28:24. I like these long videos, I play them in the background, listen, and look up occasionally as I'm working on my crawlers, drift car, and race buggies
Thanks Logan for all of your content on the rocks. I use your vids and commentary as educational. Once I started watching, about 6 months ago, my driving has gotten WAY better and I understand how a truck will react. Keep em coming, I got a lot to learn!
Crawler Canyon's sense of dry humor is part of the fun and what an amazing course/yard he's developing. I also enjoy your content whether it's the short or longer form. I've learned so much from your commentary on what you're looking for and doing during the wheeling. It's awesome
The big difference between the two is your tires. I run the pins on me bully and feel like they fold/conform more readily than thicker walled tires. I would try running the same set on each rig for a fairer comparison.106 degrees, holy shit! I cry around when it's 90°. Great content man, love the longer videos.
I like the content.. it’s always good and a teaching experience.. and the whole Matt’s off-road recovery was awesome! And I don’t mind the longer videos.. cause well the content is always great stuff.. so keep up the great work man!
You’ve done me a huge favor, was thinking I wanted a comp setup but after watching your vids I realize they aren’t for me. Super fragile and more like an insect than a truck/buggy to me. Love the channel, keep up the good work
Hmmm. I thought the opposite with my MOA. Very little to go wrong or break. Compared to 2 diffs. A transfer box. Gear box. Etc etc etc. I'd have killed a scaler many times over over the last 2 months. The moa. A few new servos due to user error.
This is a great video and a really entertaining watch. As a new RC addict the full length videos with the tips and instruction is vital. Personally I appreciate the chatter..it lets me know why you pick the lines you do. Helps me understand more how the trucks tend to perform under different situations.
22.25 minuites when you took the reverse. The rear wheels look like weren't square on to the climb.(hard to tell with the angle) Sometimes you can bounce it around gently with a few stabs of throttle wheel closest to the face bounces and let's the opposite wheel nudge in just enough to get some front dig traction to in pull you back around. Really enjoy your moa/sporty videos.
Looking at the tires on the MOA .. old school red rocks by Imex wouldn’t be beneficial if chopped and trimmed!? Those ledge grips would probably work over easier on the edges on the crawl up side. !???
Shout out to Crawler Canyon! It's an amazing channel. With so much to catch up on, if your new to it. Awesome to see the progression of rigs, courses and skills. And Logan, thank you for your content sir!
Well that was entertaining lol. Definitely interesting seeing the differences between the 2. I've got independent control of my front and rear drive on my MOA but no where enough drive time. The wheels are yet to see dirt....
Hey great video. First off I would love to point out how ridiculously awesome that 360 was at the beginning of the video and how you were able to keep it on its Wheels I thought it was flipping over for sure. And also i love watching these comp crawlers so incredible what they're able to do and it was really interesting seeing a shaft driven version of that I've never seen one before I've only seen the moa Bully and Clod buster axle setups. Are people still running clod buster axles or is it mainly just the bullies.
I watch crawler canyon all the time, WDW not so often. For some reason I like watching rocks in the garden like exocaged and crawler canyon way more interesting than crawling these red out in the desert rocks.
I'm definitely watching all the way through! Also you're not the only one destroying rigs lately lol Me and couple buddies took 5 rigs and only one survived after a couple hours and it was all electrical issues! Loving the videos and the humor in this one 😂
Love Sydney, love your cars and driving... new subscriber been catching as much as your videos as I can. Good job man also get another Capra!!! Enjoyed those videos!!!
I know this is old video, but im thinking of getting a bully ll. Are they fragile? Im driving on rocks not sandstone like you. Theres alot rolling down over sharp rocks. Should i just stick to my capra and scx10 llljeep?
I have a DX5 Pro for my MOA. It has a dig switch and a whole section for MOA. Why the Rugged? I replaced my Rugged with the Pro. And the Pro’s a badass transmitter. Designed to be customized to the individual driver. I love the drop down steering wheel. And for both crawlers - you only need the Pro. I sold the Rugged…
I wonder if two hobbywing fusions in the Moa would give it more of a "connected" feel like it was shaft driven since they would try and keep wheel speed the same.
I do run rear steer. Plenty of spots I saw there I'd have got past with a little rear steer. Find the rear weight advantageous though I do have a little more at the front to compensate.
I really like your channel very informative always let us know what you're doing and the running footage is long that's amazing especially to us RC Crawler guys that have them and don't have a real good place to run them thank you for sharing.🤣😂🤣💪🏻🔥😎🔥🤙🏻👏🏻👏🏻👏🏻 I'm curious on how your friend mounted his battery on the Dluxfab mercenary Chassis. Axle.
Careful showing your ballbag Logan , gotta save something for patreon buddy 😂😂👍👌 but in all seriousness , I really enjoy long form crawling videos with some insightful commentary. Am I ever gonna own my own MOA or shafty ? Probably not , but it's neat to see something a bit different that needs a whole different approach.
Kinda off topic question, but what kind of camera are you using to shoot your crawler videos? I drive over the road and was gonna start doing something like "Crawling Across the Country" and be in a different location every time. Thanks for all the great content and definitely making me aware of Rock Pirates RC.
Why did you get rid of the Phoenix? Now that they've dropped the price 20%, I'm really contemplating getting one. The only thing holding me back is I'm afraid it's a pricey unit for what performance it actually provides. Like you I have numerous capable rigs. Any thoughts you'd like to share?
I like your shaft driven crawler, i got one that is not as yours but still a lot of fun. what camera do you use for making your vids, or suggest? I'm gonna try to start making vids on all of my rcs, like the longer vids, and the humor😂😂
Hey mate, really love your vids. Quick question.. Whats your most capable, fun crawler? Your SCX10 ii comp crawler (with AR45's or F9 Curries) or the capra 4ws? Thanks!
Hi LOGON buddy great video from start to finish. I am always amazed how well these trucks preform but sorry but I think there ugly lol. MOA is my fav out the 2 so cool. Take care Buddy. Oh I'm looking forward to seeing your next trick 🤩😋✌🏼🤙🏼
@@westdesertwheeler2666 I 100% understand that and I feel the same way about the 24's That being said my daughter is way into them so therefore I play with them lol
28:24. I like these long videos, I play them in the background, listen, and look up occasionally as I'm working on my crawlers, drift car, and race buggies
Works for me dude! Thanks for tuning in
I think the MOA car's are growing on me. Some of those lines are crazy!
Thanks Logan for all of your content on the rocks. I use your vids and commentary as educational. Once I started watching, about 6 months ago, my driving has gotten WAY better and I understand how a truck will react. Keep em coming, I got a lot to learn!
Crawler Canyon's sense of dry humor is part of the fun and what an amazing course/yard he's developing. I also enjoy your content whether it's the short or longer form. I've learned so much from your commentary on what you're looking for and doing during the wheeling. It's awesome
The big difference between the two is your tires. I run the pins on me bully and feel like they fold/conform more readily than thicker walled tires. I would try running the same set on each rig for a fairer comparison.106 degrees, holy shit! I cry around when it's 90°. Great content man, love the longer videos.
I like the content.. it’s always good and a teaching experience.. and the whole Matt’s off-road recovery was awesome! And I don’t mind the longer videos.. cause well the content is always great stuff.. so keep up the great work man!
You’ve done me a huge favor, was thinking I wanted a comp setup but after watching your vids I realize they aren’t for me. Super fragile and more like an insect than a truck/buggy to me.
Love the channel, keep up the good work
Hmmm. I thought the opposite with my MOA. Very little to go wrong or break. Compared to 2 diffs. A transfer box. Gear box. Etc etc etc.
I'd have killed a scaler many times over over the last 2 months. The moa. A few new servos due to user error.
Yes rear dig is very useful and I do use it alot!
I have a Futaba 4pl and have a spare one new in the box as spare from times where I drove alot.
Man a Super Class would be cool on some of those lines!
This is a great video and a really entertaining watch. As a new RC addict the full length videos with the tips and instruction is vital. Personally I appreciate the chatter..it lets me know why you pick the lines you do. Helps me understand more how the trucks tend to perform under different situations.
22.25 minuites when you took the reverse. The rear wheels look like weren't square on to the climb.(hard to tell with the angle) Sometimes you can bounce it around gently with a few stabs of throttle wheel closest to the face bounces and let's the opposite wheel nudge in just enough to get some front dig traction to in pull you back around. Really enjoy your moa/sporty videos.
Still here buddy! You’re one of my favorites. Thanks for putting on a great show!
Looking at the tires on the MOA .. old school red rocks by Imex wouldn’t be beneficial if chopped and trimmed!? Those ledge grips would probably work over easier on the edges on the crawl up side. !???
Love that Moa!!! Love the course man! New sub! 👊🏼
I have been watching your videos and because I am fairly new to this you have helped me with some pointers
Shout out to Crawler Canyon! It's an amazing channel. With so much to catch up on, if your new to it. Awesome to see the progression of rigs, courses and skills.
And Logan, thank you for your content sir!
Well that was entertaining lol. Definitely interesting seeing the differences between the 2.
I've got independent control of my front and rear drive on my MOA but no where enough drive time. The wheels are yet to see dirt....
Your videos are the most helpful. Your explanations at each move are great tips and make me believe I can learn.
I noticed your unhappy with the radio used with the moa, particularly lack of front dig. So, what radio would you suggest for a newbie to acquire
Watch it all, and always pick up something from the runs that I can use later. Keep it up.
Watched like l always do from start to finish lol "Oooh Good Line" Classic!!!
Thanks for the content as always very informative.
My crawlers are more of a class 2 if I don't use my digg but your tips still help
Hey great video. First off I would love to point out how ridiculously awesome that 360 was at the beginning of the video and how you were able to keep it on its Wheels I thought it was flipping over for sure. And also i love watching these comp crawlers so incredible what they're able to do and it was really interesting seeing a shaft driven version of that I've never seen one before I've only seen the moa Bully and Clod buster axle setups. Are people still running clod buster axles or is it mainly just the bullies.
If your posting I'm watchin.so thanks enjoy all your vids.
Thank you!
I watch crawler canyon all the time, WDW not so often.
For some reason I like watching rocks in the garden like exocaged and crawler canyon way more interesting than crawling these red out in the desert rocks.
I'm definitely watching all the way through! Also you're not the only one destroying rigs lately lol Me and couple buddies took 5 rigs and only one survived after a couple hours and it was all electrical issues! Loving the videos and the humor in this one 😂
Haha yeah I started just letting loose at the end. Definitely more who I am all the time lol
Love Sydney, love your cars and driving... new subscriber been catching as much as your videos as I can. Good job man also get another Capra!!! Enjoyed those videos!!!
@26:45 that is typically a gate you can easily do with rear burn
Drink water grumpy lol
Love the video
Good vid thanks!
I know this is old video, but im thinking of getting a bully ll. Are they fragile? Im driving on rocks not sandstone like you. Theres alot rolling down over sharp rocks. Should i just stick to my capra and scx10 llljeep?
Where did you go missing those videos
I have a DX5 Pro for my MOA. It has a dig switch and a whole section for MOA. Why the Rugged? I replaced my Rugged with the Pro. And the Pro’s a badass transmitter. Designed to be customized to the individual driver. I love the drop down steering wheel. And for both crawlers - you only need the Pro. I sold the Rugged…
You should do a build rundown on the sporty
I wonder if two hobbywing fusions in the Moa would give it more of a "connected" feel like it was shaft driven since they would try and keep wheel speed the same.
local guy to me runs the fusions in his bully 2 moa car, hes super happy with it
I’ve seen one or two with them. Worth trying at some point
Why no one does rear wheel steering on the MOAs? Looks like it would be an obvious improvement.
Adds more rear weight. People do. I’ve driven one. I wanted to learn the car before adding rear steer. Also in the competitions it is not allowed
I do run rear steer. Plenty of spots I saw there I'd have got past with a little rear steer.
Find the rear weight advantageous though I do have a little more at the front to compensate.
Love the videos man! You’re killing it 👍!
I really like your channel very informative always let us know what you're doing and the running footage is long that's amazing especially to us RC Crawler guys that have them and don't have a real good place to run them thank you for sharing.🤣😂🤣💪🏻🔥😎🔥🤙🏻👏🏻👏🏻👏🏻 I'm curious on how your friend mounted his battery on the Dluxfab mercenary Chassis. Axle.
Crazy rigs. Great video man. Love the course.
Yeah it was a multi day video but always fun on the rocks
Logn, what kind of rims are those?
Careful showing your ballbag Logan , gotta save something for patreon buddy 😂😂👍👌 but in all seriousness , I really enjoy long form crawling videos with some insightful commentary. Am I ever gonna own my own MOA or shafty ? Probably not , but it's neat to see something a bit different that needs a whole different approach.
Thanks man. Love the channel
Thanks Jason! I appreciate you watching
Kinda off topic question, but what kind of camera are you using to shoot your crawler videos? I drive over the road and was gonna start doing something like "Crawling Across the Country" and be in a different location every time. Thanks for all the great content and definitely making me aware of Rock Pirates RC.
Gopro hero 8 black
Why did you get rid of the Phoenix? Now that they've dropped the price 20%, I'm really contemplating getting one. The only thing holding me back is I'm afraid it's a pricey unit for what performance it actually provides. Like you I have numerous capable rigs. Any thoughts you'd like to share?
I like your shaft driven crawler, i got one that is not as yours but still a lot of fun. what camera do you use for making your vids, or suggest? I'm gonna try to start making vids on all of my rcs, like the longer vids, and the humor😂😂
Hey mate, really love your vids. Quick question.. Whats your most capable, fun crawler? Your SCX10 ii comp crawler (with AR45's or F9 Curries) or the capra 4ws? Thanks!
Negative 5 for sporty for the clean backflip lol
You have a full build video on your sporty?
No I didn’t build it
@@westdesertwheeler2666 what motor is it running
You said that you bought your Bully2 built. Can you point me in a direction for a used bully 2
Facebook groups based on MOA cars
Would you consider that a medium or large ball bag? 😂
When it rains it pours!
Unfortunately true
I think the tires on the sport would been better also on the moa.
Always watch to the end!!! Goto never know what your gonna run into or do...
Thanks so much!
I learned two things from this video, you do swear sometimes, and it looks like ic5 connectors plug into xt60s, time well spent!
I swear a lot just not usually in video haha. Yeah in a pinch it works one way. IC3 into XT60 ESC
Got any info on that thumb lever extension on your dx5 rugged?
It’s from spektrum
@@westdesertwheeler2666 Do you have a part # or anything by any chance? Have looked and looked online and cant find anything.
Hi LOGON buddy great video from start to finish. I am always amazed how well these trucks preform but sorry but I think there ugly lol. MOA is my fav out the 2 so cool. Take care Buddy. Oh I'm looking forward to seeing your next trick 🤩😋✌🏼🤙🏼
You should so a scx24 series
They just don’t get me excited to crawl
@@westdesertwheeler2666 have you tried one before? They dont look very fun but they are.
@@westdesertwheeler2666 I 100% understand that and I feel the same way about the 24's That being said my daughter is way into them so therefore I play with them lol