All the times that I've been x-rayed I've never got to see this process and this makes me feel a whole lot better take the edge off of things knowing this thanks for sharing this
I got the chance to hang out with QC and X-Ray guys early in my welding career. I really believe it helped me to be a better welder faster. Mostly because the uncertainty of what they were looking for, and understanding the tolerances, helped me to just relax and weld. Your doing a great service to all of us, with your content. Really appreciate it, Thank You.
My daughter graduates HS in May, and is enrolled in Western Welding Academy in Gillette, Wyoming in August. We watch your vids together, regularly, and very much enjoy the entertainment and education…. Thanks for your channel and content.
It 🎉emember me in the 70’s when am start doing pipe in mexico we call “linerieros” in that time congrats don’t fell better than others is the best thing
😄👍 man.. here's an example.. My dad is a guitar pro, and for me, looking at him playing is crazy. It is impossible for me😄 I told him the same thing! "You make it look so easy"... everybody has a talent because of so many years of practice.. that's all it is man
Man, the sun fills good in winter.. that morning was cold, and i rather have my hands flexible and not freezing where you can't move them, lol! Anyway its all good 😉 On the X-rays procedure? not sure, I didn't even ask what procedure they were using..
El David es mi cuñado y el Alejandro mi carnal bro te reconoci en un video anterior k subiste y le comente a mi cuñado y dijo k simon es mi compa aqui jala conmigo haha que chido los videos saludos 👍🏽
Noob question, I know... Why bother starting at a lower amperage and then increase it? Always seemed to work better, for me, starting at a higher amperage and then decreasing it (easier starts).
In the beat? I actually decreased the amps when i started the beat.. it was a little bit too hot, but it worked out pretty well..I always set my machine on 65 but it was a little cold morning and this SA-200 tend to be a little hot in the mornings.. should have put it on 60 amps to start
I don't think so because they have to turn in every film of each weld to the company that hires them, so I don't think they are going to put their jobs on the line just for a bad weld.. just think about it.. imagine a bad weld blows up, they are going investigate who did that bad weld and also who X-ray that weld.. that's the whole point of X-ray, to prove that every weld is going to hold that pressure
@@gustavojr841 I was thinking more of flunking a good weld with the hope of taking more pictures and making more money. Like a factory where they think more will attempt the test if they fail a few. I was involved where this was pondered by me and the company I worked for. They wouldn't return the coupon or show the pass or fail. The coupon due to radiation but why not show the fail?
All the times that I've been x-rayed I've never got to see this process and this makes me feel a whole lot better take the edge off of things knowing this thanks for sharing this
I got the chance to hang out with QC and X-Ray guys early in my welding career. I really believe it helped me to be a better welder faster. Mostly because the uncertainty of what they were looking for, and understanding the tolerances, helped me to just relax and weld. Your doing a great service to all of us, with your content. Really appreciate it, Thank You.
My daughter graduates HS in May, and is enrolled in Western Welding Academy in Gillette, Wyoming in August. We watch your vids together, regularly, and very much enjoy the entertainment and education…. Thanks for your channel and content.
Thank you guys for watching!! Nice that your daughter likes to weld!! Keep it up! Welding is a good career!
Im 71 now and miss pipe welding and all the good old boys i worked with. Enjoy it while you can. The time goes by so fast .
I have never welded on pipeline. Thanks for the vid, it was awesome to see the xray procedure.
Thanks for sharing that process. Helps to have a better understanding of the Xray process.
Thank you! Appreciate the video!
Alright Gus way too go buddy🎉🎉
Awesome video
you are the best man !
Good luck brother hope you said your welding prayer be safe out there 🤙🏼
Good job 👏
Good job 👍🇺🇸🇨🇱✌️
Very nice weld. Like your style. Blessing brother from Nederland.
Good work man.
Hey Bro, you have your work cut out for to top the content in this video! Excelente 👏🏻
Bueno Migo
Bon Boulo 😆😆👍👍
Good job sir I aspire to have welds like yours one day.
It 🎉emember me in the 70’s when am start doing pipe in mexico we call “linerieros” in that time congrats don’t fell better than others is the best thing
Muy buen video, así mas contenido en español sería bueno saludos de Colombia
Muchas gracias!! Saludos!!
The Unemployment Truck😊😊😊
😂👍
I’m tryin to get back on the line Gus. Been 8 years so I’m rusty. Around what setting are capping with 5’s? 80?? Keep in up Primo
What's up Cody!😀 Yes, it should of been around 85.
Great video, just out of curiosity what’s with the huge lens on the pancake?
Thank you! This pancake hood with a big lens is one of my creations, lol.. I actually built it
I enjoyed the behind the scenes...I don't know why ..but during the x-ray I always stress..
How do you make it look so easy haha. trying to get just like you brother!
😄👍 man.. here's an example.. My dad is a guitar pro, and for me, looking at him playing is crazy. It is impossible for me😄 I told him the same thing! "You make it look so easy"... everybody has a talent because of so many years of practice.. that's all it is man
I use to Weld for a livin...Then My Dumb ass got Adventurous and Decided to become a Driller 😂 keep welding my Brothers 💪trust me
How do y’all x-ray that big ass pipe? The one that has to go in the ground. 😂😂😂😂😂
Sun in your eyes get that pipeline cloud up especially on a Re-qual…… this an API 1104 re-qual ?
Man, the sun fills good in winter.. that morning was cold, and i rather have my hands flexible and not freezing where you can't move them, lol! Anyway its all good 😉 On the X-rays procedure? not sure, I didn't even ask what procedure they were using..
Does your pancake lens flash when you grind?
Yes, a little bit.. I have the sensitivity set on 0, so it gives me a little chance to see while grinding
Thats me 😃 "xray"
Estodo carnal!! 😃👍 muchas gracias de nuevo!!
@@gustavojr841 A usted gracias por la oportunidad carnal 💪🏻💯 Badass welds !
Where did you get that pancake hood?
I actually built it myself.. You can go se my other videos on my Channel.. Thanks for watching 😉
El David es mi cuñado y el Alejandro mi carnal bro te reconoci en un video anterior k subiste y le comente a mi cuñado y dijo k simon es mi compa aqui jala conmigo haha que chido los videos saludos 👍🏽
Muchas gracias carnal!! 😃👍Si ay andamos trabajando juntos pero en diferente locación, chulada de viejos! Saludos!
Noob question, I know... Why bother starting at a lower amperage and then increase it? Always seemed to work better, for me, starting at a higher amperage and then decreasing it (easier starts).
In the beat? I actually decreased the amps when i started the beat.. it was a little bit too hot, but it worked out pretty well..I always set my machine on 65 but it was a little cold morning and this SA-200 tend to be a little hot in the mornings.. should have put it on 60 amps to start
@@gustavojr841 Fair enough. Thanks for the reply.
Thank you for expressing your thoughts😉👍
What rod are you burning for that root ?
I use 1/8 5p+ for the root
Videos en español
Where’d you get that hood?
I actually built it myself.. You can go see one of my previous videos. Is about me making one of those pancake hood with big lens
I forgot. Did you give the x-ray guy a 100 or 200?😅😅😅
🫣😂😂😂😂
Ever suspect the x ray guys of cheating ?
I don't think so because they have to turn in every film of each weld to the company that hires them, so I don't think they are going to put their jobs on the line just for a bad weld.. just think about it.. imagine a bad weld blows up, they are going investigate who did that bad weld and also who X-ray that weld.. that's the whole point of X-ray, to prove that every weld is going to hold that pressure
@@gustavojr841 I was thinking more of flunking a good weld with the hope of taking more pictures and making more money. Like a factory where they think more will attempt the test if they fail a few. I was involved where this was pondered by me and the company I worked for. They wouldn't return the coupon or show the pass or fail. The coupon due to radiation but why not show the fail?
Is this Midland?
This is north of Odessa
@@gustavojr841 I’m down here from Wyoming doing some work for Granite Peak Fabrication. I just guessed where it was.
You can tell because of this beautiful terrain 😄
They all pass? Did anyone bust out?
I know of three guys who didn't pass 😬
@@gustavojr841 That's too bad
How much you pay the new guy 😮 that to much 😂😂
😂😂😂
Y’all need any helpers?
We do need helpers man! But this company doesn't let us hire any
They sale a flip lens pancack I have one works great
Seen those, they ay great when you have to grind! Just flip it and grind without turn dark while you grind