I put 24v to mine and i keep blowing fuses. So i dropped it down to 18v and it only goes in low. If i switch to high it goes for a second and then shuts down.
good morning from colombia, i have a question.... i woud like to connet four rs 550 35000 rpm motors for daughter's jeep 4x4, but when i did the speed controller can't support. how to do for funtion correct .
Are the motors rated for 24 volts? If they are not, they may work for a few days but will likely burn up under that much load. I haven't experimented with 4 motors on the speed controller. We will likely be pulling too much amperage with that many motors connected.
Lebih elok 12v-36v kan?..6v bayi 6month-1year mungkin ok la...next
I put 24v to mine and i keep blowing fuses. So i dropped it down to 18v and it only goes in low. If i switch to high it goes for a second and then shuts down.
sounds like no speed controller
good morning from colombia, i have a question.... i woud like to connet four rs 550 35000 rpm motors for daughter's jeep 4x4, but when i did the speed controller can't support. how to do for funtion correct .
Are the motors rated for 24 volts? If they are not, they may work for a few days but will likely burn up under that much load. I haven't experimented with 4 motors on the speed controller. We will likely be pulling too much amperage with that many motors connected.
@@ProjectNineOaks 12 votls i think that maybe use two speed controller and the power supply jr-1816rxs-12v is the original part
Lithium ion is better. Still cool though.