Laser Cutting Nozzle | Problems and Solutions of Laser Cutting

Our Store/Nuestra Tienda: spierlaser.en....
Contact Us: [phone], [e-mail]
The video is related to the laser cutting nozzle, we talked about the nozzle usage, problems and solutions for the laser cutting operation.
For fiber laser cutting machine, the nozzle plays important role.
1: It collects the capacitance signal and transmits it to the signal processor through the ceramic ring, so as to keep the distance tracking of the laser head to the workpiece;
2: Guide the auxiliary gas to pass through;
3: Gas pressure is formed at the nozzle outlet to speed up the cutting, take away the slags, and protect the inner lenses of the cutting head.

[@delwarhossain2977]

you are doing good job and it's help all of us

[@ClaraChai]

😀Please tell your friends I am here, thank you.

[@bogdanilietalmaciu7912]

Hello Clara! Please explain to us the logic behind the choice of nozzles. Depending on what exactly do we choose a certain nozzle? How do we know we've chosen the wrong nozzle? Thanks!

[@ClaraChai]

Could you find the answers from my nozzle videos?

[@abhilashkp9918]

Hai madem, can you please explain how to set reference ponts for a nested pgm, and if I stop the cutting in the middle of the program, how can I come back to the starting point?, and how can I jump to the point where I click the stop button for resume the program? in MESSER system there is an option "jump to line number" but in Sypcut I am not aware about the process, can you please explain it?

[@___-ws5lm]

Привет из России. спасибо за канал

[@ClaraChai]

Glad you like it.

[@jacquesbezuidenhout3606]

Hello I have one very important question please help whe bought a gf 1530jh Fibre laser machine golden laser and sometime whene I cutt it just like dry cut it's cutting but no sparks dry cut and the laser source alarm comes ons shutter closes and does not whant to open

[@ClaraChai]

I am not sure I could get all. Since it is important, have you tried to contact your supplier?

[@Abdulbasit-di9cj]

You doing great Job

[@ClaraChai]

Thank you

[@osdarproanio8051]

Hi Clara, I wanted to know if it has happened to you that I cut at high speeds over 250mm/s and sometimes the center moves and the cut comes out wrong as if it were off center.

[@ClaraChai]

The center means the nozzle center? I think you could get something from membership videos.

[@fatiheltun2814]

Hii clara

[@testimonyhub6397]

My laser head is jumping while cutting. The nozzle does not touch the plate. It touch and jump what is the cause

[@ClaraChai]

I could not reply you with so less info.

[@user-js3tg2dd9e]

hi, I cut in a common cut it is 5 hours program but the light is off and my machine is shut down
what is the option to continue cutting as the last stop I know PT CONT. option is available but sometimes
it doesn't active so give me a second option.

[@ClaraChai]

'Task' could be a little helping.

[@night_grinder1378]

Good evening. For my laser machine I always encounter overheating problem every 30mins. Im using air cutting only for 2mm. Power of my laser was 2kw. What should be the problem ? Thank you in advance.

[@ClaraChai]

What kind of heating? Nozzle heating? If it is nozzle, you can check a short last month.

[@night_grinder1378]

@@ClaraChai the cutting head itself

[@kenjiroryuki]

hi carla, I have a problem with a 6000W laser machine with a Raytools BM114 type laser head. and cannot stably cut carbon steel plate above 14 mm thick. how much influence laser power with laser head type for good result?

[@ClaraChai]

I think 14mm is not so thick for 6kw, probably it is parameter setting a or some other factors.

[@pankajpatil789]

Make One vedio on parameter Setting.

[@ClaraChai]

Could you just add a “please” to your sentence?

[@magicalcolormattelcutting366]

@@ClaraChai 👌👌

[@mohamedrezk5797]

❤😊

[@sujitnadkarni866]

We are facing nozzle heating issue. Can you guide why

[@ClaraChai]

One of my short will help you.

[@rodgerdodger7753]

Which nozzle is best for cutting 2mm carbon steel with gas

[@ClaraChai]

1.2 or 1.5 double

[@jabranehicham655]

slt svp j'ai un problème la commande shutter non répond pas les autres commandes si et je peux procédé au découpe sans l'éteindre

[@ClaraChai]

L'obturateur n'a pas pu s'éteindre ?

[@durgvijaykumar7074]

Hello mam...

[@Babli2925]

I want nozzle

[@ClaraChai]

[phone], please tell me your models.

[@nithinjose9892]

My laser machine kullu karbutha

[@testimonyhub6397]

My laser head is jumping while cutting. The nozzle does not touch the plate. It touch and jump what is the cause

[@ClaraChai]

Tell me more.