A basic infrastructure job, yet the guy takes pride working in his "office" turning out soon to be buried pieces of art that so few in our society will ever see or appreciate but many will benefit from for years and years to come. Thanks for taking pride in your work and sharing your craft. I liked seeing the left hand action. Inspiration to practice more of that.
Hey Mr. flex good job I keep following thank you for your time bro let’s keep it up at the gym we’re looking good No lie I am going back into it myself got to go back to the gym I’m recovering from an injury 👍🏼👍🏼up💯
Great Job. looking from the outside.(I don't know if the inside welding result is a priority.) I bought a venor(130mig basic machine.) . Same results on the positive 42 on theirs more to to it?
So, where the rubber meets the road, what do you actually make in a year doing this job and what are your liabilities? You seem to have a pretty expensive truck with expensive upgrades, what does that cost? How long do you get out of a truck like that, how long does a welder last and what does it cost to replace?
if i’m wanting to start learning how to weld and do it as a job what is the best way, whether it’s going to a trade school or learning on my own for a bit any advice?
Don’t waste money on a school. Buy a stick welder and watch RUclips. Second thing, find a job that’s willing to let you become a helper and watch from there on out. After sometime they should let you start welding for them. Paid to learn
I have a few thousand, which is enough to get through foundations. Theres grants for trade school, but I'm in canada, so my situation might be different.
6010 is a fast freeze rod. Different folks use different techniques. For example many pipe line welders like to have a key hole open as there welding. Whipping in and out. One great welder Bob Moffet shows an example of his uphill 6010 he uses a drag technique similar to a 7018. It’s all depends on what your comfortable with
@@Luisloya.12 Looking at your welds they wouldn't even pass a visual much less ASME code nIne.The young welders that pass that 2 inch 6G ,344 wall test are making 55 dollars/hour davis bacon wages on these military bases.But they have to pass the test first.Unfortunately your instructors dropped the ball.Yea it is good to have a paycheck. Run of the mill pipewelders here in Alaska are making 45/hr.
Talk about sand and dirt I seen one of you fancy shirt wearing ,,, underneath a 36-in the only thing of him sticking out of the mud was his dry hand and his pancake I said that that's why I don't weld pipe
Learning how to weld with both hands is the absolute most useful thing I’ve learned
fact borther
My welding instructor told us that yesterday
Hi Luis we miss ur guys welding videos keep posting ur channel will grow we love the pipeline videos 🤙🏽 keep it up
I like the way everyone that pipe welds know so much. You guys are a dime a dozen. The man does a great job
A basic infrastructure job, yet the guy takes pride working in his "office" turning out soon to be buried pieces of art that so few in our society will ever see or appreciate but many will benefit from for years and years to come. Thanks for taking pride in your work and sharing your craft. I liked seeing the left hand action. Inspiration to practice more of that.
Good stuff bro. Every time I watch your welding videos it brings motivation to get my own rig going already😅. Keep them coming
So good to see you posting again.
2:38 saving this so I can comeback and listen to this guy in the background say “water for you no tequila wickey”
Hey Mr. flex good job I keep following thank you for your time bro let’s keep it up at the gym we’re looking good
No lie I am going back into it myself got to go back to the gym I’m recovering from an injury 👍🏼👍🏼up💯
Been welding for 4 years. Love watching your video
I love these videos. Learn something every time. 😂
man those new outlaw pancakes are next level … could measure the weight in grams instead of oz haha
Where do you find jobs like these? Do you have to bid on them?
It's hard to keep diet man! Lol coke is too damn tasty and a must with tacos. God Bless!
Good ole Willis, Tx🔥🔥
This action with the gas main is referred to a relay; almost always and almost only done for sewer or storm
How much pressure was on the line when you welded the weld-o-let’s on?
We always used 7018’s when welding them on.
Understanding the convo in the back> 😎
Mas videos asi parcero. Saludos 🇨🇴🇨🇴🇨🇴
Hello, great job. 18:20 What type of electrodes did you use? why top to bottom?
Hit that 22K quick.
Subbed. I feel inspired
need mo footage gee.. be well Luis 🤝🏿 GodbewithU
Bueno Amigo¡
Buen trabajo, felicitaciones!!🙂👍✌️…como se consigue esa careta para soldar?…
Great Job. looking from the outside.(I don't know if the inside welding result is a priority.) I bought a venor(130mig basic machine.) . Same results on the positive 42 on theirs more to to it?
Amigo cuánto tiempo te ausentaste .. aquí tu amigo Mario García
Eat good weld good babyyyy💪🏼💯
Ese Loya 🤘🏻🤘🏻🤘🏻
I see u have had both machines Miller and Lincoln, Which one worked best for you?
Like the video man 😎
You lost me with your workout videos, but now that your welding again, you gained my subscription back!
I’ll be posting more workout videos lol don’t sub back if welding is all you want out of me, I have a life outside of welding lol
@@Luisloya.12 looking at the views that your workout videos got, I’m guessing I’m not the only one who feels that way.
How much did you get paid for this job ?
So, where the rubber meets the road, what do you actually make in a year doing this job and what are your liabilities? You seem to have a pretty expensive truck with expensive upgrades, what does that cost? How long do you get out of a truck like that, how long does a welder last and what does it cost to replace?
Como estuvieron los tacos ! Maestro!!✌
That would be badass giveaway
Cada cuando volverás a subir videos .. en Que estado de USA . Te encuentras trabajando ,,, yo acá en Missouri
I’d love a pancake helmet
Ayeee cuhh let me be your helper 😂 I'm trynna learn from you
I need that pancake 😅
Chingon 👍🏼👍🏼👍🏼
if i’m wanting to start learning how to weld and do it as a job what is the best way, whether it’s going to a trade school or learning on my own for a bit any advice?
Don’t waste money on a school. Buy a stick welder and watch RUclips. Second thing, find a job that’s willing to let you become a helper and watch from there on out. After sometime they should let you start welding for them. Paid to learn
I have a few thousand, which is enough to get through foundations. Theres grants for trade school, but I'm in canada, so my situation might be different.
Well you pulled that out of Being level by Welding that one side 1st. That's something a rig Welder would do
They allow you to use down hill rods on live mains? Everywhere I have worked it’s gonna be low hydrogen on anything live.
That’s what i use to think till i came out with these guys
Do they have to X-ray those welds? Or not out in the field?
Doesn't look like they would pass. Especially those bottom welds on the green pipe. But hey , he is out there trying and learning ...
Thay won't let you use flux core on that little piece or tig it
Are you using any 7018 on other welds ?
Was wondering the same thing?
Love to have a pancake and stinger
Do you get paid per job or per hour?
What are those gloves called?
🔥
Is that in Willis tx?
Where did you get that eyebox for your pancake??
They come on the outlaw leather pancakes you have a choice of a wood or plactic and foam box, i have one and they are awesome!!!
@@nathanholbrook2233 oh nice! I’m going to check them out. Do the plastic ones have to be shaped too? Or are they more of a universal fit
It’s like ski goggles they fit pretty much everyone, super comfy
@@Luisloya.12 shit I need to get those then. I love my pancake but it hurts my head😂😂
Right on
Wait your telling me I’m busting butt waking up early to make a good healthy lunch and you don’t bring any tacos home for me😤🤬#busted
😂
Gas swing joint
Why use an E8010 on Grade WPB...??
That’s above my pay grade brotha man
Are you in the union?
Can you weld uphill?
If it’s metal I can weld it, doesn’t matter what process
I would get his money if I was in charge , payed by the hour to weld not film him self
I’m down for the giveaway
❤
At this point you might as well go work for center point bro hella more pay for their rig welders
Last time i watched you you stopped welding and was traveling around what happened to retirement
Decided to stack some more money to invest in a mini excavator it’ll be on the channel soon!
6:00
Niiiice, pick me boss...
What is the name of the welding shirts
Forge FR
Do you not use Europe grade welding masks?? Even Australia use them as they are better than them things your using
No, I use American grade, American made hood. 🇺🇸
Why do you guys whip so much
6010 is a fast freeze rod. Different folks use different techniques. For example many pipe line welders like to have a key hole open as there welding. Whipping in and out. One great welder Bob Moffet shows an example of his uphill 6010 he uses a drag technique similar to a 7018. It’s all depends on what your comfortable with
Your a cat fitter 😂😂😂
Man you ain't doing that right. I'm 67. My generation dropped the ball in teaching this one.
My paycheck says I’m doing it right
@@Luisloya.12 Looking at your welds they wouldn't even pass a visual much less ASME code nIne.The young welders that pass that 2 inch 6G ,344 wall test are making 55 dollars/hour davis bacon wages on these military bases.But they have to pass the test first.Unfortunately your instructors dropped the ball.Yea it is good to have a paycheck. Run of the mill pipewelders here in Alaska are making 45/hr.
Talk about sand and dirt I seen one of you fancy shirt wearing ,,, underneath a 36-in the only thing of him sticking out of the mud was his dry hand and his pancake I said that that's why I don't weld pipe
AC or DC? Very nice work!