Weird setup. Splitting happens right at the site itself? Perhaps the houses aren't so distant to this office. Usually you'd directly just route the output from the OLT and then split it in the neighborhood as you go
I bet the network is true fiber to the home ,when you split at your core it makes things easier and some people like it this way,no splitting happening in the field ,if they wanted to do ptp connections for there customers they can ,or they can do how they are now and using pon ,a little more expensive but can be desired by some
You can do it that way too. For management, we're splitting it in a closet and going directly to the home. Technicians go to one place for maintenance and management. The locations aren't far from this closet.
Hi. I am using a GEPON network and I'm having a problem using VLANs on them. My router manufacturer says I need to make the fibre port as well as the LAN out port (on the GEPON ONU) as trunk ports. For some reason I'm not able to figure out how to do this. Any idea how I can go about it? The GEPON devices are manufactured by Syrotech.
I want to scrap the ISP's ONT router combo. What's the best route to take? Their Ethernet ports on their ONT router only support up to 1 Gigabit I would like more as they offer 1.2 gigabit plan speeds. My personal router has 10 Gigabit and 2.5 Gigabit ports
Hard to say not knowing the full capabilities of your ISP. You’ll only go as fast as whatever they can give you. If 1.2 Gbps is the max, then you’ll need a router that can handle that at the port level and process it at line speed.
Just curious could i use a Ethernet to fiber converter to replace my on box put the apc connector in the converter that is using a sc module or would i need to have a gpon module specifically for apc because i want a more direct fiber connection to my router as ive come to the thought my ont box may be adding some sorta stack delay in my gaming sessions i have 11ms ping but it feels more like 100 ms
@@RowellDionicio as that's how they do it with mine unless I have the router I'm using a different Mac address can't connect to the internet any device copying the original routers Mac can connect to the internet if they connect to it directly
@RowellDionicio That's facts. TDMA meaning ONU that is sharing the line will take each and every bit of their turn to communicate. Multiple devices, actually does not connect at the same exact time. GPON unit governs when your modem gets its turn to communicate.
Weird setup. Splitting happens right at the site itself? Perhaps the houses aren't so distant to this office. Usually you'd directly just route the output from the OLT and then split it in the neighborhood as you go
I thought the same.
I bet the network is true fiber to the home ,when you split at your core it makes things easier and some people like it this way,no splitting happening in the field ,if they wanted to do ptp connections for there customers they can ,or they can do how they are now and using pon ,a little more expensive but can be desired by some
You can do it that way too. For management, we're splitting it in a closet and going directly to the home. Technicians go to one place for maintenance and management. The locations aren't far from this closet.
@@RowellDionicio At that point why not just go AON? SFPs are cheaper Similar to switches. You dont need an olt to manage it etc.
GPON has a max on the download of 2.5 Gbps and 1.25 Gbps up
Yeah that’s right
kaya pala na wawaala ang internet connection pag nag experiment kau. kasi still learning pa eh. T_T
Good job like job
Which vendor is that OLT from ?
I need training on this
Here’s what I first used 👉 sites.google.com/site/amitsciscozone/gpon/gpon-fundamentals
Thanks... I will go through it and I will give you feedback thereafter
Done with it. What is the next step to take?
@@akinolagundoye2765 that’s all I’ve ever taken :) there’s the vendor specific documentation but probably require a valid account to view.
Hi. I am using a GEPON network and I'm having a problem using VLANs on them. My router manufacturer says I need to make the fibre port as well as the LAN out port (on the GEPON ONU) as trunk ports. For some reason I'm not able to figure out how to do this. Any idea how I can go about it? The GEPON devices are manufactured by Syrotech.
what OLT did you use?
I want to scrap the ISP's ONT router combo. What's the best route to take? Their Ethernet ports on their ONT router only support up to 1 Gigabit I would like more as they offer 1.2 gigabit plan speeds. My personal router has 10 Gigabit and 2.5 Gigabit ports
Hard to say not knowing the full capabilities of your ISP. You’ll only go as fast as whatever they can give you. If 1.2 Gbps is the max, then you’ll need a router that can handle that at the port level and process it at line speed.
Hy I am Pakistani what price this olt
Ok ....g...p0ne olt price reply me ok
You can use pon stick with swich having sfp port.
Just curious could i use a Ethernet to fiber converter to replace my on box put the apc connector in the converter that is using a sc module or would i need to have a gpon module specifically for apc because i want a more direct fiber connection to my router as ive come to the thought my ont box may be adding some sorta stack delay in my gaming sessions i have 11ms ping but it feels more like 100 ms
It may not work because an ISP will do authentication on the box where the fiber connects.
@@RowellDionicio what if they use Mac address from your router for authentication and also I've heard u can also do this with a method of vlan tagging
@@RowellDionicio as that's how they do it with mine unless I have the router I'm using a different Mac address can't connect to the internet any device copying the original routers Mac can connect to the internet if they connect to it directly
This is a smol network? How much trafic you inject in the your network?
This site is fairly small. I'd say roughly 200 units.
Is connection shared? Thought we got away from cable slow downs.
Yes it’s shared with the passive optical splitter but the tech is different than cable
Its shared in the same way as DSL. All telephone lines/optical fibers will eventually have to run to the same place somewhere.
Yes, but it depends on split ratio how bad the slowdown will be.
And 2.5Gbps speed shared to 128 users?
They will be getting very low speed 🤔
Data is transmitted using TDMA.
@RowellDionicio That's facts. TDMA meaning ONU that is sharing the line will take each and every bit of their turn to communicate. Multiple devices, actually does not connect at the same exact time. GPON unit governs when your modem gets its turn to communicate.
Single mode to the home? Os1?
Yeah, it is single mode. Not sure if it is OS1 or OS2.
Os2
What olt is?
Adtran
And 2.5Gbps speed shared to 128 users?
They will be getting very low speed 🤔
Data is transmitted using TDMA.
@@RowellDionicio can u clarify plz ?
Even though the bandwidth is shared, a multiple access technique is used. Each user will have a time slot in which it can use for data
@@RowellDionicio Means if I have 1 Gbps plan than I will get 1Gbps so far