******NOT sure if he still does this, so try to contact him before you order******** Join my discord server: discord.gg/quVwDbvkWx - be a part of a community!
Insane! I have something similar in my build but it is very bulky so to see a proper custom baffle system is amazing! Going to order the novritsch one when i have the funds :)
5:05 Pipe insulation foam is not the best option for airsoft suppressors as it doesn't absorb the air blast. It's "closed-cell" as it's designed to insulate the pipe from its surroundings. The "air blast" is just channelled through the foam and comes out the muzzle as if it's not there. The foam you need is "open-cell" foam. That's basically like a sponge, and it lets the air through it, but slows it down and disrupts the flow. It looks like the black foam you're cutting the circles from is open-cell. That's why it works better. Try making discs from the open-cell foam - it'll be better than your old setup.
@@kaslab hey seeing as you do quite some work with mtws you should look into the m4w, the new maxx hop designed for mtws. ( received mine if yesterday if u want info in it)
Ordered two sets from this guy on two different dates cuz the first one never showed up won’t return my emails or anything been months now be care ordering these
The airgun industry has been designing baffles specifically for air powered guns for a long time. Maybe look into getting an insert printed with one of them?
I would be very careful about making custom “airsoft silencers”. Even though this is obviously meant for airsoft and has foam between the baffles, if it has threads that will fit on a standard rifle thread it could plausibly be considered an unregistered NFA item by the AFT. Don’t want anyones dog getting shot.
I live in Denmark, we dont have real guns, people do crime with a wet noddle, so we good here, but people should obvious be aware where they live about the rules ;)
Noodles, it is the responsibility of free people to ignore unjust law. Any law repugnant to the Constitution is null and void. When everyone actually acts like the free people we are the ATF will be abolished.
hejsa kasper (går ud fra du hedder kasoer) hvor i landet spiller du? er selvl ved at anskaffe en mtw og laver en del digital grafik hvis du skulle ha lyst til noget digital artwork til din kanal, har været 3d specialist ved lego i 7 år men vil gerne støtte din kanal hvis du kan bruge noget gratisk grafik eller noget.
Hey Peter, der er Kasper ja ;) spiller lidt over hele Danmark men mest her over omkring Midtjylland, og det kunne da godt være brugbart, hvis du er medlem af min discord, kan det være jeg skriver ;) Edit: velkommen til MTw gang 🥳😂🔥👍
@@kaslab bor selv i Kolding og har kun spillet i Haderslev, havde ikke lige lagt mærke til din intro er da fed, men hvis du har lyst kunne jeg godt bruge noget netværk, uh jeg er gammel og holdte og med at game netop som discord blev normen, men selvfølgelig har jeg en diacord jeg ikke bruger. Jeg finder lige derind i løbet af weekenden ;) ha en go dag
@@jhonieve Hey mate I do not know what they are made off, but pretty sure they are 3D printed, and then you pair it with the sound filter/foam and it works waaay better, then just the avage foam filled supressor. Played with it sunday and it was so absurdly silent when outside and actually shooting a BB.. People 3+ meters away could not hear me when they had equipment on ;D!
******NOT sure if he still does this, so try to contact him before you order********
Join my discord server: discord.gg/quVwDbvkWx - be a part of a community!
Insane! I have something similar in my build but it is very bulky so to see a proper custom baffle system is amazing! Going to order the novritsch one when i have the funds :)
Yeah it works quite well, I still use it ;)!
Glad you like it! Give it a go on the field. Shooting a bb is far more quiet compared to the dry fire with the baffle setup 😉
Hay crazy tech I tried message you on Instagram but I would like to order these for my mtw if I can. How would I go about it?
Many thanks Mick
Hi I wanted to order too!
@@denkz the website will be online soon! Will make life a lot easier for everyone
@@TCTCustoms I'd like one too please ;)
@@TCTCustoms i want order also
5:05 Pipe insulation foam is not the best option for airsoft suppressors as it doesn't absorb the air blast. It's "closed-cell" as it's designed to insulate the pipe from its surroundings. The "air blast" is just channelled through the foam and comes out the muzzle as if it's not there.
The foam you need is "open-cell" foam. That's basically like a sponge, and it lets the air through it, but slows it down and disrupts the flow.
It looks like the black foam you're cutting the circles from is open-cell. That's why it works better.
Try making discs from the open-cell foam - it'll be better than your old setup.
It worked amazing before the upgrade, but even better after the upgrade ;)
I wish these were commercially available. It'd be great
I makes a lot of them ; )
@@kaslab hey seeing as you do quite some work with mtws you should look into the m4w, the new maxx hop designed for mtws. ( received mine if yesterday if u want info in it)
You should check put Rage Custom Cloak inserts, work brilliantly and you just put them in
Could be fun to test hehe
@@kaslab do it! He'll custom make them to whatever size you need and has some precuts for popular suppressors, work amazingly
@@shockwave.9749 Would be fun to test it against this ;)
Ordered two sets from this guy on two different dates cuz the first one never showed up won’t return my emails or anything been months now be care ordering these
Hello mate, after 2 years whats ur experience about this? Still using it or you found something better? Have you heard about Silverback suppressors?
I still use it, but he dosent sell anymore.. And I havent tried the silverback ones no.
@@kaslab thanks man, are there any other supps u can recommend?
The airgun industry has been designing baffles specifically for air powered guns for a long time. Maybe look into getting an insert printed with one of them?
maybe
Sounds exactly the same on youtube. Need a decible-o-meter.
Made a video where I compare and one where I show how it sounds at 3m 5m 10m 15m
Hast du einen link für die internels das Schalldämpfer?
Hey bro, this guy makes them instagram.com/tct__customs/ ;)!
13:01 Congratulations! You've made a grandpa farting replica. Zoomers...
Sounds very diffrent when there is no bb's it it bruv ; )
I would be very careful about making custom “airsoft silencers”. Even though this is obviously meant for airsoft and has foam between the baffles, if it has threads that will fit on a standard rifle thread it could plausibly be considered an unregistered NFA item by the AFT. Don’t want anyones dog getting shot.
I live in Denmark, we dont have real guns, people do crime with a wet noddle, so we good here, but people should obvious be aware where they live about the rules ;)
Noodles, it is the responsibility of free people to ignore unjust law. Any law repugnant to the Constitution is null and void. When everyone actually acts like the free people we are the ATF will be abolished.
What suppressor is it?
Good question but it's a 40mm width
@@kaslab I can't find anything that looks that nice and chunky
@@michaelpettit4053 that's what she said 🤭👍🔥
🔥💯
Loaf 🍞🍞🍞🍞🍞
Neat!
Yeah right! 👍
hejsa kasper (går ud fra du hedder kasoer) hvor i landet spiller du? er selvl ved at anskaffe en mtw og laver en del digital grafik hvis du skulle ha lyst til noget digital artwork til din kanal, har været 3d specialist ved lego i 7 år men vil gerne støtte din kanal hvis du kan bruge noget gratisk grafik eller noget.
Hey Peter, der er Kasper ja ;) spiller lidt over hele Danmark men mest her over omkring Midtjylland, og det kunne da godt være brugbart, hvis du er medlem af min discord, kan det være jeg skriver ;)
Edit: velkommen til MTw gang 🥳😂🔥👍
@@kaslab bor selv i Kolding og har kun spillet i Haderslev, havde ikke lige lagt mærke til din intro er da fed, men hvis du har lyst kunne jeg godt bruge noget netværk, uh jeg er gammel og holdte og med at game netop som discord blev normen, men selvfølgelig har jeg en diacord jeg ikke bruger. Jeg finder lige derind i løbet af weekenden ;) ha en go dag
Are those the 3D-printed mufflers? Sounds crazy silent!
Yeah it is, and then with foam around as you saw, it works amazingly outside ... OBW not as good indside 😂👍
@@kaslab i have seen the instagram post and the material is polyurethane, aren´t you? the foma is more compact
@@jhonieve Hey mate I do not know what they are made off, but pretty sure they are 3D printed, and then you pair it with the sound filter/foam and it works waaay better, then just the avage foam filled supressor. Played with it sunday and it was so absurdly silent when outside and actually shooting a BB.. People 3+ meters away could not hear me when they had equipment on ;D!
Use Oasis instead man👍
What's that?
@@kaslab just fill The supressor with that and ur airsoftgun will be silence 🤣
@@blomfeldt95 I men this works perfect, so I am happy, but thank you, I will keep it in mind! ;)
Wait, are you talking about an actual silencer for firearms??
@@magnumopus1628 Who? Not me atleast, airsoft you know ;)!
much waow much speedy much silent
Just wait for when I get to sweden! most silent speedy boi you'll ever see! ;D
Qué aburrido. Mucho relleno.
What?
demanding viewers to subscribe while waving a knife at the camera. Okay, okay!
Glad something worked hehe 👍😂🥳