What Temperature Develops the Tec1 12715 Peltier Module with W1209
HTML-код
- Опубликовано: 5 сен 2024
- Here you can see the products which i used in this video
Module Peltier AliExpress s.click.aliexp...
Radiator and Cooling fan; AliExpress s.click.aliexp...
30g Thermal Grease AliExpress s.click.aliexp...
See my blog video:diy-tipstricks...
In this video, I'll show you what temperature we can get from peltier module
Thank you for Watching . And do not forget, Like and Subscribe
Due to factors beyond the control of DIY Tips&Tricks, it can not guarantee against unauthorized modifications of this information or improper use of this information. DIY Tips&Tricks assumes no liability for property damage or damage incurred as a result of any of the information contained in this video. DIY Tips&Tricks recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of DIY Tips&Tricks, no information contained in this video will create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from the improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not DIY Tips&Tricks.
See my facebook page / diy-tipstricks-1648900...
► Music provided by: No Copyright Songs - Best Of
► Jim Yosef - Link (No Copyright Sound Best of): • Video
I like this a lot. Some ideas!
Theoretically this could be used as a low power high performance component for atmospheric air to water generator, or the process could be reversed for a gray water evaporator. 2 of them could be used as a low power high yield driver for a sterling engine generator.
nothing of that sort , this is not low power , this is high power ,eats up 50W in a snack , 100W if you push it like here , that empty's a battery in 30 minute's . 15A that is a lot
How hot does it get? And also can you submerge this in water and will it be fine?
what are the configurations made in the w1209 temp controller? I am having trouble maintaining my desired temperature. it gets cold for a brief moment then the temperature raises back up even if I have proper heat dessipation.
Hi
Search here in the description section www.aliexpress.com/item/32952298620.html
Hello. There. Just recently viewed your vid. I am just confuse. I followed your video and i just use tec 12706 since its the only one available and use same heatsink with fan though i just use an aluminum heatsink but i put some copper wire around it. After connecting it to the power supply, i waited but unlike in your video, there are no frost or it did not cool the same as yours. Can someone help me. I will be using it with my cooler. Did you put the side with numbers on the copper heatsink? And the hot side on the heatsink with fan??? Pls help. Thanks
How abaut temperatur in the room ? in celsius ?
LIKE........but in late hot?? what temperature?
In winter my peltier reaches -8.1 but in summer it only forms water on the heatsink
Can you tell which current supply you use
liked the project, hated the music. ¿What is the model of the termometer temperature control?
W1209
Agreed, so many people use loud annoying MIDI music as a background.
If it's not music they recreationally listen to themselves, why even use it.
How much amps did you apply for the peltier?
whats the heatsink you used on the cold side?
How long hours it can run???
I'm trying to 15am peltier and use same heatsingh which you are using.
But It cools down for a while and then gets very hot on side of heatsing...plz help.
Thanks for the video. Are you using cheap chinese peltiers or quality ones?
He has it listed in the description for like 4$ but i bet I’m a little late
Los mejores peltier son los chinos baratos. Funcionan mejor que los caros y son más económicos
So you dropped 40 gramms (say 30gr alloy heatsink, 10gr half of peltier - silica) of substance to -20 in 3 minutes. 40gr of alloy should have specific heat similar to around 10gr of water. 10gr of water every 3 min is 200gr every hour. That gives you around 7W of cooling power.
You see, the problem is - just like soldering iron, weak uses 12W of energy to heat up to over 300 deg. But you can't boil a kettle with it, can you?
In a same way you can't built fridge using 7W cooling power and wasting 180W of heat. Fridges power starts 200W with around 50% efficiency. So you need 14 peltiers. 12V times 15 Amp times 14 = 1520 Watt waste heat, 100W cooling power
You might have -20 deg, but as soon as you move some air around your cool heatsink... You just don't have enough power.
is it 7 watts per second???
7 joules per second
You're right only good to make mini fridge
im use 10 peltier but cable wire is go very very hot burning what number wire I use to please help me answer me
Sir can u please tell me what is the power supply u used and its rating
Xbox 360 power supply 12 volts 12.1 amps output the Tec1 12715 Peltier Module is rated 15amps.
If I take TEC1-12706 peltier module and I gave to it 12volt,6amp at room temperature 35 degree Celsius then after 1hour what will be the min temperature at cold side and max temperature at hot side
its okay if i use 3pcs of peltier tec 12715 for 12v 30A power supply
If used 10 pleteir type TEC 12715 what power supply in kv is suitable to used and what the rated current for 20 pecis
I need to replace a broken peltier. It consumes 5A at 10.5V. I bought a 12V10A peltier (TEC1-12710) but it only consumes round about 3A at 10.5V.
Any ideas why?
The cooling power is not sufficient..
its internal resistance is higher i guess , you can check in specs
Bro agar thermoelectric grease na miley to aur kuch lgaa sakte hain ke nahi
And what about 12706 maximum temp Drops ?????
What was surrounding temp when you used it?
AND CAN IT BE USED TO COOL WATER BELOW 15DEGREE CELSIUS WHEN SURROUNDING TEMP IS 40 DEGREE CELSIUS
Maybe stacked peltiers?
How much electricity UNIT consume ?
the TEC12715 should consume around 120W
can you write the heat side temp? or temp of warm air from fan? everybody test the cooling but nobody measure the heat :-( thnx
Bhai maysonic ki copper plate kahase li he online link send karo na nd TEC modules ka model kon sa use kar ne ka to -20 tak ja sakh ta he plzz bata na
Is it possible to get a close temperature using batteries (for portability). The temperature doesnt have to reach negative, but at least single digits
É Possível que sim, porém não duraria muito tempo devido ao consumo. Poderia usar uma bateria Lipo 3S, mas descarregaria rapidamente.
Aha! Microsoft power supply! That's why it's frost! :)
Esa peltier es a 15 voltios y 15 amperios con razón el rendimiento
Sí ,demasiado amperaje para algo tan pequeño.
Hiii
Which peltier is used for making in fridge
Can pls any one help me
Nice
When set box mini a.c how much area be cool 10×10 room be cool
Get colder without copper heatsink.
Dose there any size for the pileter
Nice Project Bro.. tell me if i use 12706 instead of 12715 Peltier Module. Any changes in temperature? or remain same as 12715.
Mir Shahzad Hassan Talpur 12706 give u up to -5°C Max and 12715 is up to -20°C it take havey power 12v 6Amp.
To compare, look at the watts, that is the amount of power used. The one used 12715 can use up to about 140 watts. The 12706 only utilizes about 60 watts or less. More watts, more cooling ability, but more current draw. The 12715 has the capacity to cool twice as much generally. A more expensive unit 12726 has much more capacity, 400 watts. I actually ordered one each of the smaller ones 12706 and 12715 today for the first time (Banggood). I think the 12715 he used is a good compromise. A limitation for other people might be the capacity of a regular car cigarette lighter outlet.
@@garywheeler7039 which peltier is best.12v 15 amp if I use then power supply will be 12v and what wan amp use
@@sumanasenterpricesumanaroy7338 : 15 amps is a lot to push through a little wire. In the US, that means a wire of 14 gage (1.63 mm) or larger copper wire or equal for fire safety. Otherwise the wire tends to overheat. Using larger wires always means higher efficiency of course and less wasted energy dissipated as heat. Sometimes the peltier units that have lower wattage, might be more efficient also. In a particular application. It kind of depends on the amount of heat or cool, your unit is able to transfer at a particular time. It is a little over my head not understanding the calculus of it all. The efficiency or thermal conductivity of the heat sink and so on. A possible 'bottleneck". That is, higher wattage capacity is not always better especially as they become more inefficient as the get hot and if the unit gets too hot is stops working I am told.
It's needed to add same big heatsink both sides
No only to the hot side
What was the ambient temp ?
Hi
The ambient temperature is the one from which the test started 28 °C
does a peltier last for long
How to know is it original or copy I was order 2 12706 both copy 😡
رائع جدا
I am using Chinese peltier, but it is not decreasing temperature less than 29 C. Can anyone help me why isn't cooling.
When I bought first peltier it was freezing in open condition but now it's performance dropped within a week, neither it consuming more than 2 amps current nor cooling to freeze either in a small covered box. It is 12706
Notice that you should disipate heat from hot side, otherwise you won't get the response,maybe you don't use silicon grease between your modoule.
I know that by using peltier element can achieve temperature up to -70 celsius. I see that in device. But i can't find such element :(
If somebody know where I can buy it, please say :)
@@logic0905 you can buy it online on amazon,ebay,banggood by searching thermal grease
I use termocunductive paste. That don't help decrease temperature on cheap peltier under -19-20 C.
19906 peltier use it
where did you buy the headsink device?
U have used the controler just for measuring the temperature.
Am I right?
no answer but i think u guess right
For what all those dance? What is a current / voltage on the Peltier module?
Now it looks like a circus manipulation,only.
peltier ke priec kaya ha or kha sa bay kya ha
How much volt use sir,
its okay to use 12v 30A for this peltier?
ok
What is consumption of electricity
12x15 = 180 watt max.
Bhai kitana hot hota hai usaka bano plz
Bro asli peltier ki pehchan Kia he
Hey just wondering what heatsink and fan are you using? the link in your description does not seem to be the same heatsink
The link I put in the description is for a cheaper heatsink.
Here you can find the other: goo.gl/p2Afoy
Im a little confused since the link you just posted has a heat sink with a base that is 35mmX48mm but the peltier(TEC1-12715) has dimensions of 40mmX40mm so parts of the peltier wont be in contact with the heatsink. But in your video it seems to fit fine (see at 0:22 ). Are you sure its the same heatsink?
I have put an aluminum plate over the heatsink surface. If you do not have it, it has nothing, it works and you can mount the peltier module in the middle
*Free Wather?*
Wow This is so much good for my CPU
bak j lol it Creates moist and ruined your cpu
Did u give 12V 15amps?
No.
from an Xbox source. 12V 12A
@@CMCdiy can I use my 12V 0.18A fan with 12V 7A supply?
Of course. you can use any amperage,
it is important not to overtake the volts
Hi, COuld you please let us know, where did you get that heatsink+fan ? I couldn't find that specific type in Aliexpress or eBay.
Much appreciate your quick response. Thanks.
Hello . sorry for late answer , you can buy it from here
goo.gl/ptR2wT
The link you posted does not have the exact radiator and cooling fans. Could you please provide us with a exact link. Thank you.
Here you can find: goo.gl/p2Afoy
a suggestion that seems correct to me (the fan is included)
www.banggood.com/fr/12V-DC-CPU-Quiet-Cooler-Heatsink-Fan-With-4pcs-6mm-Heat-Pipes-p-1076028.html?rmmds=search&cur_warehouse=CN
not working.alwyas heat no cool
I think one side is cool and one side is heat...
What kind of peltier did you use? 12v 7amp?
Hi Romeo .I use Peltier (TEC1-12715) 12v-15amp
Here you can see the products which i used in this video
goo.gl/H1sdFQ
it was 15 amp, you can tell by the last 2 numbers in the 127xx code
What’s the power supply used?
Hello Alejandro.
I used a 12v 12 amp transformer.
You can see it here ruclips.net/video/8rwda3PtXw0/видео.html
What if connect my pelteir to alternating current
Rishabh Gupta good question.. But of course step it down to 12v.
Idk what wil happen too.
It will not work.
If you switch the positive and negative the hot and cold sides are switched as well. So if you do that 50 or 60 times a second both sides stay at room temperature.
Czar Zenana that's my speculation too..
But will still try someday. :)
It will actually get warm on both sides because of the power that is consumed by the peltier module.
I am using Chinese peltier, but it is not decreasing temperature less than 29 C. Can anyone help me why isn't cooling.
When I bought first peltier it was freezing in open condition but now it's performance dropped within a week, neither it consuming more than 2 amps current nor cooling to freeze either in a small covered box. It is 12706
da para fazer com o chip do computador par esfriar
da, mas vc tem que saber, que o seu ventilador them que ser muito poderoso, pq ele tem que compensar a energia thermica do seu chip do computador e a energia do tec1. e a potencia do seu tec1 pode ser major do que a energia do seu chip.
woooooooooooooooooow
kitne rupye ka hai indea ke
is past ka naam kya h
hello there from greece!! i have a lot of petier but its the 12706, i have put them on the ZALMAN (proclockers.com/reviews/cooling/zalman-cnps5x-sz-cpu-cooler) then thermal paste the peltier and then again thermal paste and a small heatshink. i have plug them in a ups battery 12V 7Ah but the temp goes to 23c and then again to 26c and stay there. i have try also with a psu from old computer but nothing, What i have done wrong????? i see all the people with peltier to freeze the heathink but mine nothing.
@@patrickimperial6003 hello again could u propose me a psu to reach the correct amps,, i have 6-7 peltier , can i connected all together? wait for your suggestion
i need this bro plzzzzz
Hi Abdullah
If you follow the link in the description you can find it.
Music again ;(((
Нет не правда
It fake