its doesn't serve much except for air flow it just makes the vehicle look powerful and fast.
Hockey pucks work good for body mounting . Great video cheers from frozen Indiana.
Getting a lot done, they are all progressing well, thanks for sharing, all the best to you and your loved ones
Always forget to compliment you on your music selection. Very Kool!
🇺🇸⭐️⭐️⭐️⭐️⭐️👍🏻🫵🏼
Very eclectic !
Always forget to compliment you on your music selection. Very Kool!
🇺🇸⭐️⭐️⭐️⭐️⭐️👍🏻🫵🏼
Very eclectic !God bless WILDFIRE Lifts for helping out.👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Just want to say hi to you all. Ian the truck is coming along. I really enjoy watching you work. You seem like you really enjoy your work. No matter what happens you always smile and laugh and joke about it. God bless and have a blessed evening and night
You sure are a wealth of knowledge to be able to go from job to job, I realize the videos make it look all together
It's so much fun to me to watch the stuff yo guys get done especially since I can't do it anymore shur makes having to just sit here in the house more bearable 😊
Really like how this project is coming along Bo,,, 😁
lots of progress, looking great, i really like the longer video, Thanks Godbless
Brent, this is good stuff! I know you said you were burned out on the Studecomino, but, Man! I can't wait for the next installment on that series.
Nice add on the rear frame Brent!
You amaze me with your knowledge of different metal working and love to watch you and how helpful you are to others. Your International pickup even rusty will be fantastic when you’re through keep up the great work.
Looking good it’s nice to watch you build love it
As per usual, another interesting video with classy music. Thanks, Brent👍
I really enjoyed your music selections in this one!
Hi My Dear Friend Very Very Great Job Sir ❤❤❤❤❤
Nice work , thanks Brent
Thanks for the video Brent.
Thanks for another , Brother !
Brint that truck is same age 1938 as me I need rebuilt I love watching your videos
Brent you are an inspiration, all the work you do, have to ask do you sleep? haha as always another great program. Take care and stay safe. 👍 👍👍👍
Great vid as always !!! Very fun project
Progress all around. Thanks Brent for the video
Poppa and Pablo sure does love cruising that's much we do know!
Boy do you have a lot of projects going!
It’s always great to watch you’re at work how you quickly solve things and get things moving sometimes big steps sometimes little steps but they all count at the end of the day👍👍👍👍
On to something fun! The Bobcat can wait!😆
A lot of work going on there , nice going, Brent
Brent that truck is same age as me I need rebuilt love your videos
Awesome keep up the good work 👏🏻👏🏻💯💯
Pablo wants you to hurry up! PABLO WANTS TO GO FOR A RIDE!!! LOL
Greets from the Philippines😊
Awesome video you got done a little bit of everything you worked on the truck the model a I like the rear end of the model a how you set that spring up but other than that it was a pretty awesome video you kind of swung back and forth stay warm brother
As always good show😊
great progress
The front view is so cool...
Thanks for sharing 😀👍
Coming along Nicely Brent Taking shsrp
I'm still Chopping Firewood
When I lost my trees, it was stack it where there's a spot
That happened to be in front of my '56 GMC 4x4 NAPCO Pickup
I want my truck back!
Brent and Pablo return!
Very interesting video thanks
If you’re pushing the powertrain back 4” or more, there’s new room opened up for a “rear steer” rac n pinion. Food for thought
Another great video 👍👍
I can hammer out patch panels, but not create my own. Nice work so far👍
Another good one!
Thanks Brent!
Two cool dudes out for cruz
You have a very steady hand with the plasma cutter. It doesn’t lie. Who is this we? Lol
Great stuff. Be well. Hi Ester.
Thanks!
Awesome work as usual
Could you do a pie cut on that patch panel for the fender 🤷🏻♂️
Yes that was team work Peace out
Of Course!! We must be you and Pablo.😊
👍👍👍
Something to consider for a future build is a 96 Ford Explorer frame it's flatter than the S-10 has rack and pinion steering, four wheel disc brakes, four wheel independent suspension and some are four wheel drive and a Ford 5.5 inch rear member. What's not to love?
Can't wait
good stuff.
We used hockey pucks to make body mounts on taxi cabs back in the day
Well now, makes a lot more sense to fix a piece of crap into a driver sorta... not a power tour rig for sure. Then you have proved everyone wrong before... when you chopped the top on the 49 dodge... it made that rig come to life!! And also before I forget, great music in your videos now, just all around better.
"WE" In reference to Me,Myself, and I...and as for Myself The Father, Son, and Holy gost... So "we" is a great reference.
Traductor en español 😃👍
Don't overthink the driveshaft, if you move the motor 4" back and the frame 4" ahead you'll be 8" closer to a fit 😉
Awesome
Nice, things always look worse before they look better.
Nice
1938 International Pickup Truck
Puppy ❤Love
Hay what about a snow cat or snowmobile motor for the bobcat 😊
How come you don’t fix and rebuild your exhaust bending machine? It would make a great video
like 47 !
Third.. ;-) greets from Germany
hi Brent happy new year , and question did you get the picture i sent you on that 37 Studebaker pickup i hope it was help full about the fenders etc.
I've thought of a name for the beast..Interstein
I personally want to thank you so much for building all these rigs out of nothing you are such a genius and again thank you...🚗🛠️🚥🫏🐴🦴🐕🐾🚜🥾🪚🏗️
Unbolt the trans cross member and flip it around instead of cutting the tab off?
This hour has 22 minutes!
OK, I've been away, just returned today from a cruise thru the Panama Canal. What's up with the White Car in the background?
Make adaptor for gm 2 barrel carb. It will solve everytbing.
How about using a hockey puck for the body mounts?
The old two barrel chevy carb would work better and you can make the adapter
Pablo was under the up stairs steps watching your friend weld it may hurt his eyes
Wassup
Thats a lot of twisted and bent steel...
At 56:40 you said "ICE" now Pablo's afraid to go outside.. smh.
but a Buick straight -- 8 in that truck
🤣🤚👏👍👍👍👍👍
No tiene doblaje 😢😢
Front fenders still look bloated