Note: After solving the SOLIDWORKS Flow Simulation results it is necessary to "Export results to Simulation" from the pull-down menus Tools > Flow Simulation > Tools > Export Results to Simulation, in order to write the additional output data required for pulling the pressure maps into SOLIDWORKS Simulation FEA.
It looks like there may have been a crucial step overlooked in this video, after the SOLIDWORKS Flow Simulation results are run it is necessary to "Export results to Simulation" through the tools menu. This writes some additional output information that is necessary for mapping the Flow Simulation results to a SOLIDWORKS Simulation FEA Relevant section of the help files: dshelp-embed.3ds.com/2023/english/UserGuide_HTML/mgchelp.htm#context=main&id=479&tag=id0c55fcc8-7c6e-487a-91d6-82105b3cf88c
Thank you so much for the video. I am wondering do you need to model the structure as shell or can you simply define a new material as well as defining assemblies and then simulate it with flow simulation?
MY VERTICAL WIND MILL PROJECT DETAIL FAN BLADE 66INCH WIDTH HIGHT 144 INCH FAN 10NOS AIR DANCITY 241 WIND VELOCITY 5.5 METER PAR SECOUND TO 15 METER PAR SECOUND HOW CALCULAT RPM HOW MUCH RPM GENARATE PLZ HELP
Note: After solving the SOLIDWORKS Flow Simulation results it is necessary to "Export results to Simulation" from the pull-down menus Tools > Flow Simulation > Tools > Export Results to Simulation, in order to write the additional output data required for pulling the pressure maps into SOLIDWORKS Simulation FEA.
It took me 5 hours to figure this out. I was just about to write a comment that without it it is impossible
Thank you for the video, I've been looking for something like this for a while.
This is an excellent video. Very informative. Thanks.
Best channel on YT
I did it exactly this way and it says there are no loads applied to the bod
It looks like there may have been a crucial step overlooked in this video, after the SOLIDWORKS Flow Simulation results are run it is necessary to "Export results to Simulation" through the tools menu. This writes some additional output information that is necessary for mapping the Flow Simulation results to a SOLIDWORKS Simulation FEA
Relevant section of the help files:
dshelp-embed.3ds.com/2023/english/UserGuide_HTML/mgchelp.htm#context=main&id=479&tag=id0c55fcc8-7c6e-487a-91d6-82105b3cf88c
@@hawkridgesystems thank you my friend!
I had the same problem! Thanks for comment that helped me too.
why after run i cant look at any result? is it because student version?
very well explained. is it possible to get a free license?
Thank you so much for the video. I am wondering do you need to model the structure as shell or can you simply define a new material as well as defining assemblies and then simulate it with flow simulation?
CAN U EXPLAIN AXIS POINT HOW TO SELECT
Thanx
MY VERTICAL WIND MILL PROJECT DETAIL
FAN BLADE 66INCH WIDTH HIGHT 144 INCH FAN 10NOS
AIR DANCITY 241
WIND VELOCITY 5.5 METER PAR SECOUND TO 15 METER PAR SECOUND
HOW CALCULAT RPM
HOW MUCH RPM GENARATE
PLZ HELP
740