When I bought my bombard 360 and futura mk2, Mike was very helpful in walking me through the whole process. The whole crew at IBC do a great job! Very pleasant place to do business!
Thanks for posting this. It was very helpful. You must be better than myself as I needed two people jumping on the last boards to get them in to place... was scared I was gonna break something!
yes, we like to show real world experiences with out of the box assembly. no camera tricks or time compression just straight and honest like you would receive a new boat in the box.thanks for the comment beri
I have one from the 80's. Have to patch it periodically but I still love it. I usually put some air in it first before installing the floor boards. I also found sliding the oars under the boat lifts the floor boards up a bit. This helps when locking in the side slats
I have a Zodiac 340 (11 feet 2 inch) bought in the 80's. It was designed for 15 HP and about 4 people. Zodiac obviously never changed the design. I can remember every step to get it in one piece. But...I didn't had electrical blowers. Only a manual air pump.
I wish you would have shown the box or bag that you took it out of so we could see how easy/difficult it is for one person to carry while packed up. Can you put it on a back pack type rig or do you need a hand truck or something?
+Harley Wood that's great! most of the stuff I hear or see online about how their boat leaked or fell apart is 99.999% of the time on them and their lack of care of their boat. When things work great the inflatable boat gets no love but when something is wrong that's all you hear or see. It's a boat people, don't neglect it and you will get years of fun just like Harley Wood has.
A new MK2 Classic is a very tight boat, IBC recommends inflating it without the floor boards first then deflating it when you take delivery. This simple step will assist in fitting the floor boards as well as the stringers.
Why is it so hard to find info about an inflatable eg length, hp rating, material used, type of seams (welded glued etc)? None of the inflatables show it
because some cheaper chinese made boats use same material and thickness pvc, and it'd be bad for zodiac's sales. hypalon loses air faster than pvc and it prone to damage from UV rays. you are better off saving money and getting a seamax, kodiac, or something thats not absurdly priced like the zodiac.
we actually did it out of the box to show what you're in for without stretching or strain relieving the tubes(burping air into the boat). a new mk2 classic is very tight indeed out of the box and the factory sucks all of the air out for packing. when it's all sucked out it's more difficult to deal for sure. thanks for the comment!
This brings back (late 60s early 70s) memories for me when i bough my only brand new boat a Zodiac MK 1 10 foot 6 inches with wooden floor your boat must be later with its aluminium floor, with its Volvo Archimedes 25HP engine the MK2 was about 14 6 inches If i remember right n the MK2 compact about 12 foot something? but they are an extremely well build n very strong boats going by all the hammering my one had
I have had all four types, inflatable tubes only, rigid bottom, wooden or alu floor boards and high pressure inflatable floor. I much prefered the inflatable floor. Many many sail cruising years in Canada, the USA and the Carribean. PVC does not last 1/2 as long as hypalon. I also call all of them de-flatables. In time they leak air. Joints become unglued.
+Andre Laviolette no glue in a French welded pvc boat (unless they are really old), and the boats will last for as long as the care given to them no matter what material they are made of. Leave it out to die and it will just like anything else. I've used both types and have a more than a few miles sailing from the Arctic to the Antarctic and points between myself.
At least zodiac weld together as much as they can - tube seams, transoms, floors. They are worth the little bit of re-gluing every five years or so along the transom/ floor join. Not like most of the other crap on the market.
I am trying to put it together, but even tough I am trying to leave any folds under the floor I seem to have troubles with it. I have a futura mk3. First time out of box, I'll see if the air helps me
Gonzalo Busso try putting the bow bag under the bow when fitting the filoors. there is some bow rise in that design that if done flat will make your life hard. it should all align correctly once you have the rocker right.
haha! yeah it'll seem that way at first. it takes me 7 minutes to put it together once it's been used a couple of times.airfloors are definitely easier, and you can get one for the mk2 classic too.
+Ron Fletcher the Zodiac MK2 Classic is pretty upper level as far as recreational models go, we see many professional users utilizing this model probably even more than the recreational side of things. This model represents the quality French build people identify with as the gold standard.
Why didn’t u inflate the boat 40per first then add Those floor boards? All other vids I’ve seen they do the air first and looked a lot easier than no air/ flat. Great job thou. I guess both ways work.
Gonzalo Busso sometimes you need to put air in and let it out to get it to align, on this model there is bow rise that may give the illusion that it won't align. it usually does though.
Yeah, he made it look easy, now try doing this on uneven ground, in the pre-dawn darkness on the shores of a mosquitoe infested lake. I own this model, and TRUST me, it's not as easy to assemble as this guy makes it look!
Kevin Boomhower yeah it is tiring, but no surprises in this video, know what it is to do it right out of the box. the first one is definitely the hardest one.
the "side rails" are called stringers by "professionals", and putting 25% air in and trying to assemble the boat would be considered a rookie mistake.i guess you can't teach an old dog new tricks.
Completely baffled as to why the camera angle keeps changing to a side view which means you can't see *anything* that the demonstrator is doing (nice butt, though!)! It seems like the filmmaker has done it just to show off his film-making skills! A few close-ups of what is engaging with what at appropriate moments would make a huge difference to the effectiveness of the video.
HI THIS THE HEARD WAY TO DO THIS BOAT, OK IF YOU LIKE THE WALK ROUND A ROUND, BUT ALL YOU NEED TO DO IS PUT A LITTLE AIR IN, JUST TOO TAKE UP THE SIDES. THIS MAN WILL BE KNAKARD SOON, PS I DO HAVE A BOAT JUST LIKE THIS ,
I couldn't watch more than 6 minutes of this very painful demo. This guy makes you not want to even go to the showroom let alone buy one. I have owned Avon and Zodiac inflatables. They are not that difficult to assemble.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
When I bought my bombard 360 and futura mk2, Mike was very helpful in walking me through the whole process. The whole crew at IBC do a great job! Very pleasant place to do business!
Thanks for posting this. It was very helpful. You must be better than myself as I needed two people jumping on the last boards to get them in to place... was scared I was gonna break something!
yes, we like to show real world experiences with out of the box assembly. no camera tricks or time compression just straight and honest like you would receive a new boat in the box.thanks for the comment beri
thank you for sharing this video , really very helpful
I have one from the 80's. Have to patch it periodically but I still love it. I usually put some air in it first before installing the floor boards. I also found sliding the oars under the boat lifts the floor boards up a bit. This helps when locking in the side slats
I have a Zodiac 340 (11 feet 2 inch) bought in the 80's.
It was designed for 15 HP and about 4 people.
Zodiac obviously never changed the design.
I can remember every step to get it in one piece.
But...I didn't had electrical blowers. Only a manual air pump.
I wish you would have shown the box or bag that you took it out of so we could see how easy/difficult it is for one person to carry while packed up. Can you put it on a back pack type rig or do you need a hand truck or something?
This is a very useful demo!
Thanks!
I have a 1969 g.r. mk3. valves all still work great. Slight leak in keel.
I try to get it out once or twice a year. Still lots of fun.
+Harley Wood that's great! most of the stuff I hear or see online about how their boat leaked or fell apart is 99.999% of the time on them and their lack of care of their boat. When things work great the inflatable boat gets no love but when something is wrong that's all you hear or see. It's a boat people, don't neglect it and you will get years of fun just like Harley Wood has.
Only, instead of an electric pump, I would take a foot pump. By the way, please tell me which pump is included? Bravo 9 or Bravo 8M?
A new MK2 Classic is a very tight boat, IBC recommends inflating it without the floor boards first then deflating it when you take delivery. This simple step will assist in fitting the floor boards as well as the stringers.
Excellent travail
did they also had a GR MK2 Grand Raid for Army use? that f i remember right had some kind of self sealing tubes?
I heard the same thing
Why is it so hard to find info about an inflatable eg length, hp rating, material used, type of seams (welded glued etc)? None of the inflatables show it
because some cheaper chinese made boats use same material and thickness pvc, and it'd be bad for zodiac's sales. hypalon loses air faster than pvc and it prone to damage from UV rays. you are better off saving money and getting a seamax, kodiac, or something thats not absurdly priced like the zodiac.
Hello mate . What is the best inflatable sea boat? N how much it cost?
What;s the best type of RIB for bathymetry surveys? is it V-hulled?
nice Ib boat...👍
What 12V pump do you recommend for this boat? I see so many different kinds and I want to make sure the one I buy is strong enough.
It would not be bad idea to stock up on some air At the beginning then add your floorboards. then everything becomes much easier and faster.
we actually did it out of the box to show what you're in for without stretching or strain relieving the tubes(burping air into the boat). a new mk2 classic is very tight indeed out of the box and the factory sucks all of the air out for packing. when it's all sucked out it's more difficult to deal for sure. thanks for the comment!
Se debe
This brings back (late 60s early 70s) memories for me when i bough my only brand new boat a Zodiac MK 1 10 foot 6 inches with wooden floor your boat must be later with its aluminium floor, with its Volvo Archimedes 25HP engine the MK2 was about 14 6 inches If i remember right n the MK2 compact about 12 foot something? but they are an extremely well build n very strong boats going by all the hammering my one had
I have had all four types, inflatable tubes only, rigid bottom, wooden or alu floor boards and high pressure inflatable floor.
I much prefered the inflatable floor. Many many sail cruising years in Canada, the USA and the Carribean. PVC does not last 1/2 as long as hypalon. I also call all of them de-flatables. In time they leak air. Joints become unglued.
+Andre Laviolette no glue in a French welded pvc boat (unless they are really old), and the boats will last for as long as the care given to them no matter what material they are made of. Leave it out to die and it will just like anything else. I've used both types and have a more than a few miles sailing from the Arctic to the Antarctic and points between myself.
Jjjk
At least zodiac weld together as much as they can - tube seams, transoms, floors. They are worth the little bit of re-gluing every five years or so along the transom/ floor join. Not like most of the other crap on the market.
that boat kicks serious butt!
0636822218
Chkon l'I bari yemchi m3 aya nhargo fi Tanja ana Mohamed m'en mohammedia
I'm starting to think a drop stitch floor might be the way to go maybe fitting some thin carpet over to protect against hook mishaps
aarondavid826 we have only seen 2 hook holes in over 40 years of doing this.
aarondavid826 i've never seen a fish hook hole in a zodiac airfloor, i reccomend carpet for dogs so they don't slip around not for their nails.
@@IBCPortland how much mk2??
I am trying to put it together, but even tough I am trying to leave any folds under the floor I seem to have troubles with it. I have a futura mk3. First time out of box, I'll see if the air helps me
Gonzalo Busso try putting the bow bag under the bow when fitting the filoors. there is some bow rise in that design that if done flat will make your life hard. it should all align correctly once you have the rocker right.
I have a 1978 MK II, 14 foot. Is it PVC?
I believe that this video is the reason why Gilligan and the Skipper decided to stay on the island!!
Rob M maybey it's just not for you, try an airfloor if you aren't fit enough to assemble a boat.
Ray Gun Being fit is not the problem, It just looks bloody damn exhausting.
haha! yeah it'll seem that way at first. it takes me 7 minutes to put it together once it's been used a couple of times.airfloors are definitely easier, and you can get one for the mk2 classic too.
why are their only 3 primary tubes. If you puncture side tube ? i am going to buy a quality inflatable. Doing my research !
+Ron Fletcher the Zodiac MK2 Classic is pretty upper level as far as recreational models go, we see many professional users utilizing this model probably even more than the recreational side of things. This model represents the quality French build people identify with as the gold standard.
Out of curiosity Ron, what boat did you buy?
Why didn’t u inflate the boat 40per first then add Those floor boards? All other vids I’ve seen they do the air first and looked a lot easier than no air/ flat. Great job thou. I guess both ways work.
The whole on the first wooden part doesn't align with the valve. Will it align on its own after finishing floor assembly and stretching it?
Gonzalo Busso sometimes you need to put air in and let it out to get it to align, on this model there is bow rise that may give the illusion that it won't align. it usually does though.
How much would it cost without the motor?
very good
Very nice
Looks like a bit of a struggle, and this guy knows what he is doing!
AFAIK KIND oIjjkkkkkjllljjjh apaKOk just need more l
Ikajjhhhyyyann
c😧😧😢😢😢😴😴😮😢😢😢😯😑 😑 THE King aa a джжжзю مشمشمشمشىددظد
Yeah, he made it look easy, now try doing this on uneven ground, in the pre-dawn darkness on the shores of a mosquitoe infested lake. I own this model, and TRUST me, it's not as easy to assemble as this guy makes it look!
What country is this boat in?
Weight is another important spec usually not shown.....why?
Very nice can you ship out side us
How about the price? 3
واه كون كانت هاذي الفن كون خرجنا من جهنم
نشركو فها
how much for zodiac mkz classic assembly（20 minutes）lnflatable boat center
Slm fayin kayna had lamizon brina n3arfo
This for 4 persons only or what?
+ preliminary 7dk = Total 30dk
The boat needs to be inflated up to half for easy installation
what price ?
how can I buy such boats in saudi arabia??
What's the oldest zodiac you have seen?
+Harley Wood I have serviceable boats in the shop for detailing right now from the 60's that still bear the Zodiac dirigible logo on them.
Can i buy one?
where can I pick one up for free
+30minutes for filling up air to right pressure with the included foot pump.
only someone stranded on a deserted island would use the foot pump. it's 2018, use an electric pump.
takes me 10mins start to finish with a foot pump this guy had 2 birthdays whilst filming this
well i was going to get one like this. but it looks to much hard work. i think i will get a air deck rib
rookieg, I bought a 14' Lowe FM14 with evinrude 9.9 electric start for $600.00
You should inflate it first at least 30% before install the plates.
Thanks!
That floor looks like a pain to install.
How much pls
I was tired just watching that poor guy installing the floor.
Kevin Boomhower yeah it is tiring, but no surprises in this video, know what it is to do it right out of the box. the first one is definitely the hardest one.
A little hard work never hurt anyone
Boleh tau berapa harga sama ongkos kirim ke indonesia,sumatra barat kota padang
كيف يتم الحصول على واحدة
Finally - Now I know what killed Jacques Cousteau...............
Rob M ha! funny, this is a new boat out of the box experiance as one might expect to have for a fist time.
No esta en mercado libre los piso para gomon
the "side rails" are called stringers by "professionals", and putting 25% air in and trying to assemble the boat would be considered a rookie mistake.i guess you can't teach an old dog new tricks.
Çok güzel bir uğraş
Clandestino 🚣
الهجرة بجميع الوسائل
شحال من طانجا لاسبانيا نتا مغريبي
فين كاين هاد المحال فلمغريب
Completely baffled as to why the camera angle keeps changing to a side view which means you can't see *anything* that the demonstrator is doing (nice butt, though!)! It seems like the filmmaker has done it just to show off his film-making skills!
A few close-ups of what is engaging with what at appropriate moments would make a huge difference to the effectiveness of the video.
Muito bom pena q é muito caro vc conpra ate barato la mais pra vim pro brasil fica caro o frete
I'm thinking about to much job 🎣😫
bello
Too much work to assemble, I have a similar one and I wish I got the air deck
i would agree!
Do you ship to mexico?
Arnulfo Zepeda to spots that the freight carrier ships to.
الحرقة تنادي
Bachir Malabalich afin awlidi sifatli nmrtak
ali maroc oujda hak fb ta3i بشير عبشوبة
Wach andak watap
ali maroc oujda mes ana nskon fel Algérie
Kosniiii jowariii
Hello
le fameux zodiac
Merci pour votre vidéo c est pas très pratique à installer le fond dommage
Nice wourk i need your namper
b not p habebe
how to put someone off buying a SIB 1/3 inflate then
floor the inflate fully much quicker easier
Xin Chào , Cảm Ơn ....
الحرقة لمن اراد العيش الكريم.
Fin had lmahal o ch7al kadir le prix please
Ntfardo f chi whda a drari
Hoi ik ben nederlands
كاين شي حراكة هنا
mojodin
@@looksafi3459 finhoma
Toop
هاذ راقي خوش بلم عبور من تركيه الى اليونان
HI THIS THE HEARD WAY TO DO THIS BOAT, OK IF YOU LIKE THE WALK ROUND A ROUND, BUT ALL YOU NEED TO DO IS PUT A LITTLE AIR IN, JUST TOO TAKE UP THE SIDES. THIS MAN WILL BE KNAKARD SOON, PS I DO HAVE A BOAT JUST LIKE THIS ,
I couldn't watch more than 6 minutes of this very painful demo. This guy makes you not want to even go to the showroom let alone buy one. I have owned Avon and Zodiac inflatables. They are not that difficult to assemble.
lobster fishing in 20 mins..
شحال تمان
Nice of MOROCCO
chhal kaydir
الهربة تنادي
Airdeck under 10 min.
Und wieder bin ich froh ein GFK zu haben , wenn man sieht wi lange der Profi zum aufbau des Schlauchis braucht . Viel zu Anstrengend .
I will not be buying any inflatable boat any time soon .the person rely earns his wages
😏😒🙄🧐⌚
Kayser chi 5 mellion
Nimiro tlf
Chkon adrari l'I bari yehrag ana Mohamed m'en mohammedia
bow fishing in 20mins
now professional((
Κουράστηκα να σε βλέπω να το μονταρεις.Εγω οχι
to much work