very nice and informative video with actual use case examples. Its rare to get real equipment demos as typically these PON videos only explain things conceptually
Thank you for the informative introduction to Huawei GPON technology! It was conducive. Looking forward to more educational videos about optical communication products.🥰
Hey man just want to comment and say i recently started a job as a network engineer working on the FTTh network for an ISP. I find your videos really helpful, as I am somewhat new to PONs overall.
This was really cool! I was just wondering if I could use two fiber optic terminals as simple media converters to convert copper to fiber. I'm trying to network a barn that's a couple of kilometers away, and a wireless link isn't optimal due to the terrain, however there's a dark fiber that the builders installed before completing the structure. I know I should use an SFP module and a dedicated media converter, but the optical terminals are so much cheaper. Thanks in advance!
As I was watching them build out the GPON network in my area I researched all of this. I was struck by how complicated the actual network must look in a rural area, I know where the splitters are but properties are spread very thin so if you look at the telephone (now fibre, I guess) poles you can see all the individual cables, some travelling quite some distance from the splitters. From there there are occasional port blocks on poles particularly where there's a cluster of properties, they seem to use 4 port versions here but I assume in urban areas they are larger but each port is fed by an individual cable from the splitter, in some parts the cable strung between poles appears thicker so I assume they bundle multiple fibres? not sure. I'm not sure where the OLT is but I assume it is in the old telephone exchange buildings, many miles away in the case of rural fibre. It works beautifully though, a gigabit to a farm is pretty impressive and super reliable.
Depends. If there was a CO close by, the OLT could be inside in an environment proof cabinet. Outside, you don't have to pay for cooling. The max distance is 17km or 10miles. The more you split, the less the distance. Some of the splits are in line and unbalanced. So I can have a 1:2 split feeding a 1:8 split. The one side continues down the street and the 1:8 split feeds businesses with more splits on the end. Cable providers use the exact same large OLTs but they can also use OLCs which are mini clamshells that look like regular cable amps with fibre in and fibre out. The OLC can run on the same power the coaxial has on it, allowing for using an existng network with backup power. Everything is spliced and the splitters are the size of cigarettes or a few stacked credit cards depending on where they are.
Thanks a lot for this really informative video. I have a ftth pon connection here in Sri Lanka and my ISP has given me a Huawei ont router which also has wireless function. I've been wondering if I could use a third party router with this ont box since it only supports antiquated wireless n.
The OLT shown in this video is a Huawei MA5800 X17 series? This would mean that the line cards can be either 1Gig or 10Gig ports interchangeably. Setting up your fiber network with GPON is only one of the options on how to form the (telecom)network. I work with the same OLT's but we simply use Point-to-Point connectivity between OLT's and home addresses. Each (duplex) optic provisions 2 separate addresses in our design. Btw, the required dBm values might differ with the use of different SFP's. Just thought it would be interesting to add this comment to your well-explained video. Oh and one more thing, the line cards are the second most expensive thing in the chassis, the supervisor cards are even worse when it comes down to economics. :) Just wanted to mention that.
If the connection is going to a splitter how is the speed set ? Is that on the customers side or is that via an assigned ip. I just thought each splitter had a address making it impossible to set the speed for the individual customer.
Both it will be done on the ONT and by the ISP. The speed is more of "software" thing - the hardware is capable in most instances of running higher speeds. That's where the VLANS come in.
I just had a home broadband installed which the guy showed me as tested at 956 MBps before he left. However, when I tested it myself, I can't seem to get it downloading/ uploading more than about 95 MBps. Do you know if it is possible for him to have programmed the GPON router thing is limiting the speed? I am thinking of purchasing a new GPON unit from Aliexpress to see if it improves the speed in case it is something inside the router unit that is limiting my max speed
There can be initial configuration issues. The speed is set both by the ISP and the fibre provider via the VLANS. I have had issues when I initially got my fibre and the speed was set to 10mb/s. I'd suggest you speak to the support staff for you fibre.
It sounds like your equipment is on a 100 Mbps port. Do you have a Gigabit switch? Everything in your network needs to be at least 1 Gbps equipment for you to achieve 956 Mbps.
There is another possibility, that you are confusing Mbps with MB/s. They are not the same, in fact the values in MB/s are exactly 8x smaller than Mbps. You should expect 119 MB/s in download speed reported by most apps. If you need to know the connection speed in Mbps most Speedtest places will tell you in the correct unit.
Well, your attenuation figures are a bit off: On the ONT side, you need to be between -8dBm and -28dBm (Class B+ ONT, 99% falls in this category). On the OLT side, there are a lot of Class C+ optics already, in this case you need to be between -12dBm and 32dBm. By using Class C+ modules at least on the OLT side, you can get 2-3dBm better performance even if your ONTs are Class B+ only, due to higher transmit power, and better receive sensitivity. Of course, even for your farthest customer, its better to take a 2-3dB margin, keep in mind that the fiber will age, so I would not plan for any endpoint below -25dBm.
By cable you mean coax? You can run only fiber from centrall office or street cabinet, no power inbetween only optical signal and splitters and spliced cables.
@@wiziek What do you mean? Ever heard of FTTH? With cable I meant coax. What cable service and GPON have in common they're split. Cable doesn't seem to have a good reputation. So is it also a big deal with fiber? How bad of a choice would GPON be when comparing GPON with AON?
@@TheOpticalNetworker Oh, that was the word I couldn't remember. That was the answer I hoped for. I trust you for this answer to be substantial. How much is GPON better than DOCSIS? Also, can a GPON subscriber have a VLAN ID with tag, so I can use the fiber as a trunkport to connect to a tagged SFP port to eliminate the need for a converter/sort of modem? My idea is to split private internate gateway and business internet gateway (seperate internet subscriptions).
@@Mi_Fa_Volare Okay your english is difficult to understand. If you want more detail on the advantages of FTTH over DOCSIS you can google that. As I understand you want to connect your directly to a switch or some other device to avoid your ISP router. You would need to speak to your ISP about that.
Thanks for the clear explanation. I reallywant to see how the network works outside this at the exchange level. Your videos seam to be the only with clear explanations. And show the physical hardware rather than just diagrams.
Hi mate. I have been enjoying your chanel. Pleeas I want to get into fibre optic as change of career. What sort direction would you give me, training courses and centre and cost ? I live in North West of England. Thanks
Hi I trained with the Fiber Optic assoication and that's how I got into fibre. They have school worldwide and it looks like they have schools (not sure about the North West) here's the map foa-approved.org/map.htm. Try doing the CFOT course and taking it from there. They have free resources on their website: www.thefoa.org/tech/ref/contents.html#Understanding Your best bet is getting practical experience. Try phoning a company like Gigaclear and find out what they are looking for. I'd only take this job if you like hands on work and getting dirty. It can be messy tough job at times but I loved it. It's nice not being in an office.
Hi, Have you landed a job in this field, yet? I'm an Electronics and communication engineer, And just graduated, I want to get a job as an engineer in this field. I have good knowledge in networking, I took fiber optics at university and it was all theory so when I graduated I decided to study about CFOT (I'm halfway in) because I want to be as familiar as possible with technician work. like cables and splicing and instruments I'm a bit lost Could you advise me on what to focus on so I can go and earn the job from the first interview.
I'm not feeling confident with that Huawei equipment given their horridious track record of IP thief & low quality. Everytime see Huawei, I think of 'avoid'.
very nice and informative video with actual use case examples. Its rare to get real equipment demos as typically these PON videos only explain things conceptually
Alot of thanks. This is the best channel to explain FTTH . Many thx from Mauritania
Thank you for the informative introduction to Huawei GPON technology! It was conducive. Looking forward to more educational videos about optical communication products.🥰
Hey man just want to comment and say i recently started a job as a network engineer working on the FTTh network for an ISP. I find your videos really helpful, as I am somewhat new to PONs overall.
Network engineer? Maybe more like installer/technician?
@@wiziek No sir, we have field techs that do the installs
0:24 @@netdevnick
Did I just see an Openserve box?? I've come across a real gem. This is a wonderful video!
None of it is Openserve.
@@TheOpticalNetworker at 3:14 ? What FNO is that?
@@mathebus Sorry I thought you were referring to the OLT.
Thank you for explanation and pure English speech
You are welcome
This was really cool! I was just wondering if I could use two fiber optic terminals as simple media converters to convert copper to fiber. I'm trying to network a barn that's a couple of kilometers away, and a wireless link isn't optimal due to the terrain, however there's a dark fiber that the builders installed before completing the structure. I know I should use an SFP module and a dedicated media converter, but the optical terminals are so much cheaper. Thanks in advance!
You would use media converters. It depends on what fibre you are using (Single or Multi Mode), the distance and the connectors on each cable.
@@TheOpticalNetworker can a gpon give a customer a 1Gbps connection?
Yeah theoritaclly they could give users 8gbit max. Only if one user uses it at a time.
As I was watching them build out the GPON network in my area I researched all of this. I was struck by how complicated the actual network must look in a rural area, I know where the splitters are but properties are spread very thin so if you look at the telephone (now fibre, I guess) poles you can see all the individual cables, some travelling quite some distance from the splitters. From there there are occasional port blocks on poles particularly where there's a cluster of properties, they seem to use 4 port versions here but I assume in urban areas they are larger but each port is fed by an individual cable from the splitter, in some parts the cable strung between poles appears thicker so I assume they bundle multiple fibres? not sure.
I'm not sure where the OLT is but I assume it is in the old telephone exchange buildings, many miles away in the case of rural fibre. It works beautifully though, a gigabit to a farm is pretty impressive and super reliable.
An ISP near me has a closure per customer. They use spliced cables, not connectorized ones.
Depends. If there was a CO close by, the OLT could be inside in an environment proof cabinet. Outside, you don't have to pay for cooling. The max distance is 17km or 10miles. The more you split, the less the distance. Some of the splits are in line and unbalanced. So I can have a 1:2 split feeding a 1:8 split. The one side continues down the street and the 1:8 split feeds businesses with more splits on the end.
Cable providers use the exact same large OLTs but they can also use OLCs which are mini clamshells that look like regular cable amps with fibre in and fibre out. The OLC can run on the same power the coaxial has on it, allowing for using an existng network with backup power. Everything is spliced and the splitters are the size of cigarettes or a few stacked credit cards depending on where they are.
Thanks a lot for this really informative video. I have a ftth pon connection here in Sri Lanka and my ISP has given me a Huawei ont router which also has wireless function. I've been wondering if I could use a third party router with this ont box since it only supports antiquated wireless n.
yes
wavelength is not the frequency of the light. Wavelength varies and this gives us colors of the light
Thank you Sir. Hope you will upload more videos. This is very educational.
It's a pleasure. I will at some point.
You should do a video on different between GPON & XGS-PON and possibly a separate video on the next gens like 25G and 50G Pon technologies.
I am watching this video over a FTTH Internet connection.
It is amazing episode, can you specify what type of boards on OLT?
Very informative video. Thank you
This is the same way the new FTTH works in Oman. ISP's use TR069 for ACS and they require the serial number of the ONT too.
Good to know.
The OLT shown in this video is a Huawei MA5800 X17 series? This would mean that the line cards can be either 1Gig or 10Gig ports interchangeably. Setting up your fiber network with GPON is only one of the options on how to form the (telecom)network. I work with the same OLT's but we simply use Point-to-Point connectivity between OLT's and home addresses. Each (duplex) optic provisions 2 separate addresses in our design. Btw, the required dBm values might differ with the use of different SFP's. Just thought it would be interesting to add this comment to your well-explained video.
Oh and one more thing, the line cards are the second most expensive thing in the chassis, the supervisor cards are even worse when it comes down to economics. :) Just wanted to mention that.
Are you able to run combopon with the MA5800?
Thank you for this! Great info!
Great video, hoping you make videos on different ISP’s and their service
What do you mean? The physical topology of these networks remains mostly the same.
TheOpticalNetworker for example what makes company X better then company Z, in terms of speed and connection stability.
Why can't use the other Lan port? This make it compulsory to have a switch then
normally the serviceprovider deliveres a router to connect to the ONT
If the connection is going to a splitter how is the speed set ? Is that on the customers side or is that via an assigned ip. I just thought each splitter had a address making it impossible to set the speed for the individual customer.
Both it will be done on the ONT and by the ISP. The speed is more of "software" thing - the hardware is capable in most instances of running higher speeds. That's where the VLANS come in.
@@TheOpticalNetworker could you do a video explaining VLANs?
You can just search for VLANS on youtube there's nothing specific about them in the case of GPON.
so useful for beginners , well done bro
Glad to hear that
very simple yet useful video.
You know your stuff make more videos on the fiber. big gap 2 years ago since last video
I have other obligations;)
Thank you brother for this amazing explanation 🌹
Good vid this mate. 👍👍
I just had a home broadband installed which the guy showed me as tested at 956 MBps before he left. However, when I tested it myself, I can't seem to get it downloading/ uploading more than about 95 MBps. Do you know if it is possible for him to have programmed the GPON router thing is limiting the speed? I am thinking of purchasing a new GPON unit from Aliexpress to see if it improves the speed in case it is something inside the router unit that is limiting my max speed
There can be initial configuration issues. The speed is set both by the ISP and the fibre provider via the VLANS. I have had issues when I initially got my fibre and the speed was set to 10mb/s. I'd suggest you speak to the support staff for you fibre.
It sounds like your equipment is on a 100 Mbps port. Do you have a Gigabit switch? Everything in your network needs to be at least 1 Gbps equipment for you to achieve 956 Mbps.
There is another possibility, that you are confusing Mbps with MB/s. They are not the same, in fact the values in MB/s are exactly 8x smaller than Mbps. You should expect 119 MB/s in download speed reported by most apps. If you need to know the connection speed in Mbps most Speedtest places will tell you in the correct unit.
who is the slack box manufacturer?
Well, your attenuation figures are a bit off:
On the ONT side, you need to be between -8dBm and -28dBm (Class B+ ONT, 99% falls in this category).
On the OLT side, there are a lot of Class C+ optics already, in this case you need to be between -12dBm and 32dBm.
By using Class C+ modules at least on the OLT side, you can get 2-3dBm better performance even if your ONTs are Class B+ only, due to higher transmit power, and better receive sensitivity. Of course, even for your farthest customer, its better to take a 2-3dB margin, keep in mind that the fiber will age, so I would not plan for any endpoint below -25dBm.
I worked on GPON networks and those were the losses we worked with.
Like me he works in the field...I was coming to show my expertise but you said I
from what i ve seen over -18 it goes downhill for ont and for OLT it s around -14
thanks. but u r tom holand aren't i?
thankyou it is so helpful!
Is GPON somehow unattractive or is it superior to cable's distribution concept?
By cable you mean coax? You can run only fiber from centrall office or street cabinet, no power inbetween only optical signal and splitters and spliced cables.
@@wiziek What do you mean? Ever heard of FTTH? With cable I meant coax. What cable service and GPON have in common they're split. Cable doesn't seem to have a good reputation. So is it also a big deal with fiber? How bad of a choice would GPON be when comparing GPON with AON?
GPON will perform better than DOCSIS
@@TheOpticalNetworker Oh, that was the word I couldn't remember. That was the answer I hoped for. I trust you for this answer to be substantial. How much is GPON better than DOCSIS?
Also, can a GPON subscriber have a VLAN ID with tag, so I can use the fiber as a trunkport to connect to a tagged SFP port to eliminate the need for a converter/sort of modem? My idea is to split private internate gateway and business internet gateway (seperate internet subscriptions).
@@Mi_Fa_Volare Okay your english is difficult to understand. If you want more detail on the advantages of FTTH over DOCSIS you can google that. As I understand you want to connect your directly to a switch or some other device to avoid your ISP router. You would need to speak to your ISP about that.
Thanks for the clear explanation. I reallywant to see how the network works outside this at the exchange level. Your videos seam to be the only with clear explanations. And show the physical hardware rather than just diagrams.
Glad it was helpful! It's based on my experience working on GPON networks.
Hi are you working at huawei SA?
Great video thanks!
My pleasure
hey I am a Huawei software engineer and I write softwares for OLT devises. XD
How did you get into that field?
Can we communicate,you show me how,I'm optic fiber technician
doest it written in c?
Sponge bob also works in Huawei?
I really like your accent
Hi mate. I have been enjoying your chanel. Pleeas I want to get into fibre optic as change of career. What sort direction would you give me, training courses and centre and cost ? I live in North West of England.
Thanks
Hi I trained with the Fiber Optic assoication and that's how I got into fibre. They have school worldwide and it looks like they have schools (not sure about the North West) here's the map foa-approved.org/map.htm. Try doing the CFOT course and taking it from there. They have free resources on their website: www.thefoa.org/tech/ref/contents.html#Understanding
Your best bet is getting practical experience. Try phoning a company like Gigaclear and find out what they are looking for. I'd only take this job if you like hands on work and getting dirty. It can be messy tough job at times but I loved it. It's nice not being in an office.
@@TheOpticalNetworker thanks. I will try . Sitting in the office is boring
Tell me about it. I miss being in the field.
Hi,
Have you landed a job in this field, yet?
I'm an Electronics and communication engineer, And just graduated,
I want to get a job as an engineer in this field.
I have good knowledge in networking, I took fiber optics at university and it was all theory
so when I graduated I decided to study about CFOT (I'm halfway in) because I want to be as familiar as possible with technician work. like cables and splicing and instruments
I'm a bit lost
Could you advise me on what to focus on so I can go and earn the job from the first interview.
Can a downlink be on 1310nm and uplink be on 1490nm?
Scientifically and theoretically yes. But the standard is not set in that way, if you do that the ont wont be able to recieve your singals.
Very educative
Best regards from Dial-Up connection (56kbps)
You poor soul:(
Hey man u in south africa?
Can we work together
hello friend, from which country u belongs? i need some information about huawei ONTs! thaks
Then use google and huawei support website :).
South Africa
The only thing you need to know about Huawei is STAY AWAY. AVOID AT ALL COSTS.
Thank you.
Love from Pakistan
thank you
Bro is this router good or bad plz rply
What router?
Thanks
😮
Hello
Sir
Give me jobs
spider man
can you help me with a mini project?
How?
Did he say ex-boyfriend? Ew
I'm not feeling confident with that Huawei equipment given their horridious track record of IP thief & low quality. Everytime see Huawei, I think of 'avoid'.
your boyfriend? you are gay?
Ex-boyfriend. Yes I'm gay though only on weekends.
@@TheOpticalNetworker meaning the rest of the week you are bisexual?
@@TheOpticalNetworker hey as a fellow engineer thanks for being true to yourself
Sorry, it’s made by the CCP...
And?! Makes no difference!
what The Hell 🤢 " You Have Ex-Boyfriend " 🤮
Jealousy will get you nowhere
You got a problem with that?
look we found the person with negative IQ
@@johngalloway4939 🤣😂 jealousy seriously !! you must be like him dude,,, hahahaha but i'm not !!! i hate that
@@TheOpticalNetworker yes !
Wow good. Can you provide me your email for further explanation
nice but i stopped the video at the ex-boyfriend part
South Africa has internet, I thought they used drums 🪘 for communications 😮