Unfortunately no. If you understood basic thermodynamics you would know that this type of setup (in this configuration at least) cant do anything apart from increase your energy bill. The reason this doesn’t work comes in with the way the heat exchange is set up. As we know, Peltier modules or Thermo electric devices, produce a cooling and heating effect on both sides. Which side gets hot and which side gets cool depends on the direction of the current AKA electron flow. Taking this into consideration, the whole reason AC works is because of the way temperature works. Temperature in itself is defined by the average of kinetic energies across all particles in a given amount of matter. So when we cool a room using AC what we are really doing is removing that kinetic energy from the matter present in the room (i.e. molecules in the air) and 'placing' it elsewhere, we do this using methods of thermal exchange. In this case heatsinks and rotating fans. So for AC (in simple terms) we need two main things. Something that provides a thermal flux, that is a flow in thermal energy. AND something to make the heat exchanges efficient so that we may move this heat elsewhere i.e. OUTSIDE of the room we are trying to cool. With a system like this, our component producing the thermal 'flux' is the Peltier module but in a more common device might be a compressor system. In a compressor system we use a closed loop refrigeration system (this is important) and we alter the pressure that a refrigerant is under. Because of the way the ideal gas law works, when we keep volume fixed (closed system), and pressure is increased (with a compressor for example) temperature must also increase in a fashion that is proportional to the increase in pressure. So, by lowering the pressure in one side of a closed loop, temp of the refrigerant drops and therefore absorbs heat from the surrounding air (via heat exchange methods - heatsinks and fans) and increasing the pressure on the other side, there will be a natural thermal flux between the two sides. The hot side of the AC will warm up as the cool side cools the room, as you may know energy can not be destroyed or created, it can only be moved and change in physical form. Due to this law your set up will not work in this layout. While you don’t use a compressor in your build the same logic applies. Our intention is to move the heat or kinetic energy out of the room but with your design the heat has nowhere to go. On both sides of your Peltier modules you have fans and heatsinks this is correct, but to truly cool the room we must move the heat elsewhere i.e. outdoors so it is not radiated back into the room (which is what happens with your setup). Now, another thing to consider is that no device in this world is 100% efficient so your Peltier modules may be 90% efficient at best and also resistance in wires results in further heat radiation. This means you aren’t even breaking even on your heating vs cooling power. This means as a NET total you will actually heat the room up as you are feeding electricity into a system with nowhere for the heat to go apart from back into the room you are trying to cool. ps. Ideal gas law: Pressure and volume of a given mass of gas at a constant temperature can be given by: P 1 × V 1 = P 2 × V 2 AND If you want to make this design in a way that actually cools the room then simply add a heat removal system. Basically the heatsink for the hot side should have a coolant flowing over it and then the now heated coolant should run to a radiator (with fans for higher efficiency) to a place you don’t mind heating up. This could be another room indoors but any sane person would put this outdoors, it just makes sense. I think a more accessible way to do this would to be to use a AIO liquid cpu cooler. By simply cutting the tubes that run from the radiator to the cpu block and adding a few more meters of tubing (and topping up the coolant after resealing the tubes) this i think would work pretty well as a heat exchange method. Another thing to note is that for this to be truly efficient, you should be using much finer heatsinks. Basically you want as much surface area to volume ratio to maximise heat transfer from the air to the cold side of the Peltier. I mean you could also probably use a cpu AIO cooler for this aswell. pps. Hope this makes sense! Don’t be fooled by these awfully seductive physics scams!
So basically, what you're saying is that the side that is heating up the room should be placed outside a window or something so that it actually helps the cool air flow a bit.
The heat from the heatsink isn't like the refrigerant that can flow easily in pipes, so I'm thinking maybe make the heatsink hot side contact with a circulating water source, which then the water goes through a few lengths inside a copper pipe with a fan blowing to reduce the water temperature, water is good at transferring heat. That will help keep the hot side under a manageable temperature.
Some RVs have compressor free 3way absorption refrigerator that could use induction as heat source, very efficient, ain't none on market yet, maybe in future, this is the way
Not practical end up paying higher electrical bills. Current draw more than the actual aircon unless use solar renewal energy also very expensive not worth the trouble.
The self-made cooler produces both hot and cold winds. What a stupid way to do it. It wastes only electricity and does not offset each temperature, so the average temperature goes higher.
This does not work. It produces more heat than cooling. Temp shows cooling at the heatsink, the air blowing through it will still be ambient. Peltier units are only efficient in small foam enclosed boxes for cooling.
Эта установка имеет смысл, если её задняя часть будет на улице, как оконный кондиционер... А так мы будем производить тепло и холод в одном помещении, смысл теряется от него.
Waste of time and accesries bcz there is no compressor and he fits only pc 12v dc fans which is not enough for air and these fans do not have air throw and speed/presure so don,t waste ur time.on this stupid.idea
Why is the cell on the cold side small? They cannot both be equally large so that by being able to reverse the polarity of the Peltier cell Can it heat and cool?
Creative, you can use the hot side to make a water heater.. using a peltier water block and a circulation pump. use enough water reservoir to retain heat. that way the hot side doesn't affect the room...
Bagian buangan hawa panasnya harus diarahkan lagi ke luar ruangan brow, ke bagian luar tembok dan disedot atau dibuang lagi dengan kipas yang lebih besar. Kalo nggak, hawa panasnya juga menyebar ke dalam.
It's not working and. It produces heat than cooling that is not AC that is heater. I tried to make and I make also but it produces heat please try new for us THANKS dear
Creo le faltaron ventiladores por la parte de atrás y un tubo para que salga el calor afuera de la casa porque si no pues lo que genera de frio tan bien lo genera de calor por atrás 😋
I hate to say it, but it isn't an air conditioner. What you're seeing is simply a simple fan. An air conditioner, unlike a fan, is a complicated mechanical device. The fundamental purpose of an air conditioner is to convert heat to cool air. It works by absorbing heat and then releasing it outdoors, which cools the inside air. This conversion method employs refrigeration cycles and heat exchange devices. Essentially, it converts hot air into cool air to keep the temperature tolerable. It may also reverse the process to create heat, making it suitable for all seasons. Heat exhaustion and chilly generation are important elements in its operation. So it's much more than merely blowing air, like a normal fan would do.
It was a creative idea But I wish you could cover the blower fan like a box to prevent the wind pressure of the blower fans from being wasted around and experience more wind pressure.
well, use thermoelectric peltiers be a cooler few years before ! the main point is must more power than home air conditioner's Compression motor ! so, that's good for private car inside only !
See what are you doing? Ans:- you are cooling and heating the desk, so do you think their will a temperature drop? Working of refrigerator cool from inside, hot outside. If I do both cool and heat inside it will neutralize the temperature. +++++++++++++++++++++++++++++ This model will precisely work perfect but need slight modification. ++++++++++++++++++++++++++++++ You may ask what modification? If you really want to make it cool then use water/bike coolant to treat heat. Use:- Small bucket with top lead covered. Fill the bucket with water or coolant. Buy Alumunium heat block big sized. Drill two holes on top of bucket lead to pass water pipes and use epoxy to secure the pipes or any leakage. Use 12v DC pump(not submersible) to pull out the water and send the coolant to alumunium block for greater heat exchange the pump should cycle this process. If the lead of bucket is covered then the hot water will not vapour which will indeed keep the room cold. If the hot water vapour come out of the bucket same problem you will face neutral temperature. ************************************* Don't secure the lead of the bucket permanently with epoxy or any sealant you may need to change the water when it get extreme hot. For water it may be necessary to change after 4-5 day use for coolant not necessary. +++++++++++++++++++++++++++++++ Try out this will work perfectly no outdoor unit required. After doing make a video. I am sure this will work as charm if all is perfectly assembled. Hot side instead of big heat sink, use alumunium block and don't joint cold and hot side with metals as will reduce efficiency use zip ties.
what if you let the cold water flow inside the tubes of a radiator while the fan makes the air pass through the cold radiator... will it work much efficiently cooler ?
![Yailin La Mas Viral, @kreizyk.official - Dale 2 (Remix) [Video Oficial]](http://i.ytimg.com/vi/JaYHBzgqz94/mqdefault.jpg)
Unfortunately no. If you understood basic thermodynamics you would know that this type of setup (in this configuration at least) cant do anything apart from increase your energy bill. The reason this doesn’t work comes in with the way the heat exchange is set up. As we know, Peltier modules or Thermo electric devices, produce a cooling and heating effect on both sides. Which side gets hot and which side gets cool depends on the direction of the current AKA electron flow. Taking this into consideration, the whole reason AC works is because of the way temperature works. Temperature in itself is defined by the average of kinetic energies across all particles in a given amount of matter. So when we cool a room using AC what we are really doing is removing that kinetic energy from the matter present in the room (i.e. molecules in the air) and 'placing' it elsewhere, we do this using methods of thermal exchange. In this case heatsinks and rotating fans. So for AC (in simple terms) we need two main things. Something that provides a thermal flux, that is a flow in thermal energy. AND something to make the heat exchanges efficient so that we may move this heat elsewhere i.e. OUTSIDE of the room we are trying to cool. With a system like this, our component producing the thermal 'flux' is the Peltier module but in a more common device might be a compressor system. In a compressor system we use a closed loop refrigeration system (this is important) and we alter the pressure that a refrigerant is under. Because of the way the ideal gas law works, when we keep volume fixed (closed system), and pressure is increased (with a compressor for example) temperature must also increase in a fashion that is proportional to the increase in pressure. So, by lowering the pressure in one side of a closed loop, temp of the refrigerant drops and therefore absorbs heat from the surrounding air (via heat exchange methods - heatsinks and fans) and increasing the pressure on the other side, there will be a natural thermal flux between the two sides. The hot side of the AC will warm up as the cool side cools the room, as you may know energy can not be destroyed or created, it can only be moved and change in physical form. Due to this law your set up will not work in this layout. While you don’t use a compressor in your build the same logic applies. Our intention is to move the heat or kinetic energy out of the room but with your design the heat has nowhere to go. On both sides of your Peltier modules you have fans and heatsinks this is correct, but to truly cool the room we must move the heat elsewhere i.e. outdoors so it is not radiated back into the room (which is what happens with your setup). Now, another thing to consider is that no device in this world is 100% efficient so your Peltier modules may be 90% efficient at best and also resistance in wires results in further heat radiation. This means you aren’t even breaking even on your heating vs cooling power. This means as a NET total you will actually heat the room up as you are feeding electricity into a system with nowhere for the heat to go apart from back into the room you are trying to cool.
ps.
Ideal gas law:
Pressure and volume of a given mass of gas at a constant temperature can be given by: P 1 × V 1 = P 2 × V 2
AND If you want to make this design in a way that actually cools the room then simply add a heat removal system. Basically the heatsink for the hot side should have a coolant flowing over it and then the now heated coolant should run to a radiator (with fans for higher efficiency) to a place you don’t mind heating up. This could be another room indoors but any sane person would put this outdoors, it just makes sense. I think a more accessible way to do this would to be to use a AIO liquid cpu cooler. By simply cutting the tubes that run from the radiator to the cpu block and adding a few more meters of tubing (and topping up the coolant after resealing the tubes) this i think would work pretty well as a heat exchange method. Another thing to note is that for this to be truly efficient, you should be using much finer heatsinks. Basically you want as much surface area to volume ratio to maximise heat transfer from the air to the cold side of the Peltier. I mean you could also probably use a cpu AIO cooler for this aswell.
pps.
Hope this makes sense! Don’t be fooled by these awfully seductive physics scams!
So basically, what you're saying is that the side that is heating up the room should be placed outside a window or something so that it actually helps the cool air flow a bit.
The heat from the heatsink isn't like the refrigerant that can flow easily in pipes, so I'm thinking maybe make the heatsink hot side contact with a circulating water source, which then the water goes through a few lengths inside a copper pipe with a fan blowing to reduce the water temperature, water is good at transferring heat. That will help keep the hot side under a manageable temperature.
Verdade.
Great air conditioner system
thank you so much
@@WEMYOUR you welcome 🙏
i think acrilic better, and 8 peltier fan big, difuser water coler for spray ice water
7:18 The heat sink fans are reversely installed! pulling air to back, not to in (front of this image shot view)
Pra resfriar o ambiente o ar quente tem que ser jogado para fora
The blue LED is the coolest part of the AC cause rest is all gimmicky
I know that you are from Bangladesh
Some RVs have compressor free 3way absorption refrigerator that could use induction as heat source, very efficient, ain't none on market yet, maybe in future, this is the way
People be asking "where did you get that aircon?" And then reply "i made it my self"
Its better to use air mudifier instead of that
Sir, Online se milega
Not practical end up paying higher electrical bills. Current draw more than the actual aircon unless use solar renewal energy also very expensive not worth the trouble.
идея неплохая, лучше вместо кнопки включения установить дистанционное включение
❤❤❤❤
Y en cuanto al ahorro de energía se cumple?
How much battery pover needed
Vc pod usar uma bateria de 12v ou uma fonte atx o mais recomendado e uma fonte atx 12v
The self-made cooler produces both hot and cold winds. What a stupid way to do it. It wastes only electricity and does not offset each temperature, so the average temperature goes higher.
I want to book this product...do you make it for me ?
This wont work in a room just buy a regular window aircon
Not benefits
Sale
Full flop this idia
It’s just a fan, no freon. It’s hot air coming out.
You: hot air
Thermometer: 10.2°C
This does not work. It produces more heat than cooling. Temp shows cooling at the heatsink, the air blowing through it will still be ambient. Peltier units are only efficient in small foam enclosed boxes for cooling.
Once check the placement of peltiears
this video is just a bait
People like you says it like "a fridge bakes stuff instead of chilling them"
This means that your room is hot or wherever you put the fan of the AC is hot. You need to put the fan in a colder area.😊
Heatsink and fan is produce heat instead of cold air because its warm in long time of using
lol... he turned on a real 2 ton ac in his room to drop the temperature.
Эта установка имеет смысл, если её задняя часть будет на улице, как оконный кондиционер... А так мы будем производить тепло и холод в одном помещении, смысл теряется от него.
Waste of time and accesries bcz there is no compressor and he fits only pc 12v dc fans which is not enough for air and these fans do not have air throw and speed/presure so don,t waste ur time.on this stupid.idea
Why is the cell on the cold side small? They cannot both be equally large so that by being able to reverse the polarity of the Peltier cell Can it heat and cool?
this is why we have units, measurements, it may cool its interiors but will never be enough for a room or even 1m2
Wt about hot air.. it will also flow in the same room ..right,?
Creative,
you can use the hot side to make a water heater.. using a peltier water block and a circulation pump.
use enough water reservoir to retain heat. that way the hot side doesn't affect the room...
ترجمة نص باستخدام الكاميرا
Where can I find the refrigerated plates please
this is the stupidest thing i have seen all night and i have alot of crap
Bagian buangan hawa panasnya harus diarahkan lagi ke luar ruangan brow, ke bagian luar tembok dan disedot atau dibuang lagi dengan kipas yang lebih besar. Kalo nggak, hawa panasnya juga menyebar ke dalam.
I will remove the refrigirator's door and put my chair inside it
It's not working and. It produces heat than cooling that is not AC that is heater. I tried to make and I make also but it produces heat please try new for us THANKS dear
Hey.! A question!! Did you copied this from a Telugu channel?? I see same cooler prepared a day before you. They are having huge subscribers than you.
Bisa di peuduk masal ini berapa harga nya ini
Üdv uram azért kíváncsi lennék hány fokot fúj ki magából ha elé teszel egy hőmérőt
Creo le faltaron ventiladores por la parte de atrás y un tubo para que salga el calor afuera de la casa porque si no pues lo que genera de frio tan bien lo genera de calor por atrás 😋
I hate to say it, but it isn't an air conditioner. What you're seeing is simply a simple fan. An air conditioner, unlike a fan, is a complicated mechanical device. The fundamental purpose of an air conditioner is to convert heat to cool air. It works by absorbing heat and then releasing it outdoors, which cools the inside air. This conversion method employs refrigeration cycles and heat exchange devices. Essentially, it converts hot air into cool air to keep the temperature tolerable. It may also reverse the process to create heat, making it suitable for all seasons. Heat exhaustion and chilly generation are important elements in its operation. So it's much more than merely blowing air, like a normal fan would do.
Yet this is not ac .but multiple times better than ac . Cause ac requires gases which harm the ozone later.
It was a creative idea
But I wish you could cover the blower fan like a box to prevent the wind pressure of the blower fans from being wasted around and experience more wind pressure.
이건 제습기도 아니고 뭘 만든거죠?
Then where does the hot air go?!
Mujhe send kardo ye ac please from nepal
thank for talk item😊😅
এই গুলো যেন এক সাথে জুরা দিসেন ভাই ঐ গাম টার নাম কি ভাই
💪 good, only your work deserve like!!
Copied video content 😂
From#Technical IND , channel
this is faltu😂
Pontelo en Sevilla a 48 grados jajaja 🤣
pembodohan
Plz ik pes mujy bana ker de Jo pese ho btade lele
Yeah that’s true all the hot air remains in the room😅
that cheats
no detail
AC banakar de Desi mere ko banakar de sakte ho aap
И через неделю все развалится,все на резинках...они же отвалятся
Measure the room temperature not device temperature
Copy cat
This plater olny 30 mint work after heat is start buren
Crap
This won't work a waste of time l have these Peltier they cannot take the heat
yes he is an idiot
Habis modal berapa itu
I need this type of Ac how much price ? how to book
Very nice ❤️❤️ #cactuselectronic
а тепло куда отходящие девать ?
Mantap
That is toy only
عمل جميل و لكن تركيب الأسلاك الكهربائية كنت سريعا
بتقدم التكنولوجيا اصبح بالإمكان تسريع الفيديو خلال المونتاج
🥀Mashallah🥀A C🥀🇵🇰
👌👌👌👌👌👌👌👌💙
Price Kya ha bhai g please
This iS cool or hot.?
🤣🤣🤣🤣🤣🤣🤣
Pls me 🙏🙏🙏🙏sir
Use this project for "mini fridge for cars, camps etc". But for rooms, its useless. Reason: Peltier modules are warms as well as cools. +1 -1 = 0.
Kreatif om
Sir 1Ac kavali sir
Se le puede conectar al auto?
❤❤❤❤
By link to bejo bhai
Wow
Bajat kitna ha...
Marvellous job,i admire you WEMYOUR👋
Thank You, Dear
WOW
💪👍👍🙏💪👍
Cool
❤❤ ye birds k cage me lagane chahe❤❤
Can i copy your project ideas and upload in my channel?
Yes
great job .. u r soo creative.. 😃👍
well, use thermoelectric peltiers be a cooler few years before ! the main point is must more power than home air conditioner's Compression motor ! so, that's good for private car inside only !
How much cost
India 6000 rupees cost
Useless. It both heat and cool.
try to understand 😂😂
he didnt put on the wall right..
Anda sangat keren banget.. dan kreatif 👍👍👍
Op bro
See what are you doing?
Ans:- you are cooling and heating the desk, so do you think their will a temperature drop?
Working of refrigerator cool from inside, hot outside.
If I do both cool and heat inside it will neutralize the temperature.
+++++++++++++++++++++++++++++
This model will precisely work perfect but need slight modification.
++++++++++++++++++++++++++++++
You may ask what modification?
If you really want to make it cool then use water/bike coolant to treat heat.
Use:-
Small bucket with top lead covered.
Fill the bucket with water or coolant.
Buy Alumunium heat block big sized.
Drill two holes on top of bucket lead to pass water pipes and use epoxy to secure the pipes or any leakage.
Use 12v DC pump(not submersible) to pull out the water and send the coolant to alumunium block for greater heat exchange the pump should cycle this process.
If the lead of bucket is covered then the hot water will not vapour which will indeed keep the room cold.
If the hot water vapour come out of the bucket same problem you will face neutral temperature.
*************************************
Don't secure the lead of the bucket permanently with epoxy or any sealant you may need to change the water when it get extreme hot. For water it may be necessary to change after 4-5 day use for coolant not necessary.
+++++++++++++++++++++++++++++++
Try out this will work perfectly no outdoor unit required. After doing make a video. I am sure this will work as charm if all is perfectly assembled.
Hot side instead of big heat sink, use alumunium block and don't joint cold and hot side with metals as will reduce efficiency use zip ties.
very cool
❤
Super this product how much
This wont work buy a regular window type air conditioner
what if you let the cold water flow inside the tubes of a radiator while the fan makes the air pass through the cold radiator... will it work much efficiently cooler ?
Wow..this is good😮😮😮